Best Power Tilt And Trim For Small Outboard Engines

#1 · Best Overall

1. T-H Marine PT-35

• Weight: 24 lb

Best for: 35HP Clamp-On Installations.

Why it ranks #1: Rated for motors up to 35HP, it specifies 84 degrees of trim and tilt, a 5.5-inch setback, and clamp-on or bolt-on fit without an adapter.

Accommodation for clamp-on or bolt-on motors without an adapter distinguishes the T-H Marine PT-35 for small-outboard installations. It is rated for 35HP and smaller engines, and its 84 degrees of trim and tilt gives operators a stated range of powered positioning for boat handling.

The 5.5-inch setback is specified to enhance stability and performance, while 84 degrees of trim and tilt gives the PT-35 a defined motor-positioning range. Its compatibility with clamp-on or bolt-on motors without an adapter can simplify the mounting decision for those configurations. Aluminum construction and stainless-steel fasteners provide the stated material combination. Electric-hydraulic operation is described as helping boat handling and reducing back strain, with the key boundary that the unit is rated only for engines up to 35HP.

Skip it if you have an engine above 35HP; Winibo’s TT-ME-115HP is listed for Mercury 75–115HP applications.

This fits buyers with a 35HP-or-smaller outboard, especially clamp-on or bolt-on installations that benefit from no adapter requirement. The stated setback and tilt range are useful selection details, but this PT-35 is not rated for larger motors.

Listed on Amazon as: T-H Marine – 3002.1017 52100 CMC PT-35 Tilt and Trim for up to 35 HP

#2 · Wiring Kit Included

2. Bzcovac PT-35

• Material: Aluminum
• Weight: 19.5 lb
• Material Type: Aluminum

Best for: Small-Motor PT-35 Owners.

Why it ranks #2: This PT-35 is rated up to 35HP, weighs 19.5 pounds, and includes a wiring kit alongside its tilt-and-trim unit.

The PT-35’s 51⁄2-inch setback is its key differentiator, intended to enhance boat stability and let the prop get a better bite at a higher prop setting. Rated for engines up to 35HP, this electric-hydraulic unit also raises the motor with switch activation, reducing the need for manual lifting.

For boats using motors up to 35HP, the 51⁄2-inch setback is intended to support stability and prop bite at a higher setting. Switch-activated lifting lets the operator raise the motor to help protect the prop from shallow water or debris, while avoiding the physical strain of manual tilting. The included wiring kit supports the electrical connection workflow, and the aluminum construction keeps the stated material choice clear. Its PT-35 designation identifies the application to check against the boat’s setup.

Skip it if you run above 35HP; the Winibo QX90 is rated for outboards up to 90HP.

Choose this for a small-outboard setup within the 35HP limit where powered lifting and the stated setback are useful. The PT-35 designation and wiring kit suit a replacement or installation project, but the engine must stay within its rating.

Listed on Amazon as: 3002.1017 52100 for CMC PT-35 Tilt and Trim up to 35 HP – Outboard Motor Electric Hydraulic Power Trim & Tilt Unit

#3 · Highest Capacity

3. Winibo QX90

• Material: Aluminum-Alloy, Stainless Steel
• Weight: 32 lb
• Material Type: Aluminum-Alloy, Stainless Steel

Best for: 90HP Jack-Plate Buyers.

Why it ranks #3: The electric power tilt trim jack plate is listed for outboards up to 90HP and a 330-pound load capacity, with aluminum-alloy and stainless-steel construction.

A 330-pound load capacity is the defining figure for Winibo’s electric power tilt and trim jack plate, which is rated for outboard motors up to 90HP. Its aluminum-alloy and stainless-steel construction gives boat owners a clear material profile when selecting a lift-style unit for their motor and installation.

The 90HP motor rating sets the intended engine range, while the 330-pound load capacity provides a separate limit to consider when evaluating the motor and setup. At 32 pounds and 18.5 by 16.9 by 10.2 inches, the unit has substantial dimensions and weight to account for during installation and storage. Its aluminum-alloy and stainless-steel materials identify the construction, and the included component is a tilt trim jack plate rather than a replacement assembly specified for a particular engine family.

Skip it if you need a listed Mercury-specific replacement assembly; Winibo’s TT-ME-60HP is specified for Mercury F35–F60 four-strokes.

This suits boat owners choosing an electric jack plate for an outboard rated up to 90HP, particularly when the stated load capacity and metal construction matter. Account for its 32-pound weight and listed dimensions when planning installation.

Listed on Amazon as: Power Tilt and Trim Unit for Outboard Motor Up to 90HP (Gray)

#4

4. Winibo 60HP Assembly

• Material: Alloy Steel, Aluminum
• Weight: 11.2 lb
• Material Type: Alloy Steel, Aluminum

Best for: Mercury F35–F60 Replacements.

