A strong choice for a 6.0 LS is a plate kit that matches the engine’s throttle-body pattern and offers a usable range of jetting; the Nitrous Express 78mm 3-bolt kit suits buyers whose intake has that fitment. This roundup compares seven kits, but they are not interchangeable: listed options range from 78mm 3-bolt plates to 90mm and 102mm plates, while one kit is specified for 2010-and-newer V8 Camaros. Power options also vary, from 50–400 horsepower jetting on several Nitrous Express plates to 100–250 horsepower on the Cold Fusion kit.
Check the throttle body, intake, vehicle application, bottle inclusion, and system details before choosing. Product descriptions do not establish compatibility with every 6.0 LS combination, so verify fitment with the manufacturer before installation.
The Nitrous Express 78mm EFI Kit is the leading choice when your 6.0 LS has a 3-bolt throttle body and compatible intake. Its billet plate fits car and truck intakes with that pattern, and the listed jetting spans 50 to 400 horsepower at the wheels. It also includes a ProPower Lightning series solenoid.
The listing does not specify a bottle size, so confirm what is included and verify the plate’s fit before ordering.
Our Top Picks
Best OverallIts billet 78mm plate fits car and truck intakes with a 3-bolt throttle body, with listed jetting from 50 to 400 horsepower at the wheels.
View on Amazon
Best 15lb BottleNitrous Express 78mm Plate Kit
This 3-bolt 78mm plate is intended for GM LS car and truck intakes and includes a 15-pound bottle; its listing describes jetting up to 400 horsepower.
View on Amazon
Best Dual-Stage UpgradeNitrous Express 90mm Plate Kit
The 90mm LS plate includes 50–400 horsepower jetting and a 5-pound bottle, and its pre-machined passages allow a dual-stage upgrade with NX933D.
View on Amazon- Best FAST 102 Fit Nitrous Express 102mm Plate Kit
Compare the kits by fit, included components, and intended use
| # | Product | Weight | Material | Buy |
|---|---|---|---|---|
| 1 | 1. Nitrous Express 78mm EFI KitBest Overall | 22 lb | Plastic | View on Amazon |
| 2 | 2. Nitrous Express 78mm Plate KitBest 15lb Bottle | — | plastic | View on Amazon |
| 3 | 3. Nitrous Express 90mm Plate KitBest Dual-Stage Upgrade | — | — | View on Amazon |
| 4 | 4. Nitrous Express 90mm EFI Kit90mm four-bolt EFI setup | 22 lb | Plastic | View on Amazon |
| 5 | 5. Nitrous Express 102mm Plate KitBest FAST 102 Fit | — | — | View on Amazon |
| 6 | 6. Cold Fusion GM Plate Kit90mm multi-engine complete kit | 24 lb | — | View on Amazon |
| 7 | 7. Nitrous Express LS3 Camaro Kit2010-and-newer Camaro fit | 20 lb | Plastic | View on Amazon |
Detailed Reviews: Best Nitrous Kit For 6 0 Ls

#1 · Best Overall
1. Nitrous Express 78mm EFI Kit
- Weight: 22 lb
- Material: Plastic
Best for: Three-bolt LS intake match.
Why it ranks #1: Its billet 78mm plate fits car and truck intakes with a 3-bolt throttle body, with listed jetting from 50 to 400 horsepower at the wheels.
The 78mm billet plate fits car and truck intakes with a three-bolt throttle body, giving those LS setups a plate-mounted route for nitrous and fuel delivery. Its included jetting spans eight listed wheel-horsepower levels, from 50 to 400, so buyers can select among several supplied power options.
The plate bolts between the throttle body and intake, a placement the supplied description identifies as making installation quick and straightforward. Its 78mm size and three-bolt fit criteria help narrow compatibility to the listed intake configuration rather than an unspecified LS setup. Included jetting covers 50, 100, 150, 200, 250, 300, 350, and 400 horsepower at the wheels, while the ProPower Lightning series nitrous solenoid is part of the system. Check the throttle-body bolt pattern before choosing it.
- Billet aluminum plate
- Fits listed car and truck intakes with a three-bolt throttle body
- Bolts between throttle body and intake
- Jetting supplied from 50 to 400 wheel horsepower
- Fit is limited to intakes with a three-bolt throttle body.
