Best Hydraulic Brakes For Bicycles: 10 Options Compared

Best Hydraulic Brakes For Bicycles

A strong bicycle hydraulic brake choice delivers a compatible lever-and-caliper setup, suitable hose lengths, and the components your bike actually needs. This roundup includes complete front-and-rear sets, individual Shimano brakes, e-bike kits with power-off sensors, and a Magura mixed-piston pair. The products differ substantially: hose lengths range from the Shimano front set’s 1000 mm to longer e-bike rear hoses, while some kits include rotors and others do not list them.

Match the brake configuration to your bike before comparing features; a promising set is not useful if its hose routing, rotor interface, or electrical connector does not fit. Below, the ranking prioritizes complete, clearly specified bicycle systems and identifies the best-supported options for e-bikes, mountain bikes, and individual replacements.

Magura MT Trail Sport is the strongest choice for riders seeking a complete front-and-rear bicycle brake set with differentiated piston setups. Its front caliper has four pistons and its rear has two, and the listed set includes ergonomic one-finger aluminum levers. For a simpler complete kit that includes rotors, WEEROCK Hydraulic Brake Set is a practical alternative with 160 mm rotors and left-front/right-rear hoses.

Riders replacing only one brake should consider the Shimano MT201 front or rear set instead.

Our Top Picks

Magura MT Trail SportBest Overall

Magura MT Trail Sport

The listed pair covers front and rear with a four-piston front caliper, two-piston rear, and ergonomic one-finger aluminum levers.

View on Amazon
WEEROCK Hydraulic Brake SetBest Rotor Kit

WEEROCK Hydraulic Brake Set

This complete left-front/right-rear set includes 160 mm rotors, bolts, and aluminum components, with 800 mm and 1550 mm hoses.

View on Amazon
Exceedhub Z00M HB875EBest E-Bike Set

Exceedhub Z00M HB875E

The pre-bled set includes 180 mm rotors, mineral oil, and a 2-pin automatic power-off sensor for compatible e-bikes.

View on Amazon

Compare brake sets by fit, included parts, and use

#ProductWeightCompatible with Vehicle TypeMaterialBuy
10.49 kg—MetalView on Amazon
20.49 kg—AluminumView on Amazon
3—Bicycle, E-city Bike, E-mountain Bike…—View on Amazon
4
Exceedhub 2-Piston E-Bike4. Exceedhub 2-Piston E-BikeE-Bike Power-Off Brake Pair
——AluminumView on Amazon
5
KKWODEN MT200 Set5. KKWODEN MT200 SetMT200 Pair With 180mm Rotors
1 kgBicycle, MTB bike—View on Amazon
6
LuckySlycyc Four-Piston Set6. LuckySlycyc Four-Piston SetFour-Piston Complete Brake Pair
——AluminumView on Amazon
7
Shimano MT201 Front7. Shimano MT201 FrontFront Brake For Shimano MT201
1.2 lbBicycleMultiView on Amazon
8
Shimano MT201 Rear8. Shimano MT201 RearRear Brake With Adjustable Reach
1.3 lbBicycle—View on Amazon
9
Fat-Cattie Hydraulic Set9. Fat-Cattie Hydraulic SetSix-Bolt Rotor Brake Set
2 lbBicycle—View on Amazon
10
Shimano Saint Rear10. Shimano Saint RearSaint Rear Brake With Finned Pads
13.76 ozRV—View on Amazon

Detailed Reviews: Best Hydraulic Brakes For Bicycles

Magura MT Trail Sport

#1 · Best Overall

1. Magura MT Trail Sport

  • Weight: 0.49 kg
  • Material: Metal

Best for: Trail Set With Mixed Pistons.

Why it ranks #1: The listed pair covers front and rear with a four-piston front caliper, two-piston rear, and ergonomic one-finger aluminum levers.

A four-piston front caliper paired with a two-piston rear caliper is the defining setup of the Magura MT Trail Sport, offering a distinct front-to-rear piston arrangement. Its one-finger aluminum HC levers and MagnetiXchange pistons for pad changes give riders specific control and maintenance features to weigh.