Why it ranks #4: This replacement assembly lists Mercury F35 through F60 four-stroke compatibility and replacement references including 8M0055011; its stated weight is 11.2 pounds.

Mercury four-stroke compatibility from F35 through F60 gives this Winibo assembly a specific replacement focus, with several listed reference numbers to help identify the intended part family. Its power trim adjusts engine tilt, while the stated goal of reducing turbulence and vibration connects adjustment to stability underway.

The listed Mercury F35, F40, F50, and F60 four-stroke applications define the fit range, while the references 8M0055011, 893517T01, 855654T09, 855654T08, and 855654T4 help narrow replacement identification. Winibo says the assembly enables precise tilt adjustment and minimizes turbulence and vibration to support vessel balance and propeller efficiency. Alloy steel and aluminum are the stated materials; at 11.2 pounds, its weight is also a practical installation consideration. Verify that the engine application and reference match your repair project.

Skip it if you need a jack plate rated to 90HP; the RisWhiteMeteors Outboard Motor Hydraulic Suspension Lift is listed up to that output.

This is a focused option for a Mercury F35–F60 four-stroke replacement where the listed reference numbers match the existing assembly. Its application is narrower than a general jack plate, so confirm the engine and part reference before planning the repair.

Listed on Amazon as: 8M0055011 Outboard Power Tilt & Trim Assembly up to 60HP

#5

5. Minke Marine 8M0055011

Best for: Mercury 30–60HP Repair Projects.

Why it ranks #5: The listed Mercury fitment spans four-stroke 30HP and 35–60HP plus two-stroke 55–60HP applications, with several replacement part references.

Coverage of Mercury four-stroke 30HP and 35–60HP applications, plus two-stroke 55–60HP applications, is the defining feature of this Minke marine replacement unit. Its electrically actuated hydraulic mechanism targets existing-assembly maintenance or replacement, with several listed reference numbers for narrowing the repair match.

The stated fit range spans Mercury four-stroke 30HP and 35–60HP motors, as well as two-stroke 55–60HP applications, giving repair planning a specific engine basis. References 855654T4, 893517T01, 855654T08, 855654T09, and 8M0055011 provide additional identification points. Because this is an electrically actuated hydraulic tilt and trim unit intended to replace an existing assembly, it suits maintenance and repair workflows rather than being described as a jack plate. Check the application and reference against the motor being serviced.

Skip it if you need a jack plate for an outboard up to 90HP; Winibo’s QX90 is listed as an electric power tilt trim jack plate.

This fits Mercury owners handling a tilt-and-trim replacement or maintenance project within the listed engine applications. The engine stroke, horsepower, and reference numbers are important boundaries; use them to identify the relevant existing assembly before proceeding.

Listed on Amazon as: Electric Hydraulic Tilt and Trim Unit for Mercury 30HP-60HP Outboard Motors, Replacement for 855654T4 893517T01 8M0055011 F6001A

#6

6. RisWhiteMeteors 40–60HP

• Material: Metal
• Material Type: Metal

Best for: Mariner Mercury 40–60HP.

Why it ranks #6: This electric hydraulic assembly is listed for Mariner and Mercury 40–60HP outboards and replaces OE references 830150T10, 8M0055006, and 8M0055011.

Compatibility with Mariner and Mercury 40–60HP outboards anchors this electrically hydraulic replacement assembly to a defined engine range. It lists three replacement references—830150T10, 8M0055006, and 8M0055011—and describes smooth lifting and stable operation, making part identification central to its appeal.

The 40–60HP Mariner and Mercury application range gives buyers an engine bracket to check, while the three listed OE references help identify whether this assembly corresponds to an existing unit. Electric operation drives its hydraulic trim and tilt, and the product describes smooth lifting, strong power, and stable operation as the intended benefits. Its marine-grade, corrosion-resistant structure addresses the marine environment, and the package lists one assembly ready for installation. Confirm the reference and engine application for a replacement project.

Skip it if you need a 90HP jack plate rather than a 40–60HP replacement; the RisWhiteMeteors Outboard Motor Hydraulic Suspension Lift is rated up to 90HP.

This suits a Mariner or Mercury owner replacing an assembly on a 40–60HP outboard, especially when one of the listed reference numbers matches. Its application is specific, so use the engine range and reference details to guide the replacement choice.

Listed on Amazon as: 8M0055011 830150T10 8M0055006 Electrically Hydraulic Power Trim &Tilt Compatible with Mariner Mercury Outboard 40-60HP

#7

7. RisWhiteMeteors Gray Jack Plate

• Material: Aluminum
• Material Type: Aluminum

Best for: 90HP Helm-Control Buyers.

