Best Trailer Hitches For Campers for Bumper and Frame Mounts

#1 · Best Overall

1. CURT 13703 RV Hitch

• Material: Carbon Steel
• Compatible with Vehicle Type: ATV, Marine-Personal-Craft, Trailer
• Weight: 98.5 lb

Best for: Adjustable RV-frame receiver.

Why it ranks #1: Its adjustable RV-frame design adds a standard 2-inch receiver and is rated for 3,500 pounds gross trailer weight and 350 pounds tongue weight, within stated limits.

A 72-inch maximum span is the defining fit detail of the CURT 13703, an adjustable hitch that adds a standard 2-inch receiver to compatible RV, camper, and motorhome frames. It offers a mounting route for cargo carriers, towing accessories, or a small vehicle, with a stated 3,500-pound gross trailer weight rating.

The 2-by-2-inch receiver supports common towing accessories and cargo carriers, while the adjustable frame design accommodates compatible RV frames up to 72 inches. CURT rates it at 3,500 pounds gross trailer weight and 350 pounds tongue weight, limited by the RV frame, vehicle limits, and lowest-rated towing component. The listing explicitly excludes weight-distribution use, so buyers planning that setup need a different hitch type.

Skip it if you need a weight-distribution setup; the CURT 17063 includes a weight-distribution hitch and sway-control kit.

The CURT 13703 suits RV owners who need a frame-mounted receiver for accessories, cargo, or small-vehicle towing. Its 72-inch maximum span and exclusion of weight-distribution use are key boundaries to account for.

Listed on Amazon as: CURT 13703 Adjustable RV Trailer Hitch, 2-Inch Receiver, 72-Inch Max

#2 · Best 4-Inch Fit

2. TOPTOW RV Bumper Hitch

• Material: Alloy Steel
• Compatible with Vehicle Type: 4" X 4" RV REAR BUMPER
• Weight: 4.45 kg

Best for: Four-inch bumper accessory mount.

Why it ranks #2: Designed for 4-by-4-inch square bumpers, it offers a 2-inch receiver and 350-pound tongue capacity; its listing cautions against RV-level trailer towing.

The TOPTOW receiver fits a 4-by-4-inch square RV bumper and can be mounted upside down, giving compatible camper owners another position for a 2-inch-shank bike rack or cargo carrier. Its 350-pound tongue-weight capacity supports accessory use, but the listing expressly warns that this receiver is not intended for RV-level trailer towing.

The 2-by-2-inch opening connects with many standard bike racks and cargo carriers, while the 4-by-4-inch bumper fit narrows its intended mounting location. TOPTOW calls for the bolts to be secured tightly around the travel-trailer bumper and notes that the 5/8-inch hitch pin or lock is not included. That installation and accessory focus makes it useful for carrying gear, not for towing a trailer behind the RV.

Skip it if you intend to tow a trailer from the RV bumper; the CURT 13703 is a frame-mounted RV hitch rated for trailer towing.

Choose TOPTOW when you need a bumper-mounted 2-inch receiver for an accessory and have a 4-by-4-inch square bumper. Its explicit towing warning and separately sourced pin or lock set firm boundaries.

Listed on Amazon as: TOPTOW RV Bumper Hitch Receiver for 4in x 4in Beams,2in Receiver | Fits for Bike Racks, Cargo Carriers Camper-on, 3500lbs

#3 · Best Included Hardware

3. Ohuhu RV Bumper Hitch

• Material: Alloy Steel
• Compatible with Vehicle Type: Trailer

Best for: Included-pin bumper receiver.

Why it ranks #3: This 4-by-4-inch bumper receiver includes a hitch pin and cover, making it a useful accessory-mount option for compatible campers.

The Ohuhu includes both a hitch pin and a receiver cover, so the basic hardware for securing an accessory and covering the opening when unused comes with the bumper hitch. Its 2-inch receiver is intended for bike racks, tire racks, cargo racks, and other accessories on a 4-by-4-inch RV or travel-trailer bumper.