The set includes two brakes, with four pistons at the front and two at the rear, so buyers can select a different caliper configuration at each wheel. Magura lists an ergonomic one-finger HC lever made from aluminum, giving the control a specified lever shape and material. The forged front caliper uses MagnetiXchange brake pistons for easy pad changes, which can simplify that maintenance task. Listed cable lengths are 2,000 mm and 1,000 mm; plan routing around the wheel positions.

Pros
  • Four-piston front and two-piston rear configuration
  • One-finger HC aluminum levers
  • MagnetiXchange pistons for easier pad changes
  • Cable lengths listed as 2,000 mm and 1,000 mm
Cons
  • The set uses brand-specific handle compatibility.

Skip it if you need a matched two-piston setup at both wheels; the Shimano MT201 rear set, B07LFD58JH, specifies a two-piston caliper.

This Magura set suits riders seeking a mixed-piston front-and-rear arrangement, one-finger aluminum levers, and easier pad-change access. Its brand-specific handle compatibility and differing cable lengths deserve attention when planning installation.

Full product details
BrandMagura
ColorBlack
Handle CompatibilityBrand Specific
Handle MaterialAluminum
Included ComponentsInstallation Hardware
Item Dimensions L x W4.72"L x 3.54"W
Item Weight0.49 kg
ManufacturerEAGEJ|#Magura
Part Number2701389
Manufacturer Warranty DescriptionLimited Warranty
MaterialMetal
Model Number2701389
Dimensions4.72"L x 3.54"W
StyleMT Trail Sport 1-Finger HC Lever, Left/Right, 2000 mm / 1,000 mm Cable Length, Set of 2 Front Wheel Brakes (4 Pistons) and Rear Wheel (2 Pistons) with Accessories (Package = 1 Set) See more
Style NameMT Trail Sport 1-Finger HC Lever, Left/Right, 2000 mm / 1,000 mm Cable Length, Set of 2 Front Wheel Brakes (4 Pistons) and Rear Wheel (2 Pistons) with Accessories (Package = 1 Set)
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Listed on Amazon as: Magura MT Trail Sport 2701389 Bicycle Brake 1-Finger HC Lever Left/Right Suitable Set Consisting of Two Brakes for Front Wheel 4 and Rear Wheel 2 Pistons, Black, One Size

View on Amazon
WEEROCK Hydraulic Brake Set

#2 · Best Rotor Kit

2. WEEROCK Hydraulic Brake Set

  • Weight: 0.49 kg
  • Material: Aluminum

Best for: Rotor-Inclusive MTB Brake Kit.

Why it ranks #2: This complete left-front/right-rear set includes 160 mm rotors, bolts, and aluminum components, with 800 mm and 1550 mm hoses.

A supplied 160 mm, six-bolt rotor distinguishes this WEEROCK front set, so buyers replacing a compatible front brake can receive the rotor and mounting screws together. It pairs an aluminum two-piston caliper with a left lever and an 800 mm front hose, giving the kit a clearly specified front-end layout.

The set is explicitly the left-front version, with an 800 mm cable, aluminum caliper, lever, screws, and a 160 mm rotor using six bolts. That combination can simplify gathering the stated front-brake components, while the rotor's six-bolt format makes hub compatibility an important installation check. The two-piston hydraulic design uses mineral oil to transmit pressure to the pads. WEEROCK also lists a separate right-rear version, but this package is the front set.

Pros
  • Includes a 160 mm rotor with six-bolt mounting
  • 800 mm front hose and left lever
  • Aluminum two-piston caliper
  • Mineral-oil hydraulic system
Cons
  • This listing is the left-front set, not a complete front-and-rear pair.

Skip it if you need a complete front-and-rear pair; the LuckySlycyc four-piston kit, B0GJL71QXZ, lists both brake levers and calipers.

This is a practical candidate for a front-brake replacement when a six-bolt 160 mm rotor is wanted in the kit. It is specifically left-front, so verify the bike's rotor interface and source a rear brake separately.