Why it ranks #7: The electric jack-plate-style lift is listed for outboards up to 90HP and includes a push-button switch, though the listing gives no specific horsepower floor.

An included push-button switch that can be mounted near the helm or on the tiller handle gives this RisWhiteMeteors lift a practical control-placement option. The electric-hydraulic unit is listed for outboards up to 90HP, and the switch lets the operator raise or lower the motor.

The push-button switch provides the stated raise-and-lower control, while placement near the helm or tiller handle lets the owner choose a convenient operating location. Its compatibility is listed up to 90HP and names Yamaha, Honda, Evinrude, Mercury, Suzuki, OMC, Mariner, Johnson, Tohatsu, Nissan, and MerCruiser. Aluminum construction is specified, and professional installation is recommended for people unfamiliar with hydraulic systems or marine engine rigging. That recommendation matters when planning installation; the supplied facts do not specify a more detailed fit range.

Skip it if you need a Mercury-specific 40–60HP replacement assembly; RisWhiteMeteors’ 8M0055011 unit lists that application and replacement references.

This suits boaters seeking a powered lift rated up to 90HP with a choice of helm or tiller switch placement. Consider the stated installation recommendation if hydraulic systems or marine engine rigging are unfamiliar, and check the motor application.

Listed on Amazon as: Power Tilt and Trim Unit for Outboard Motor up to 90HP, Heavy Duty Aluminum Motor Lift Jack Plate, Electro Hydraulic Marine Actuator, IP68, Gray

#8

8. RisWhiteMeteors Black Jack Plate

Best for: 90HP Push-Button Lift Buyers.

Why it ranks #8: This electric hydraulic jack plate is listed for outboards up to 90HP and includes a push-button switch, but its listing gives fewer construction details.

The included push-button switch, mountable near the helm or on a tiller handle, gives this RisWhiteMeteors electric-hydraulic lift flexible control placement. Its stated compatibility reaches outboards up to 90HP, and the control raises or lowers the motor for operators who want access from either location.

The push-button switch is specified for raising or lowering the motor, with mounting options near the helm or on the tiller handle to suit the operator’s control position. Compatibility is stated up to 90HP, and the product lists Yamaha, Honda, Evinrude, Mercury, Suzuki, OMC, Mariner, Johnson, Tohatsu, Nissan, and MerCruiser. Professional installation is recommended for people unfamiliar with hydraulic systems or marine engine rigging. The supplied details do not identify a more specific engine-by-engine fit range, making the stated horsepower ceiling the primary selection boundary.

Skip it if you need a Mercury F75–F115 assembly with listed replacement references; Winibo’s TT-ME-115HP specifies that engine range.

This suits boat owners seeking an electric-hydraulic lift for an outboard up to 90HP, with control access near the helm or tiller. Check the engine application and consider the installation recommendation if marine rigging is unfamiliar.

Listed on Amazon as: Power Tilt Trim Unit for Outboard Motor up to 90HP, Electric Hydraulic Lift Jack Plate, Marine Transom Actuator for Boats, IP68 Waterproof, Black

#9

9. Winibo 115HP Assembly

• Material: Alloy Steel, Aluminum
• Weight: 11.4 lb
• Material Type: Alloy Steel, Aluminum

Best for: Mercury 75–115HP Replacements.

Why it ranks #9: Its stated Mercury compatibility reaches 75–115HP and includes F75 through F115 models, placing it above the small-outboard focus of this roundup.

Mercury compatibility from F-75 through F-115, including listed 75–115HP two-wire four-stroke applications, sets this Winibo assembly apart from smaller-engine replacements. It also identifies references 8M0090335 and 8M0171818, while its tilt adjustment is described as supporting vessel stability and propeller efficiency.

The listed Mercury F-75, F-80, F-90, F-100, and F-115 models, alongside 75–115HP two-wire four-stroke applications, establish the intended engine range. References 8M0090335 and 8M0171818 help identify a potential replacement match. Winibo says precise tilt adjustment minimizes turbulence and vibration, supporting vessel balance and propeller propulsion efficiency. The assembly uses alloy steel and aluminum and weighs 11.4 pounds, details relevant to installation handling. Check both the engine application and reference before selecting it for a repair.

Skip it if you need a Mercury F35–F60 four-stroke replacement; Winibo’s TT-ME-60HP lists those smaller applications.

This is for Mercury owners replacing tilt and trim on the listed F-75–F-115 or 75–115HP two-wire four-stroke applications. Its engine range and reference numbers are the key fit boundaries; check both against the motor before choosing.

Listed on Amazon as: 8M0090335 8M0171818 Outboard Power Tilt & Trim Assembly up to 115HP