Skip it if you have a 90mm throttle body with a four-bolt pattern; Nitrous Express 20934-10 is the listed four-bolt option.
This suits an LS owner whose intake uses a 78mm, three-bolt throttle body and who wants multiple supplied jetting choices. Its stated fit is specific, so verify that configuration before selecting it for a car or truck.
Full product details
| Brand | Nitrous Express |
|---|---|
| Color | Standard |
| Included Components | Nitrous Express 20935-10 78mm EFI Nitrous Kit with 3-Blot Plate for GM LS Engine |
| Item Dimensions LxWxH | 0.00 x 0.00 x 0.00 inches |
| Item Package Dimensions L x W x H | 28.2 x 10.9 x 9.6 inches |
| Item Weight | 22 pounds |
| Manufacturer | Nitrous Express Inc. |
| Material | Plastic |
| Model | Nitrous Express 20935-10 78mm EFI Nitrous Kit with 3-Blot Plate for GM LS Engine |
| Package Weight | 22.3 pounds |
| Size | One Size |
| Warranty Description | Warranty |
Listed on Amazon as: Nitrous Express 20935-10 78mm EFI Nitrous Kit with 3-Blot Plate for GM LS Engine
View on Amazon
#2 · Best 15lb Bottle
2. Nitrous Express 78mm Plate Kit
- Material: plastic
Best for: Three-bolt kit with 15-pound bottle.
Why it ranks #2: This 3-bolt 78mm plate is intended for GM LS car and truck intakes and includes a 15-pound bottle; its listing describes jetting up to 400 horsepower.
The 78mm billet aluminum plate fits car and truck intakes with a three-bolt throttle body, and this version includes a 15-pound bottle. That combination gives LS buyers a specific intake-pattern match and a defined bottle size, alongside the included ProPower Lightning series nitrous solenoid.
The plate installs between the throttle body and intake, with the listed three-bolt fit helping buyers identify whether their setup matches. Its jetting is stated at 50, 100, 150, 200, 250, 300, 350, and 400 horsepower at the wheels, offering several supplied selections. The included 15-pound bottle gives this package a larger stated capacity than the 5-pound version, while the ProPower Lightning series nitrous solenoid is also included. The listing’s stated fit remains tied to a 78mm, three-bolt throttle body.
- 78mm billet aluminum plate
- Fits listed car and truck intakes with a three-bolt throttle body
- Includes a 15-pound bottle
- ProPower Lightning series nitrous solenoid included
- Fit is limited to intakes with a three-bolt throttle body.
Skip it if you need a 90mm plate and have a FAST 102 intake; Nitrous Express 20933-15 lists that intake fit and a 15-pound bottle.
This suits an LS owner with a 78mm, three-bolt throttle body who wants the listed 15-pound bottle and included solenoid. Its fit description is specific to that bolt pattern, so match the intake before choosing it.
Full product details
| Brand | Nitrous Express |
|---|---|
| Color | Standard |
| Included Components | Nitrous Express – GM LS 78mm 3-Bolt Nitrous Plate Kit (50-350HP) w/15lb Bottle (20935-15) |
| Item Dimensions LxWxH | 0.00 x 0.00 x 0.00 inches |
| Item Package Dimensions L x W x H | 7.87 x 7.87 x 7.87 inches |
| Manufacturer | Nitrous Express |
| Material | plastic |
| Model | Nitrous Express – GM LS 78mm 3-Bolt Nitrous Plate Kit (50-350HP) w/15lb Bottle (20935-15) |
| Package Weight | 2000 g |
| Size | One Size |
| Warranty Description | Warranty |
Listed on Amazon as: Nitrous Express – GM LS 78mm 3-Bolt Nitrous Plate Kit (50-350HP) w/15lb Bottle (20935-15)
View on AmazonWhy it ranks #3: The 90mm LS plate includes 50–400 horsepower jetting and a 5-pound bottle, and its pre-machined passages allow a dual-stage upgrade with NX933D.
A 90mm billet plate paired with a 5-pound bottle makes this Nitrous Express package a clearly specified option for LS buyers matching that plate size. The single-stage system includes jetting from 50 to 400 horsepower and has pre-machined passages for a possible dual-stage upgrade.