Full product details
BrandWEEROCK
Color‎Left Front
Item Package Dimensions L x W x H‎8.9 x 8.74 x 2.64 inches
Item Weight‎0.49 kg
Manufacturer‎WEEROCK
Material‎Aluminum
Package Weight‎0.49 kg
Size‎800MM

Listed on Amazon as: WEEROCK Hydraulic Brake Set Bike Disc Brakes Kit with Left Front 800mm Right Rear 1550 mm 160mm Rotors Aluminum Alloy Hydraulic Brake Fit for Mountain Bike, MTB

View on Amazon
Exceedhub Z00M HB875E

#3 · Best E-Bike Set

3. Exceedhub Z00M HB875E

  • Compatible with Vehicle Type: Bicycle, E-city Bike, E-mountain Bike…

Best for: E-Bike Sensor And Rotor Kit.

Why it ranks #3: The pre-bled set includes 180 mm rotors, mineral oil, and a 2-pin automatic power-off sensor for compatible e-bikes.

A brake automatic power-off sensor with two-pin connectors makes this Exceedhub HB875E set a focused option for compatible electric bicycles. It also includes 180 mm rotors and arrives pre-bled with mineral oil, while the 950 mm front and 1,850 mm rear hoses help buyers assess routing.

The left-front and right-rear set pairs its power-off sensor and two-pin connectors with dual-piston calipers, a combination relevant to an e-bike with a matching electrical interface. The included 180 mm rotors and pre-bled mineral-oil system provide specified parts and fluid preparation for installation. Hose lengths are 950 mm at the front and 1,850 mm at the rear, so check them against frame size and cable routing. The listing says it is compatible only with models equipped with left-side brakes.

Pros
  • Automatic power-off sensor with two-pin connectors
  • Includes two 180 mm rotors
  • Pre-bled with mineral oil
  • 950 mm front and 1,850 mm rear hoses
Cons
  • Compatible only with models equipped with left-side brakes.

Skip it if your e-bike lacks the listed left-side brake setup or two-pin connection; the Exceedhub 2-Piston Brake, B0FN6P8BVQ, also specifies a two-pin connection, so check its configuration.

Choose this for an e-bike with the listed left-side brake arrangement and matching power-off connection, especially if 180 mm rotors suit the setup. Verify connector and hose routing compatibility before installation.

Full product details
BrandExceedhub
Compatible with Vehicle TypeBicycle, E-city Bike, E-mountain Bike, Electric Bicycle, Scooter
Included Components1*Ebike Brakes, 2*Rotors
ManufacturerExceedhub
Part NumberZ00M-001
Manufacturer Warranty Description1
Model NumberZ00M-HB875E
Model Year2025

Listed on Amazon as: Z00M HB875E Ebike Hydraulic Disc Brake Set, Electric Power-Off Hydraulic Brake Set with 180mm Rotors, Pre-Bled with Mineral Oil Brakes Kit for eBike, Mountain Bike, Road Bike

View on Amazon
Exceedhub 2-Piston E-Bike

#4

4. Exceedhub 2-Piston E-Bike

  • Material: Aluminum

Best for: E-Bike Power-Off Brake Pair.

Why it ranks #4: Its assembled, pre-bled front and rear brakes have 950 mm and 1880 mm hoses and a 2-pin power-off feature.

A two-pin electric power-off feature makes this Exceedhub set particularly relevant to e-bike installations that use that connection. It arrives pre-bled with mineral oil, and its 950 mm front and 1,880 mm rear hoses provide specific routing lengths for evaluating a bicycle before fitting the pair.

The front assembly has a left 950 mm hose and the rear assembly a right 1,880 mm hose, with the listing identifying a split internal-routing system at the rear. Those lengths and routing details help buyers assess frame passages before installation. The pre-bled mineral-oil system removes the need to perform the initial bleed described by the product, while the two-piston design and spiral lever adjustment provide the specified braking layout and lever adjustment. It is listed for e-bikes, MTBs, and scooters.

Pros
  • Two-pin electric power-off connection
  • Pre-bled with mineral oil
  • 950 mm front and 1,880 mm rear hoses
  • Two-piston brakes with spiral lever adjustment
Cons
  • The listed two-pin power-off connection requires a compatible e-bike connection.

