Best Tires For Log Splitter: Complete Wheels and Tire Replacements

#1 · Best Overall

1. Tkaimy Bearing Wheel

• Size: 4.80×8
• Rim Size: 8 in
• Weight: 3 oz

Best for: Ready-to-mount spindle replacement.

Why it ranks #1: This complete 4.80×8 assembly includes tapered bearings for 1-inch spindles, a hub cap, and a stated 390-pound capacity per wheel.

Included tapered roller bearings for 1-inch spindles make this Tkaimy wheel-and-tire combo a practical replacement when a splitter needs a complete rolling assembly. Its 4.80×8 wheel, 16-inch tire, and included hub cap bring several installation components together, while the 390-pound-per-wheel rating gives buyers a defined load figure to check against their equipment.

The 1-inch-spindle bearings and included hub cap let buyers replace more than the tire alone, and the listed 4-3/8-inch hub spacing helps assess whether the assembly matches the existing setup. A 4-ply, DOT-approved tire and 390-pound-per-wheel capacity provide concrete specifications for evaluating service requirements. The 4.80×8 wheel-and-tire size is commonly used on log splitters, generators, wagons, carts, and trailers, making this useful beyond a single machine type.

Skip it if you need a pair of assembled wheels; RecStuff’s ABIN8105x2 listing is explicitly a two-pack.

Choose this for a splitter or utility machine needing one 4.80×8 assembly with 1-inch-spindle bearings. Check the stated hub spacing and per-wheel load against your existing setup before replacing a wheel.

Listed on Amazon as: 1" Bearing Log Splitter Wheel with Tire 4.8" wide X 8" diameter.

#2 · Best Complete Pair

2. RecStuff Black Wheel

• Size: 4.80X8
• Rim Size: 8 in
• Weight: 22 lb

Best for: Two-wheel assembled replacement set.

Why it ranks #2: This log splitter-specific two-pack arrives fully assembled with 1-inch bearings, dust caps, grease seals, zerk fittings, and grease.

A fully assembled two-pack with dust caps, grease seals, Zerk fittings, and grease brings key service components together for a log-splitter wheel replacement. RecStuff specifies 4.80×8 tires on black integral steel wheels with 1-inch bearings, plus a fit requirement for 1-inch-diameter shafts measuring 4-1/8 inches long.

Because the wheels arrive fully assembled with dust caps, grease seals, Zerk fittings, and grease, buyers get a bundled replacement rather than sourcing those listed components separately. The 1-inch bearings and specified 1-inch-diameter, 4-1/8-inch shaft fit give a concrete compatibility target for the splitter axle. The two-pack supplies a matching pair of black integral steel wheels in 4.80×8 size, useful when replacing both sides together.

Skip it if you want a silver wheel finish; RecStuff’s ABIN8101x2 is the silver-wheel two-pack.

This RecStuff set suits buyers replacing both splitter wheels who want grease fittings and seals included with assembled wheels. Its stated shaft dimensions are specific, so it fits best when the axle matches those measurements.

Listed on Amazon as: Log Splitter Wheel 4.80X8 Tire on Black Integral Wheel with 1 Inch Bearings – 2 Pack

#3

3. RecStuff Silver Wheel

• Size: 4.80×8
• Rim Size: 8 in
• Weight: 22 lb

Best for: Silver assembled wheel pair.

Why it ranks #3: The 4.80×8 wheel-and-tire assemblies come as a two-pack with 1-inch bearings, dust caps, grease seals, zerk fittings, and grease.

A two-pack of fully assembled 4.80×8 wheels gives this RecStuff option a direct role in paired log-splitter replacements. Each listing identifies a silver integral wheel with 1-inch bearings and includes dust caps, grease seals, Zerk fittings, and grease, bundling several service items with the assemblies.

The fully assembled format and included dust caps, grease seals, Zerk fittings, and grease bring listed wheel-service components together, which can simplify replacing both sides as a pair. The 4.80×8 size and 1-inch bearings provide the main specifications to compare with the splitter’s existing wheels and axle. RecStuff lists the integral wheels in silver, a useful identifying detail when choosing between its differently finished assemblies.

Skip it if you require a stated shaft length; RecStuff’s ABIN8105x2 listing specifies a 4-1/8-inch shaft fit.

This pair suits owners replacing both wheels who want assembled 4.80×8 units with bearing-service items included. Compare the 1-inch bearing specification with your axle, particularly if shaft length is a deciding fit detail.

Listed on Amazon as: Log Splitter Wheel 4.80X8 Tire on Silver Integral Wheel with 1 Inch Bearings – 2 Pack

#4 · LRC Wheel Assembly

4. RecStuff LRC Wheel

• Size: 4.80×8
• Rim Size: 8 in
• Weight: 22 lb

Best for: Black LRC assembled wheel pair.

Why it ranks #4: This two-pack combines 4.80×8 LRC tires with integral wheels and 1-inch bearings; the listed shaft length is 4-1/8 inches.