The plate bolts between the throttle body and intake, giving the installation a defined position in the intake tract. Its 90mm size is the key fit identifier, while the included 5-pound bottle sets the package’s stated bottle capacity. Jetting is listed at eight levels from 50 through 400 horsepower for the supplied single-stage arrangement. The plate also has a second set of nitrous and fuel passages machined in; adding NX933D is the stated route to dual-stage operation.
- 90mm billet plate
- Includes a 5-pound bottle
- Jetting supplied from 50 to 400 horsepower
- Pre-machined second passages support an NX933D upgrade
- The included 5-pound bottle is smaller than the 15-pound bottle in Nitrous Express 20933-15.
Skip it if you want the listed 15-pound bottle and have a FAST 102 intake; Nitrous Express 20933-15 specifies that combination.
This is for an LS buyer matching the 90mm plate who prefers the stated 5-pound bottle and wants broad single-stage jetting choices. The fit description does not name a specific intake family, so confirm the 90mm application.
Full product details
| Brand | Nitrous Express |
|---|---|
| Item model number | 20934-05 |
| Manufacturer | Nitrous Express |
| Part Number | 20934-05 |
| Model | Nitrous Express – GM LS 90mm Nitrous Plate Kit (50-400HP) w/5lb Bottle (20934-05) |
Listed on Amazon as: Nitrous Express – GM LS 90mm Nitrous Plate Kit (50-400HP) w/5lb Bottle (20934-05)
View on AmazonWhy it ranks #4: This EFI plate kit is specified for a GM LS engine with a 90mm, 4-bolt plate, though the supplied listing omits its jetting range and bottle details.
A 90mm EFI plate and four-bolt configuration distinguish this Nitrous Express kit for GM LS applications. The title identifies the throttle-body size and bolt pattern, giving buyers concrete fit criteria to compare with their intake before selecting this system for an LS installation.
The supplied title describes this as a 90mm EFI nitrous kit with a four-bolt plate for a GM LS engine. Those named details let buyers screen for a matching throttle-body size and bolt pattern before ordering, rather than relying on the broad LS label alone. The product information does not specify jetting levels, bottle size, solenoid details, or installation components, so those cannot be used to assess its operating range or completeness. Its listed fit criteria are the clearest basis for a choice.
- 90mm plate size stated in the title
- Four-bolt plate configuration stated
- Identified as an EFI nitrous kit
- Listed for GM LS engines
- The supplied product details do not state jetting levels or bottle size.
Skip it if you need listed jetting choices and a stated bottle size; Nitrous Express 20933-15 specifies both for a FAST 102 intake.
Choose this only when a GM LS application calls for the listed 90mm, four-bolt EFI configuration. The available details establish those fit identifiers, but do not give jetting, bottle, or solenoid information for evaluating the rest of the setup.
Full product details
| Brand | Nitrous Express |
|---|---|
| Color | Standard |
| Included Components | Nitrous Express 20934-10 90mm EFI Nitrous Kit with 4-Bolt Plate for GM LS Engine |
| Item Dimensions LxWxH | 0.00 x 0.00 x 0.00 inches |
| Item Package Dimensions L x W x H | 28 x 11.5 x 10 inches |
| Item Weight | 22 pounds |
| Manufacturer | Nitrous Express Inc. |
| Material | Plastic |
| Model | Nitrous Express 20934-10 90mm EFI Nitrous Kit with 4-Bolt Plate for GM LS Engine |
| Package Weight | 22.6 pounds |
| Size | No Size |
| Warranty Description | Warranty |
Listed on Amazon as: Nitrous Express 20934-10 90mm EFI Nitrous Kit with 4-Bolt Plate for GM LS Engine
View on AmazonWhy it ranks #5: Its billet 102mm plate fits FAST 102 intakes and includes 50–400 horsepower jetting plus a 15-pound bottle, but the intake fit is specific.
The billet 102mm plate fits FAST 102 intakes, making this Nitrous Express kit a specifically matched option for that intake family. Its supplied jetting covers 50 through 400 horsepower, and the pre-machined second passages leave a stated path to a dual-stage upgrade.