Skip it if you do not need an electric power-off connection; the Magura MT Trail Sport, B0725RV8BF, is a non-electric-specific brake set.

This pair suits e-bike owners whose system uses the listed two-pin power-off connection and whose routing matches the long rear hose. Check both hose paths and the electrical connector before choosing it.

Full product details
BrandExceedhub
Color‎Black
Included Components‎1 Pair Brakes
Item Package Dimensions L x W x H‎10 x 8.31 x 2.83 inches
Manufacturer‎Exceedhub
Material‎Aluminum
Model‎2-Pistons Brake
Package Weight‎0.91 kg
Size‎Front 950mm Right Rear 1880mm
Warranty Description‎1

Listed on Amazon as: E-Bike Hydraulic Disc Brake Set, 2-PIN 2-Pistons Electric Power-Off Hydraulic Brakes Set, Left Front 950mm Right Rear 1880mm Pre-Bled with Mineral Oil Brakes Kit for eBike, MTB, Scooters

View on Amazon
KKWODEN MT200 Set

#5

5. KKWODEN MT200 Set

  • Weight: 1 kg
  • Compatible with Vehicle Type: Bicycle, MTB bike

Best for: MT200 Pair With 180mm Rotors.

Why it ranks #5: The front-and-rear MT200 set specifies 800 mm and 1550 mm hoses and includes RT26 180 mm rotors; adapters are not included.

Included RT26 180 mm rotors set this KKWODEN MT200 package apart for riders seeking a brake set with rotors specified in the title. The front 800 mm and rear 1,550 mm hose lengths define its routing envelope, while the listing identifies compatibility across several bicycle styles, subject to hose reach.

The kit lists an MT200 front-and-rear brake set and RT26 180 mm rotors, letting buyers consider the brake and rotor combination together. Its 800 mm front and 1,550 mm rear hoses are useful measurements to compare with the bike's routing before fitting. KKWODEN names mountain bikes, e-bikes, fat bikes, folding bikes, and scooters as compatible vehicle types, but notes that hose length still matters. Adapters are not included, so account for that during installation planning.

Pros
  • Includes RT26 180 mm rotors
  • MT200 front-and-rear hydraulic brake set
  • Front hose is 800 mm; rear is 1,550 mm
  • Listed for mountain, electric, fat, and folding bikes and scooters
Cons
  • Adapters are not included.

Skip it if you need adapters supplied with the brake kit; the LuckySlycyc four-piston set, B0GJL71QXZ, lists fixing bolts in its included components.

A useful option for a rider seeking an MT200 pair with 180 mm RT26 rotors across the listed bicycle types. Check hose reach and plan for adapters separately, since they are not included.

Full product details
BrandKKWODEN
Compatible with Vehicle TypeBicycle, MTB bike
Included Components1*brake
Item Weight1 kg
ManufacturerKKWODEN
Part NumberMT200
Manufacturer Warranty Description1
Model NumberMT200

Listed on Amazon as: MT200 MTB Hydraulic Disc Brakes Set with RT26 180mm Rotors

View on Amazon
LuckySlycyc Four-Piston Set

#6

6. LuckySlycyc Four-Piston Set

  • Material: Aluminum

Best for: Four-Piston Complete Brake Pair.

Why it ranks #6: This complete kit lists four-piston brakes, ceramic pads, and 80 cm front and 150 cm rear hoses, but gives less fit detail.

Four-piston calipers and ceramic pads are the defining combination in this LuckySlycyc complete hydraulic set, aimed at riders seeking the listed high-temperature-resistant pad material alongside a full pair of brakes. Its 80 cm left-front and 150 cm right-rear hoses make routing measurements central to the purchase.

The kit lists two aluminum levers, two calipers, and fixing bolts, with the levers pre-installed, which can reduce the number of separate parts to assemble. Ceramic pads are described as resisting high temperatures and being less to squeal or damage rotors than standard pads. The left-front hose is 80 cm and right-rear hose 150 cm, so measure each route before installation; the listing identifies the set for mountain, e-bike, and road bikes.