Ohuhu describes installation without welding, which makes this a practical choice for owners seeking a bumper-mounted accessory receiver rather than a welded frame setup. Its included pin helps secure a compatible rack, and the cap covers the receiver when it is idle. The alloy-steel construction has E-coat and black powder coating to help resist rust and corrosion; the listing also reports a 3,500-pound maximum towing capacity, so observe the application and component limits.

Skip it if you have a bumper outside the listed 4-by-4-inch size; the YZONA RV Bumper Hitch Receiver is described for beams from 2 to 4 inches.

The Ohuhu suits owners with a 4-by-4-inch bumper who want a simple accessory receiver with pin and cover included. Its stated bumper size and accessory-focused use should guide the fit decision.

Listed on Amazon as: Ohuhu RV Bumper Hitch 2" Receiver Adapter with Hitch Pin and Hitch Cover

#4 · Widest Beam Range

4. YZONA RV Bumper Hitch

• Material: Carbon Steel
• Compatible with Vehicle Type: RV
• Weight: 5.74 kg

Best for: Variable-width bumper fit.

Why it ranks #4: Its stated fit spans rear beams from 2 to 4 inches, with 3,500 pounds gross trailer weight and 350 pounds tongue weight listed.

A stated fit range from 2-inch to 4-inch rear beams gives the YZONA bumper receiver broader mounting-size coverage than a single-size beam listing. Its 2-inch receiver is aimed at camper cargo carriers, bike racks, tire carriers, and ball mounts, with maximum ratings of 3,500 pounds GTW and 350 pounds tongue weight.

The variable beam range can help owners match the hitch to different rear bumper dimensions, while the standard 2-inch opening accepts a range of common accessories. YZONA lists high-strength carbon steel and a black coating intended to guard against corrosion and damage, useful considerations for an exposed RV-mounted part. The 3,500-pound gross trailer weight and 350-pound tongue-weight ratings define its stated capacity; the towing setup remains limited by its lowest-rated component.

Skip it if you need a 525-pound tongue-weight rating; the maXpeedingrods Adjustable Universal RV Trailer Tow Hitch lists that capacity.

The YZONA fits buyers whose camper bumper falls within its stated 2-to-4-inch beam range and who need a 2-inch accessory receiver. Keep both listed capacity limits and the full towing setup in view.

Listed on Amazon as: RV Bumper Hitch Receiver, 2" Tow Hitch Trailer, 3500 LBS Capacity Fits 2 inch to 4 inch Rear Beams, Towing Adapter Openning for Camper Cargo Carrier Bike Racks RV Tire Carrier Ball Mounts

#5

5. Nilight RV Bumper Hitch

• Material: Alloy Steel, Carbon Steel
• Compatible with Vehicle Type: Trailer
• Weight: 3.76 kg

Best for: Compact rack-and-carrier add-on.

Why it ranks #5: Fits 4-to-4.5-inch beams and provides a 2-inch receiver, but its listed 200-pound tongue capacity makes loaded accessory weight a key constraint.

A 2-inch receiver opening gives the Nilight bumper hitch a familiar connection point for bike racks and cargo carriers with matching shanks. Its bolt-on format is intended for camper beams measuring 4 to 4.5 inches, making it an option for adding accessory-carrying capacity at the rear of a compatible RV.

The standard 2-by-2-inch opening works with many racks and carriers, while the stated 200-pound tongue-weight limit sets a clear boundary for loaded accessories. Nilight also lists 2,000 pounds gross trailer weight, subject to the lowest-rated towing component; that figure does not make this a substitute for checking the limits of the bumper and connected equipment. Its bolt-on design suits buyers seeking a bumper-mounted receiver rather than a frame-spanning hitch.

Skip it if you need a 350-pound tongue-weight rating for your accessory load; the YZONA RV Bumper Hitch Receiver lists that capacity.

Choose the Nilight for a compatible 4-to-4.5-inch camper beam and a rack or carrier with a 2-inch shank. Keep the 200-pound tongue-weight limit and the lowest-rated component in view when loading accessories.