The plate bolts between the throttle body and intake, while its FAST 102 fitment gives buyers a named intake target for checking compatibility. As supplied, the system is single stage and includes jetting at eight levels from 50 to 400 horsepower. A second set of nitrous and fuel passages is already machined into the plate; adding NX933D can convert the setup to dual stage. The included 15-pound bottle gives the package a defined bottle size, but the listing does not specify operating duration.
- Billet plate fits FAST 102 intakes
- Bolts between throttle body and intake
- Jetting spans 50 to 400 horsepower
- Pre-machined passages support an NX933D dual-stage upgrade
- The supplied configuration is single stage; dual-stage operation requires adding NX933D.
Skip it if you have a 90mm throttle body rather than a FAST 102 intake; Nitrous Express 20934-05 is the listed 90mm plate kit.
This fits buyers with a FAST 102 intake who want broad supplied jetting and a stated route to dual-stage operation. Confirm the intake match, and note that the dual-stage upgrade requires the separately named NX933D part.
Full product details
| Brand | Nitrous Express |
|---|---|
| Item model number | 20933-15 |
| Manufacturer | Nitrous Express |
| Part Number | 20933-15 |
| Model | Nitrous Express – GM LS 102mm Nitrous Plate Kit (50-400HP) w/15lb Bottle (20933-15) |
Listed on Amazon as: Nitrous Express – GM LS 102mm Nitrous Plate Kit (50-400HP) w/15lb Bottle (20933-15)
View on AmazonWhy it ranks #6: The complete wet kit fits specified 2005-and-newer LS2 and LS3 applications with a 90mm throttle body, but its listed jetting tops out at 250 horsepower.
Compatibility with LS2, LS3, LT1, and LT4 engines using a 90mm throttle body gives this Cold Fusion kit a broad, explicitly named application range. Its complete-kit listing includes a bottle, brackets, gauge, and controls, while supplied jetting covers five stated power options.
The kit names 2005-and-newer Camaro, GTO, and Corvette applications with a 90mm throttle body, helping buyers check both vehicle family and intake configuration. Included jetting covers 100, 125, 150, 200, and 250 horsepower. The package also lists a bottle with brackets, bottle nut, and gauge, plus stainless braided hoses, a WOT switch, wiring kit, relay, and toggle switch. One pro nitrous and one pro fuel solenoid are included, each rated for up to 350 horsepower.
- Lists compatibility with LS2, LS3, LT1, and LT4 engines
- Specifies 90mm throttle-body applications
- Includes jetting for 100 to 250 horsepower
- Bottle, brackets, gauge, hoses, and controls listed
- Listed jetting tops out at 250 horsepower.
Skip it if you need supplied jetting above 250 horsepower; Nitrous Express 20933-15 lists jetting through 400 horsepower for FAST 102 intakes.
This suits owners of the named 2005-and-newer Camaro, GTO, or Corvette applications with a 90mm throttle body who want listed kit components and several jetting choices. Its supplied options stop at 250 horsepower.
Full product details
| Brand | Cold Fusion Nitrous |
|---|---|
| Item Weight | 24 pounds |
| Item model number | CFN-1106 |
| Manufacturer | Cold Fusion Nitrous |
| Part Number | CFN-1106 |
| Model | LS2 PLATE KIT COMPLETE |
Listed on Amazon as: GM Nitrous Plate Kit | Cold Fusion Nitrous | Compatible with LS2, LS3, LT1, LT4 | Compatible with 2005-Newer 90mm Throttle Body GM Engines | Complete Kit
View on Amazon
#7
7. Nitrous Express LS3 Camaro Kit
- Weight: 20 lb
- Material: Plastic
Best for: 2010-and-newer Camaro fit.
Why it ranks #7: This wet single-stage kit is listed for 2010-and-newer V8 Camaros, not broadly for 6.0 LS applications; its fitment limits its usefulness here.
Direct-fit application details for 2010-and-newer V8 Camaros distinguish this wet, single-stage LS3 plate system from broadly described LS kits. Nitrous Express says 3D scanning informed its fitment, while the listed hardware supports do-it-yourself installation on the stated vehicle application.