A stated 4-1/8-inch shaft length distinguishes this RecStuff two-pack for buyers comparing axle fit on a log-splitter replacement. The set contains two LRC 4.80×8 tires on black integral wheels with 1-inch bearings, combining the listed wheel size, bearing size, and shaft dimension in one assembly choice.

The 4-1/8-inch shaft length gives buyers a specific measurement to compare with their splitter axle, while the 1-inch bearings identify the bearing size for the setup. Two LRC 4.80×8 tires arrive on black integral wheels, so the set supports replacing a matching pair rather than sourcing tire and wheel components separately. The alloy-steel material specification adds another concrete detail for comparing this assembly with alternatives.

Skip it if you need included grease and Zerk fittings; RecStuff’s ABIN8101x2 listing names those service components.

Choose this RecStuff pair when replacing two black 4.80×8 assemblies and the 4-1/8-inch shaft length matches your splitter. Its listed 1-inch bearings and shaft dimension make axle compatibility the key boundary.

Listed on Amazon as: Log Splitter Wheel 4.80X8 Tire LRC on Black Integral Wheel with 1 Inch Bearings – 2 Pack

#5

5. MZREXN Bearing Wheel

Best for: Integral-wheel two-pack replacement.

Why it ranks #5: Its title identifies a two-pack of 4.80-8 log splitter wheels with 1-inch bearings, though the supplied specifications give few further fit details.

Two 4.80-8 tires on integral wheels make the MZREXN set a paired replacement option for a splitter that needs complete wheel assemblies. The title specifies 1-inch bearings and a zigzag-design model designation, while the supplied specifications identify the pair and white color for buyers comparing replacement parts.

The two-pack can support replacing a matching pair of splitter wheels in one purchase, and the integral-wheel construction means the tire and wheel are presented as one assembly. The 4.80-8 size and 1-inch bearing specification are the key listed details for comparing the set with an existing setup. MZREXN identifies the wheels as white, and its model designation includes “Zigzag,” useful details when distinguishing this assembly from other replacement options.

Skip it if you need a stated shaft length or load capacity; RecStuff’s ABIN8105x2 listing specifies a 4-1/8-inch shaft length.

This MZREXN pair is for buyers replacing two complete 4.80-8 assemblies with 1-inch bearings. Compare those listed dimensions with the splitter’s current wheels, especially if your selection depends on a specified shaft length or load rating.

Listed on Amazon as: MZREXN 1" Bearing Log Splitter Wheel 4.80-8" Tire on Integral Wheel, 2 Pack

#6 · Flat-Free Option

6. Ogracwheel Flat-Free Tire

• Size: 4.80/4.00-8
• Rim Size: 8 in

Best for: Puncture-free solid wheel replacement.

Why it ranks #6: This 4.80×8 solid-rubber assembly has a 1-inch bearing and a stated 300-pound capacity, avoiding punctures and air loss.

Solid rubber construction makes this Ogracwheel assembly puncture-proof and leak-proof, removing inflation-related upkeep from a log-splitter wheel replacement. It combines a 4.80/4.00-8 tire with a 1-inch ball bearing and a 3-inch center hub, while the listed 300-pound capacity gives buyers a specific load figure to assess.

The solid rubber tire is described as puncture-proof, leak-proof, and UV-resistant, which supports use where tires may sit exposed without relying on air pressure. Its 1-inch ball bearing and 3-inch center hub provide concrete axle and hub dimensions for checking a replacement fit. The assembly is listed at 300 pounds capacity and is presented for log splitters, wheelbarrows, and garden utility carts, so buyers can compare both load and application.

Skip it if you need pneumatic cushioning; HALBERD’s P819 4.80-8 tubeless tire pair is a tire-focused alternative.

Choose this Ogracwheel assembly when avoiding punctures and air-pressure maintenance matters more than using a pneumatic tire. Check the 1-inch bearing, 3-inch hub, and 300-pound capacity against the splitter’s axle and load needs.

Listed on Amazon as: Flat Free Log Splitter Tires 4.80×8 with 1" Bearing Axle, 3" Center Hub for Wheel Barrow Garden Utility Cart, Universal Replacement

#7

7. Ogracwheel Solid Tire

• Size: 4.80-8
• Rim Size: 8 in
• Weight: 7 lb

Best for: Flat-free splitter and yard-cart wheel.

Why it ranks #7: The 16-inch solid-foam wheel is listed for log splitters and has a 1-inch bearing, but its 3-inch hub length needs checking.

A solid foamed tire that will not puncture or leak makes this Ogracwheel replacement useful for splitter owners seeking to avoid flat-tire interruptions. The 16-inch wheelbarrow-style tire includes a 1-inch ball bearing and a 3-inch axle shaft, with the 4.80-8 size also listed for log-splitter use.

The solid foamed construction is described as puncture-proof and leak-proof, and its stated UV resistance supports leaving the tire exposed to sun without that exposure affecting it. A 1-inch ball bearing and 3-inch hub length give buyers dimensions to compare with the existing axle. The 4.80-8, 16-inch wheel is listed for log splitters, wheelbarrows, garden carts, and wagons, extending its potential use across yard equipment.