Listed on Amazon as: Nilight RV Bumper Hitch Receiver Fits for 4-4.5 inches Beams 2 inch Receiver 200 LBS Capacity Bolt-On Heavy Duty Steel for Camper Bike Racks Cargo Carriers

#6

6. METOWARE RV Bumper Hitch

• Material: Alloy Steel
• Compatible with Vehicle Type: Car, RV, Truck

Best for: 350-pound accessory capacity.

Why it ranks #6: A 4-inch square-bumper receiver with a 2-inch opening and 350-pound tongue capacity, suited to compatible accessory loads.

A 350-pound tongue-weight capacity gives the METOWARE bumper receiver a clearly stated limit for loaded accessories such as bike racks and cargo carriers. It has a standard 2-by-2-inch opening and is described for a 4-inch square bumper, making it a rear-mounted option for compatible RVs and other listed vehicles.

The 2-inch receiver opening supports many Class III and IV ball mounts, bike racks, and cargo carriers, so the same bumper-mounted receiver can serve different accessory needs. METOWARE lists 3,500 pounds maximum towing capacity and 350 pounds tongue weight, but the product is identified as a bumper receiver; buyers should keep the ratings of the bumper and connected components in the calculation. Alloy-steel construction provides the stated material basis for the hitch.

Skip it if you need a receiver listed for a range of beam sizes from 2 to 4 inches; the YZONA RV Bumper Hitch Receiver specifies that range.

Consider METOWARE for a compatible 4-inch square bumper and accessories that stay within its 350-pound tongue-weight limit. Its standard opening and stated capacities suit accessory use, subject to bumper and component limits.

Listed on Amazon as: RV Bumper Hitch Receiver Fits 4" Square Bumper, 3500 LBS Capacity

#7

7. Stromberg Carlson CC-300

• Material: Alloy Steel
• Compatible with Vehicle Type: Car, Trailer
• Weight: 46.9 lb

Best for: Frame-mounted accessory receiver.

Why it ranks #7: Creates a 2-inch accessory receiver on travel trailers and fifth wheels, with bolted Class I or welded Class II installation options.

The Stromberg Carlson CC-300 offers two mounting routes: bolt it on as a Class I hitch or weld it to the frame as a Class II hitch. It adds a 2-inch receiver to travel trailers and fifth wheels for bike racks and cargo carriers, giving owners an accessory-carrying option at the back of a camper.

Its receiver is intended for racks and carriers rather than being described with a trailer-towing capacity, so it suits buyers seeking to transport gear behind an RV. The choice between a bolted Class I setup and welded Class II installation gives the mounting method a direct role in the project. Because the hitch attaches to the frame, buyers planning installation should account for that work and choose the option that matches their setup.

Skip it if you want a bumper-mounted receiver without welding; the Ohuhu RV Bumper Hitch installs without complicated welding on a compatible bumper.

The CC-300 suits travel-trailer or fifth-wheel owners adding a receiver for bikes or cargo and able to use a frame mounting method. Choose between its bolted Class I and welded Class II options.

Listed on Amazon as: Stromberg Carlson CC-300 Adjustable Accessory Hitch – Hitch Receiver for Bike Rack and Carriers, Ideal for Back of Camper, Travel Trailer & RV, Camper Trailer Hitch, Adjustable Truck Hitch, Black

#8

8. maXpeedingrods RV Hitch

• Compatible with Vehicle Type: RV
• Weight: 39250 g

Best for: Wide-frame RV hitch setup.

Why it ranks #8: Its adjustable frame hitch fits frames up to 72 inches wide and lists 3,500 pounds gross trailer weight and 525 pounds tongue weight.

The maXpeedingrods hitch fits RV frames up to 72 inches wide, making its adjustable universal frame span the key feature for buyers needing a broad mounting range. It provides a 2-inch square receiver opening and lists 3,500 pounds gross trailer weight with 525 pounds tongue weight, subject to the lowest-rated towing component.