The listing identifies 2010-and-newer V8 Camaros and describes the system as a direct-fit Street Series plate setup. Its use of 3D scanning during development is tied to OEM-like fitment, helping buyers assess whether the application is aimed at their vehicle rather than a universal LS fit. The listing also says the package includes hardware for do-it-yourself installation. It specifies a wet, single-stage system and a 10-pound bottle, but does not give jetting details in the supplied key features.
- Listed for 2010-and-newer V8 Camaros
- Direct-fit Street Series system
- 3D scanning used during development for fitment
- 10-pound bottle and installation hardware listed
- The stated vehicle fit is limited to 2010-and-newer V8 Camaros.
Skip it if you have a 90mm-throttle-body LS2, LS3, LT1, or LT4 outside the listed Camaro application; Cold Fusion Nitrous CFN-1106 names those engines.
This is aimed at owners of 2010-and-newer V8 Camaros seeking a wet, single-stage plate kit with listed installation hardware. Its fit claim is Camaro-specific, so buyers of other LS vehicles should use a kit naming their application.
Full product details
| Brand | Nitrous Express |
|---|---|
| Color | Standard |
| Compatible with Vehicle Type | Car |
| Included Components | Nitrous Express 20931-10 2010 35-150 HP Plate System with 10 lbs. Bottle for Camaro |
| Item Weight | 20 pounds |
| Manufacturer | Nitrous Express |
| Part Number | 2093110 |
| Manufacturer Warranty Description | Warranty |
| Material | Plastic |
| Model Number | 20931-10 |
Listed on Amazon as: Nitrous Oxide System, LS3 Plate System, Wet, Single Stage, 75-225 HP, 10 lb Bottle, White, GM LS-Series, Kit
View on AmazonAvoid the throttle-body and intake mismatch
The main fitment trap is choosing a plate by engine family alone instead of matching the throttle-body bolt pattern and intake. The listings distinguish a 78mm 3-bolt plate, a 90mm 4-bolt EFI kit, a 90mm plate, and a 102mm plate designed for FAST 102 intakes. Cold Fusion specifies 2005-and-newer LS2 and LS3 engines with a 90mm throttle body, while the LS3 Camaro kit is limited to 2010-and-newer V8 Camaros.
Those descriptions do not establish that any one kit fits every 6.0 LS swap, intake, or vehicle. Before buying, identify the throttle-body diameter and bolt pattern, then confirm the intake and vehicle application against the manufacturer’s fitment information.
A nominally correct diameter alone may not establish that the plate and hardware will fit your particular setup.
Understand what the jetting range does—and does not—tell you
A kit’s listed jetting range identifies available configurations, not a guaranteed safe power increase for every engine. Several Nitrous Express plate kits list jets from 50 to 400 horsepower, while the Cold Fusion kit lists 100, 125, 150, 200, and 250 horsepower options; the LS3 Camaro kit is described as 75–225 horsepower in its title. These figures help compare adjustment ranges, but they do not specify a safe setting for a particular 6.0 LS, fuel system, tune, or engine condition.
Also note that the 78mm 15-pound-bottle listing’s title says 50–350 horsepower, while its feature text lists jetting through 400 horsepower. Treat that discrepancy as something to confirm with the seller or manufacturer rather than assuming the higher figure applies.
Choose only after confirming the correct application and supporting setup.
How to Choose a 6.0 LS Nitrous Plate Kit
Throttle-body and intake fit
Start by matching the plate to your throttle-body diameter, bolt pattern, and intake. The listings include a 78mm 3-bolt plate for car and truck intakes, a 90mm 4-bolt EFI kit, 90mm LS plates, and a 102mm plate specifically for FAST 102 intakes. Cold Fusion identifies 2005-and-newer LS2 and LS3 applications with a 90mm throttle body; the Camaro-specific kit is limited to 2010-and-newer V8 Camaros.
A 3-bolt 78mm setup points toward the Nitrous Express 78mm options, while a confirmed FAST 102 intake favors the 102mm kit. Buyers with a different intake or vehicle should verify exact fitment before selecting by diameter alone.