Pros
  • Four-piston hydraulic brake set
  • Ceramic pads described as heat resistant
  • Complete kit lists two levers, calipers, and fixing bolts
  • Front and rear hose lengths are specified
Cons
  • The 80 cm front hose may not suit bikes requiring a longer front route.

Skip it if you need a front hose longer than 80 cm; the Exceedhub 2-Piston Brake, B0FN6P8BVQ, lists a 950 mm front hose.

Consider this pair for a mountain, e-bike, or road-bike build where four-piston calipers and ceramic pads suit the intended setup. Its 80 cm front and 150 cm rear hoses remain the key routing boundaries.

Full product details
BrandLuckySlycyc
Color‎Black
Included Components‎2 x aluminum bicycle brake handle lever, 2 x oil pressue cylinder driven caliper, 4 x fixing bolts
Item Package Dimensions L x W x H‎10.04 x 8.03 x 2.91 inches
Manufacturer‎LuckySlycyc
Material‎Aluminum
Model‎7324 MTB Disc Brakes
Package Weight‎0.8 kg
Size‎Large
Warranty Description‎180 Day

Listed on Amazon as: Hydraulic Brakes, MTB Disc Brakes – Complete Bicycle 4 Piston Hydraulic Brakes for Mountain Bike, E-Bike, Road Bike,Left (Front) Hose is 80cm, and the Right (Rear) Hose is 150cm

View on Amazon
Shimano MT201 Front

#7

7. Shimano MT201 Front

  • Weight: 1.2 lb
  • Compatible with Vehicle Type: Bicycle
  • Material: Multi

Best for: Front Brake For Shimano MT201.

Why it ranks #7: A clearly identified front replacement with a two-piston BR-MT200 caliper, adjustable-reach lever, and 1000 mm hose.

A 1,000 mm front hose defines this Shimano MT201 front set, helping buyers assess routing length before installing a left-side front brake. The BR-MT200 caliper is a two-piston design with resin pads, and its BL-MT201 lever has three-finger operation and adjustable reach for a more tailored hand position.

This package is the front hydraulic brake, with a left-side lever, rather than a complete front-and-rear pair. Its listed 1,000 mm hose gives a concrete routing measurement to check against the bicycle. Shimano pairs the hose with a two-piston BR-MT200 caliper and resin pads, while the BL-MT201 lever's three-finger shape and adjustable reach support hand placement adjustments. Olive and connector insert are specified; the set is listed without an adapter.

Pros
  • Front hydraulic brake set includes disc brake and lever
  • Specified 1,000 mm hose
  • Two-piston BR-MT200 caliper with resin pads
  • Three-finger left lever offers adjustable reach
Cons
  • Front-only set does not supply a rear brake.

Skip it if you need a rear brake rather than a front-only set; the Shimano MT201 rear set, B07LFD58JH, provides the rear position.

Choose this for a front-brake replacement that suits a left-side lever and benefits from adjustable reach. Check the 1,000 mm hose against your routing, and account for the rear brake separately.

Full product details
BrandSHIMANO
Compatible with Vehicle TypeBicycle
Included ComponentsDisc Brake & Lever
Item Weight1.2 pounds
ManufacturerShimano
Part NumberEMT201KLFPRA100
Manufacturer Warranty DescriptionLimited Warranty
MaterialMulti
Model NumberEMT201KLFPRA100

Listed on Amazon as: SHI MT201 DISC BRAKE SET FRONT 1000mm BLACK

View on Amazon
Shimano MT201 Rear

#8

8. Shimano MT201 Rear

  • Weight: 1.3 lb
  • Compatible with Vehicle Type: Bicycle

Best for: Rear Brake With Adjustable Reach.

Why it ranks #8: This rear-specific Shimano set has a two-piston caliper, resin pads, adjustable-reach lever, and a 1700 mm hose.

A 1,700 mm rear hose is the defining feature of this Shimano MT201 set, giving rear-brake buyers a specified hose length to consider against their frame routing. Its BR-MT200 two-piston caliper uses resin pads, while the BL-MT201 right-side lever has adjustable reach, a practical detail for riders who need lever reach tailored to smaller hands.