The frame-width range up to 72 inches can accommodate compatible RV setups across a broad span, while the 2-inch receiver accepts matching accessories. Its carbon-steel construction and powder-coated finish are specified for strength and rust protection, relevant for a hitch exposed to road conditions. The 3,500-pound GTW and 525-pound tongue-weight ratings give owners concrete limits, but the listing says to defer to the lowest-rated towing component.

Skip it if you need a gross trailer weight rating above 3,500 pounds; the CAMPX Adjustable Trailer Hitch lists higher capacities with its matching ball.

Choose this maXpeedingrods hitch for an RV frame up to 72 inches wide and a towing setup within its stated ratings. Check the frame and every connected component against the listed limits.

Listed on Amazon as: maXpeedingrods Adjustable Universal RV Trailer Tow Hitch up 72" Frame

#9

9. CAMPX Adjustable Hitch

• Material: Alloy Steel, Aluminum
• Compatible with Vehicle Type: Truck, RV, ATV, SUV
• Weight: 8.49 kg

Best for: Adjustable ball-height towing.

Why it ranks #9: Fits standard 2-inch receivers and adjusts 6 inches in drop or rise, but it is a ball-mount hitch rather than a camper-mounted receiver.

Six inches of drop or rise, adjustable in one-inch increments, lets this CAMPX hitch change ball height to suit different towing setups. Its 2-inch receiver fit and two ball capacities make it relevant to campers and other trailers, with a 2-5/16-inch ball rated up to 14,500 pounds GTW and a 2-inch ball up to 10,000 pounds.

The 1-inch adjustment steps across the 6-inch drop/rise range let owners tune trailer height without selecting a fixed-height mount. CAMPX specifies a 2-inch receiver and compatibility with Class III, IV, and V towing systems, spanning trucks, SUVs, RVs, and campers. The separate ratings for its 2- and 2-5/16-inch balls help match the hitch to a trailer’s connection, while the applicable towing system remains a limiting factor.

Skip it if you need a frame-mounted RV receiver rather than a ball mount for an existing 2-inch receiver; the CURT 13703 adds one to compatible RV frames.

Pick the CAMPX for a camper or trailer setup that needs adjustable ball height and the appropriate included ball size. Its 2-inch receiver fit and system class compatibility are essential boundaries for choosing it.

Listed on Amazon as: Adjustable Trailer Hitch Fits 2" Receiver 6-Inch Drop/Rise, Black

#10

10. CURT 17063 Weight Distribution Hitch

• Material: Carbon Steel
• Compatible with Vehicle Type: Trailer
• Weight: 100 lb

Best for: Heavy-trailer weight distribution.

Why it ranks #10: This 10,000-to-14,000-pound weight-distribution system is for leveling a tow vehicle and trailer, not adding a camper receiver for accessories.

The CURT 17063 combines round-bar weight distribution with an included sway-control kit to help level a tow vehicle and trailer and reduce trailer sway. Its stated range is 10,000 to 14,000 pounds GTW, with 1,000 to 1,400 pounds tongue weight, making it a setup for heavier trailers rather than a simple accessory receiver.

Spring bars distribute tongue weight across the tow vehicle and trailer, supporting a more level load and smoother, more controlled towing. The included sway-control kit addresses trailer movement, while grease zerks at the hitch head make lubrication accessible at the spring-bar mounts; CURT says grease must be applied for proper operation. The kit also includes a pre-torqued 2-5/16-inch ball, hookup brackets, and a lift handle, so installation involves several components.

Skip it if you need a simple receiver for a bike rack or cargo carrier; the Ohuhu RV Bumper Hitch includes a 2-inch receiver and pin.

This CURT kit fits owners towing within its 10,000-to-14,000-pound GTW and 1,000-to-1,400-pound tongue-weight range who want weight distribution and sway control. Its lubrication requirement and full setup matter.

Listed on Amazon as: CURT 17063 Round Bar Weight Distribution Hitch with Sway Control, 14,000 lb