Jetting range and upgrade path
Look for a jetting range that suits your intended setup, but do not treat its maximum as a safe recommendation for your engine. Multiple Nitrous Express plates list 50–400 horsepower options, while Cold Fusion lists 100, 125, 150, 200, and 250 horsepower. The LS3 Camaro kit title specifies 75–225 horsepower.
For broad listed jetting choices, the 78mm and 90mm Nitrous Express plate kits stand out; for a specified 100–250 range, Cold Fusion is the relevant option. The 90mm and 102mm Nitrous Express plates also have passages machined for a possible dual-stage upgrade using NX933D.
Confirm the exact range and required supporting setup with the manufacturer before choosing a jet.
Bottle inclusion and capacity
Check whether a bottle is included and whether its capacity suits your plans, because the listings vary. The 78mm EFI kit does not state a bottle size in the supplied details; the 78mm plate and 102mm plate listings specify 15-pound bottles, the 90mm plate specifies a 5-pound bottle, and the Camaro kit specifies a 10-pound bottle. Cold Fusion says its complete kit includes the bottle, but the supplied details do not give its capacity.
Buyers who want a stated 15-pound bottle can compare the 78mm and 102mm options, while a smaller stated bottle is available with the 90mm plate. Verify the contents of any listing that omits capacity before ordering.
Which nitrous kit should I choose for my 6.0 LS?
Choose the Nitrous Express 78mm EFI Kit if your intake has a matching 3-bolt throttle body and you want listed jetting from 50 to 400 horsepower. If you want that 78mm fit with a stated 15-pound bottle, consider the Nitrous Express 78mm Plate Kit, but confirm its conflicting 350/400-horsepower listing details. For a verified 90mm setup and a 5-pound bottle, the Nitrous Express 90mm Plate Kit includes 50–400 horsepower jetting and a stated dual-stage upgrade path.
Choose the Nitrous Express 102mm Plate Kit only if you have a FAST 102 intake. Cold Fusion GM Plate Kit suits specified 90mm LS2/LS3 applications, while the Nitrous Express LS3 Camaro Kit is for its stated Camaro application rather than a general 6.0 LS fit.
Related Buying Guides
Frequently Asked Questions
How do I confirm whether my LS intake uses a 3-bolt or 4-bolt throttle-body pattern?
Check the intake or throttle-body manufacturer’s documentation, or compare the actual mounting pattern with the kit’s fitment details before ordering. Do not rely on engine displacement or a 78mm or 90mm size alone to identify the bolt pattern. The listed 78mm and 90mm kits specify different patterns, so verify both.
What supporting fuel, ignition, and engine-management changes are needed for a nitrous setup?
The required changes depend on the engine, kit, jetting, fuel system, and intended use; the supplied listings do not specify a complete supporting-parts package. Confirm fuel delivery capacity, ignition requirements, and any engine-management adjustments with the kit maker or a qualified tuner. Do not assume a plate kit alone provides everything needed.
How should I select a safe nitrous jet size for my engine and intended use?
Use the kit manufacturer’s jetting guidance for your exact engine and setup, and have a qualified tuner verify the choice before use. The listed kits show different horsepower ranges, but those ranges do not establish a safe choice for every 6.0 LS. Account for supporting systems and follow the kit’s installation instructions.
What should I verify when a kit listing gives conflicting horsepower details?
Confirm the exact kit’s current jetting range and included components with the seller or manufacturer before ordering. The 78mm plate kit listing gives 50–350 horsepower, while the editorial verdict flags conflicting 350/400-horsepower details for the 78mm kit with a stated 15-pound bottle. Do not assume the higher figure applies.
How can I tell whether the listed bottle is included with a kit?
Read the complete product title and listing details, then confirm any uncertainty with the seller before ordering. Some titles explicitly state a bottle size, such as 15 pounds or 5 pounds; the leading 78mm EFI kit listing does not specify one. Verify the included components rather than assuming all kits include a bottle.
Final Words
Start by matching the kit’s throttle-body pattern and intake application to your actual hardware. For a compatible 3-bolt intake, the 78mm EFI Kit is the leading choice; consider the 90mm or 102mm options only when their stated fit applies, and confirm conflicting details before ordering. Verify bottle inclusion, jetting, and required supporting changes with the seller or a qualified tuner, since listings do not establish a safe setup for every engine.