This is a rear-only set with a right-side BL-MT201 lever, so it supplies the rear brake rather than a matched front-and-rear pair. The 1,700 mm hose is the key routing measurement to compare with the bike before installation. Shimano specifies a two-piston BR-MT200 caliper and resin pads, and the included lever's adjustable reach lets the rider set its position for hand comfort. Olive and connector insert are listed; an adapter is not included.

Pros
  • Rear hydraulic brake set includes disc brake and lever
  • Specified 1,700 mm hose
  • Two-piston BR-MT200 caliper with resin pads
  • BL-MT201 right lever has adjustable reach
Cons
  • Rear-only set does not supply a front brake.

Skip it if you need both front and rear brakes in one purchase; the Shimano MT201 front set, B07LFC434L, is the matching front-only option.

For a rider replacing or assembling a rear brake who values adjustable lever reach, this Shimano set brings a defined 1,700 mm hose and resin-pad caliper. It is rear-only, so plan separately for the front brake.

Full product details
BrandSHIMANO
Compatible with Vehicle TypeBicycle
Included ComponentsDisc Brake & Lever
Item Weight1.3 pounds
ManufacturerShimano
Part NumberEMT201KRRXRA170
Manufacturer Warranty DescriptionLimited Warranty
Model NumberEMT201KRRXRA170
Model Year2000
Additional InformationImportant information

Listed on Amazon as: SHIMANO MT201 DISC BRAKE SET REAR 1700mm BLACK

View on Amazon
Fat-Cattie Hydraulic Set

#9

9. Fat-Cattie Hydraulic Set

  • Weight: 2 lb
  • Compatible with Vehicle Type: Bicycle

Best for: Six-Bolt Rotor Brake Set.

Why it ranks #9: A complete left-front/right-rear set lists 85 cm and 150 cm tubes and 160 mm rotors, with fit limited to 6-bolt hubs.

A supplied 160 mm rotor and six-bolt hub compatibility define this Fat-Cattie hydraulic brake set, giving buyers a concrete rotor interface to check for their bicycle. Its left-front and right-rear layout comes with 85 cm and 150 cm tubes, respectively, for assessing hose routing before installation.

The set is described as a pair, with a left-front lever and right-rear lever arrangement and steel fasteners. The included 160 mm rotors are specified for six-bolt compatible hubs, making hub fit a key pre-installation check. Hose lengths are 85 cm front and 150 cm rear, which help riders compare the lines with their frame routes. The listing also explains that two screws can adjust the brake to eliminate disc scratching, a useful setup step after mounting.

Pros
  • Includes 160 mm rotors
  • Rotors specified for six-bolt compatible hubs
  • 85 cm front and 150 cm rear tubes
  • Steel fasteners included
Cons
  • The 160 mm rotors require six-bolt compatible hubs.

Skip it if you have a center-lock hub rather than a six-bolt hub; the Magura MT Trail Sport, B0725RV8BF, lists no six-bolt rotor requirement.

This pair suits riders whose hubs accept six-bolt rotors and whose routes match the listed hose lengths. Its 160 mm rotor format is the main compatibility boundary to resolve before purchase and setup.

Full product details
BrandFat-Cattie
Compatible with Vehicle TypeBicycle
Included Components1 Pair MBT Bike Hydraulic Disc Brake Set
Item Weight2 pounds
ManufacturerFat-Cat
Part NumberBike Hydraulic Disc Brake Set
Manufacturer Warranty Description1 months
Model NumberBike Disc Brake Kit

Listed on Amazon as: Bicycle Hydraulic Disc Brake Set with 160mm Bike Rotors,Red

View on Amazon
Shimano Saint Rear

#10

10. Shimano Saint Rear

  • Weight: 13.76 oz
  • Compatible with Vehicle Type: RV

Best for: Saint Rear Brake With Finned Pads.

Why it ranks #10: This is a rear-only brake rather than a complete bicycle set; its four-piston caliper and tool-free reach adjustment suit a specific replacement.

A four-piston dual-diameter caliper with finned metal pads defines this Shimano Saint rear brake, aimed at riders choosing a specified rear hydraulic unit and pad type. The lever adds tool-free reach adjustment and free-stroke adjustment, allowing setup changes without a tool for reach.