Skip it if you want a pneumatic tire pair; HALBERD’s P811 listing is a tubeless set of two 4.80-8 tires.

This wheel suits a splitter or yard-cart owner prioritizing flat-free operation and a solid tire. Match the 1-inch bearing and 3-inch hub length to the axle, since those dimensions define an important fit boundary.

Listed on Amazon as: Wheelbarrow Tire 4.80 4.00-8 with 1 inch Axle, 3.0-6.0" Hub Flat Free 16 inch Solid Foamed Tire Replacement Wheelbarrow Wheel 4.80-8 for Log Splitter Wheel Barrel Yard Cart Garden Wagons

#8 · Highest Capacity

8. HALBERD P811 Tire

• Size: 4.80-8
• Rim Size: 8 in

Best for: Higher-capacity tubeless tire pair.

Why it ranks #8: This tubeless 4.80-8 tire pair lists a 760-pound load capacity, but it is tire-only and requires compatible wheels.

A listed 760-pound load capacity makes this HALBERD pair a load-focused option for buyers replacing splitter tires. The set contains two tubeless 4.80-8 tires, identified as 6-ply and Load Range C, with an 8-inch rim size to compare against the existing wheel setup.

The two-tire set lets buyers replace a matching pair, while its tubeless construction identifies the tire format for compatible wheels. A 6-ply, Load Range C designation and stated 760-pound capacity offer concrete load-related details for checking the intended splitter use. The 4.80-8 size and 8-inch rim specification help establish whether these tires correspond to the existing wheels, while HALBERD lists lawn-and-garden and agricultural tires among its areas of specialization.

Skip it if you want a solid tire that avoids punctures; Ogracwheel’s 4.80×8 flat-free assembly uses solid rubber.

This pair fits buyers seeking tubeless 4.80-8 tires with a stated load figure for a splitter’s existing wheels. Check wheel compatibility and the full axle’s requirements rather than treating the tire capacity as an assembly rating.

Listed on Amazon as: 4.80-8 Trailer Tires Set of 2, Tubeless, 6PR, Load Range C

#9

9. HALBERD P819 Tire

• Size: 4.80-8
• Rim Size: 8 in
• Weight: 5.9 lb

Best for: Tubeless tire pair for rated loads.

Why it ranks #9: The tubeless 6-ply 4.80-8 pair lists a 745-pound load capacity, but the listing does not include wheel assemblies.

A stated 745-pound load capacity gives this HALBERD 4.80-8 tire pair a concrete figure for buyers assessing splitter hauling needs. The set is identified as tubeless, 6-ply, and Load Range C, with an 8-inch rim size; those specifications help narrow tire selection for compatible equipment.

The 4.80-8 size and 8-inch rim specification help buyers compare the tires with their existing wheel setup, while the tubeless construction identifies the tire format. A 6-ply, Load Range C designation and listed 745-pound capacity provide load-related details to consider for the splitter and its transport demands. HALBERD identifies its tire specialization across lawn and garden, agriculture, and small-trailer categories, contexts that overlap with utility equipment use.

Skip it if you need wheels and bearings included; Tkaimy’s ABIN8102 listing includes a wheel, 1-inch bearings, and hub cap.

Pick this pair if your splitter already has compatible 8-inch wheels and you want tubeless 4.80-8 tires with stated load details. It is a tire set, so account for the existing wheel and axle arrangement.

Listed on Amazon as: 4.80-8 Trailer Tires 6PR, Load Range C, Set of 2, Tubeless

#10

10. Kenda K371 Tire

• Size: 4.80/4.00-8 2 Pack
• Rim Size: 8 in
• Weight: 10.4 lb

Best for: Stable utility-trailer tire pair.

Why it ranks #10: These 4.80/4.00-8 bias-ply trailer tires list a 590-pound capacity, but the listing targets trailers and supplies tires rather than wheels.

A flatter tread profile is specified to improve stability and control while towing, making Kenda’s K371 pair relevant to splitter owners who haul equipment on a trailer. These 4.80/4.00-8 bias-ply tires feature a computer-optimized tread and a listed 590-pound load capacity for comparison with the intended application.

The flatter tread profile is identified as a stability and sway-control aid while towing, a practical consideration for moving a log splitter by utility trailer. Kenda pairs that profile with a computer-optimized tread intended to provide enhanced traction and a radial-like appearance while retaining bias-ply construction. The 4.80/4.00-8 size, 8-inch rim specification, and 590-pound capacity give buyers details to check against their wheels and load requirements.

Skip it if you need assembled wheels with bearings; RecStuff’s ABIN8101x2 listing includes silver integral wheels and 1-inch bearings.

Consider the Kenda pair when a splitter spends time being towed on a utility or cargo trailer and the existing wheels are suitable. Check the 8-inch rim size and 590-pound capacity against your setup.

Listed on Amazon as: Kenda K371 4.80/4.00-8 Loadstar Trailer Tires – 4.80-8/4.00-8 Bias Ply – Durable, High-Load Capacity for Utility Trailers, Cargo Trailers, and Boat (2 Pack)