This is a rear brake and lever, not a front-and-rear set. Its post-mount caliper has four dual-diameter pistons, while the finned metal pads are specified in the product title. The hydraulic Servo-Wave actuation is listed alongside I-Spec B lever compatibility, useful details when checking a handlebar control setup. Tool-free reach and free-stroke adjustment support adjustments at the lever. Confirm the post-mount and I-Spec B interfaces fit the intended bicycle components.

Pros
  • Four-piston, dual-diameter caliper
  • Finned metal pads
  • Tool-free reach and free-stroke adjustment
  • I-Spec B compatible lever
Cons
  • Rear-only brake does not provide a front brake.

Skip it if you need a complete front-and-rear set; the Magura MT Trail Sport, B0725RV8BF, is listed as a pair of brakes for both wheels.

This Shimano Saint unit suits a rider replacing a rear brake who wants four pistons, finned metal pads, and tool-free lever adjustment. Check post-mount and I-Spec B compatibility, and source a front brake separately.

Full product details
BrandSHIMANO
Compatible with Vehicle TypeRV
Included ComponentsDisc Brake & Lever
Item Weight13.76 ounces
ManufacturerShimano
Part NumberIM820BJRRXNA170
Manufacturer Warranty DescriptionLimited Warranty
Model NumberShimano
Model Year2000
Additional InformationImportant information

Listed on Amazon as: Shimano Saint BL-M820-B/BR-M820 Disc Brake and Lever – Rear, Hydraulic, Post Mount, Finned Metal Pads, Black

View on Amazon

Avoid hose-routing and connector mismatches

Hose reach and e-bike connector type can make an otherwise suitable brake set unusable, so check both before ordering. The listed complete sets show substantial differences: WEEROCK uses 800 mm front and 1550 mm rear hoses, while Exceedhub’s Z00M HB875E lists 950 mm front and 1850 mm rear. Another Exceedhub e-bike set specifies a 1880 mm rear hose.

Measure the route along the frame, including bends and any internal passages, rather than comparing straight-line frame dimensions. For e-bikes, confirm the bike’s existing brake sensor connection against the product’s stated 2-pin connector; the Z00M HB875E is specifically listed with a 2-pin automatic power-off sensor.

The product data does not establish compatibility with every e-bike or routing arrangement. If the hose is too short, installation may fail; excess length also needs a safe, appropriate routing solution.

Rotor inclusion does not guarantee rotor compatibility

A kit’s included rotor size is only one part of rotor compatibility; check the bike’s mounting interface and the brake’s fit requirements too. WEEROCK lists a 160 mm rotor with six bolts, Fat-Cattie lists 160 mm rotors and specifies 6-bolt compatible hubs, and the KKWODEN set names RT26 180 mm rotors. Exceedhub Z00M HB875E also includes 180 mm rotors.

By contrast, the Shimano MT201 sets state that they are supplied without an adapter, and their listings do not identify an included rotor. These differences matter when replacing a complete system versus reusing existing parts.

Do not assume a rotor from one listing will mount to a different hub or suit the bike’s existing caliper position. Confirm the rotor attachment and required adapter for the bicycle before treating the included parts as a complete fit.

How to Choose Bicycle Hydraulic Brakes

Front and rear hose lengths

Look for hose lengths that can follow your bike’s actual routing with adequate reach. Listed front lengths range from 800 mm for WEEROCK and KKWODEN to 1000 mm for the Shimano MT201 front brake; rear lengths include 1500 mm for LuckySlycyc, 1550 mm for WEEROCK and KKWODEN, 1700 mm for Shimano MT201 rear, and up to 1880 mm for Exceedhub’s 2-Piston E-Bike set. These values are not interchangeable guarantees because frame size and routing affect the required length.

A compact frame or external routing may suit a shorter hose, while a larger frame or internal routing may need more reach. Measure the intended route before choosing, especially for the longer e-bike rear lines.

Piston configuration and intended use

Choose a piston setup that matches the brake role and the product’s stated application. The Magura MT Trail Sport combines a four-piston front caliper with a two-piston rear, while Shimano MT201 sets use two-piston calipers. LuckySlycyc lists four-piston brakes, and the e-bike sets from Exceedhub specify two pistons.

Those configurations distinguish the products, but the supplied data does not provide comparable stopping-distance or performance tests. A rider seeking a mixed front-and-rear setup can consider Magura; someone replacing a Shimano MT201 brake can stay with the matching two-piston format.

For an e-bike, prioritize the complete system and any required electrical sensor connection rather than assuming piston count alone determines suitability.

Included rotors and fit details

Check whether the set includes rotors and whether their size and mounting style match the bike. WEEROCK includes 160 mm, six-bolt rotors; Fat-Cattie lists 160 mm rotors and calls for 6-bolt compatible hubs; KKWODEN specifies RT26 180 mm rotors; and Exceedhub Z00M HB875E includes 180 mm rotors. The Shimano MT201 descriptions say no adapter is included, and the individual Shimano listings do not specify a rotor in the included components.

A buyer replacing brakes while keeping compatible existing rotors may prefer a brake-only option, while someone assembling a system from scratch may value a kit that lists rotors. Verify rotor attachment, diameter, and adapter needs against the bicycle rather than relying on inclusion alone.

Which Hydraulic Brakes Fit My Bicycle?

For a complete front-and-rear set with a distinctive mixed-piston arrangement, choose Magura MT Trail Sport: it lists four pistons up front and two at the rear. If rotors are needed, WEEROCK Hydraulic Brake Set includes 160 mm six-bolt rotors and specifies both hose lengths. E-bike owners should compare the Exceedhub Z00M HB875E and Exceedhub 2-Piston E-Bike against their sensor connector and hose routing; the former lists a 2-pin power-off sensor and 180 mm rotors.

KKWODEN MT200 Set is another full set with RT26 180 mm rotors, while LuckySlycyc Four-Piston Set specifies ceramic pads. For a single-brake replacement, use Shimano MT201 Front or Shimano MT201 Rear according to the wheel.

Confirm routing, rotor fit, and connector compatibility before buying.

Frequently Asked Questions

How can I tell whether a brake set’s hose length will fit my frame and routing?

Measure the route from each lever to its caliper along the frame, allowing for turns, suspension movement, and handlebar rotation. Compare those measurements with the listed front and rear hose lengths, and confirm which side each length serves. The listings specify different lengths, so check your frame’s routing before choosing a set.

Do I need to replace or match my existing rotors when changing hydraulic brakes?

Check whether the set includes rotors and whether their mounting and size suit your bike and existing setup. The listings identify some sets with 160 mm rotors and others with 180 mm rotors, but they do not establish compatibility with every bicycle. Confirm rotor fit before ordering; if unsure, consult your bike or brake documentation.

How do I check whether an e-bike brake power-off connector is compatible with my bike?

Compare the brake’s listed connector with the connector and wiring on your e-bike, and verify compatibility with the bike’s control system. One listing specifies a 2-pin power-off sensor; the other e-bike set’s title does not specify its connector. Do not assume either will fit without checking your bike’s documentation or confirming with the manufacturer.

What should I check when replacing only one brake?

Choose the front or rear set to match the wheel and brake you are replacing. The Shimano MT201 listings identify separate front and rear options, while their titles also specify hose lengths. Check the hose route and existing rotor fit before ordering, and confirm that the selected set is intended for the correct position.

What does a mixed-piston brake setup mean for choosing a complete set?

A mixed-piston setup uses different piston counts at the front and rear. The Magura MT Trail Sport listing specifies four pistons at the front and two at the rear, and the editorial verdict identifies it as the strongest complete-set choice for riders seeking that arrangement. Confirm that its fit and routing suit your bicycle.

Final Words

For a complete set with a differentiated front-and-rear piston setup, the Magura MT Trail Sport is the clear choice in this roundup. If you need rotors included, consider WEEROCK and verify that its 160 mm rotors and hose lengths suit your bike. For a single-brake replacement, select the Shimano MT201 front or rear set to match the wheel.

E-bike owners should confirm connector compatibility, hose routing, and rotor fit before buying.

Leave a Reply

Your email address will not be published. Required fields are marked *