Best Hydraulic Motor For Snowblower: Compare 10 Replacements

#1 · Best Overall

1. IMIFAFTAbT 104-3578-006

Best for: Listed Bobcat snowblower fitments.

Why it ranks #1: It explicitly fits Bobcat Snowblower SB240, 2118, 2418, and SB200 models and lists matching references 6673411 and 1043578006.

Named fitment for Bobcat SB240, 2118, 2418, and SB200 snowblowers is the defining advantage of this 104-3578-006 motor. For owners of those machines, the listed model coverage provides a more direct replacement lead than a general-purpose motor listing, provided the part number matches the original.

The motor is also identified by part numbers 6673411 and 1043578006, giving buyers several references to compare with the existing component or machine documentation. The package includes one hydraulic motor. The supplied instructions emphasize confirming the part number and allow buyers to provide the engine serial number and nameplate if identification is uncertain. The listing does not state shaft dimensions, mount pattern, or port details, so model and part-number verification remain central.

Skip it if you need a stated Char-Lynn 2000 Series motor with an SAE A flange and keyed shaft; SINOCMP’s 104-1025-006 specifies that interface.

For owners of the listed Bobcat snowblower models, this is a focused replacement candidate when 104-3578-006 or its alternate numbers match. Verify identification carefully; detailed shaft and port specifications are not supplied.

Listed on Amazon as: 104-3578-006 6673411 1043578006 Hydraulic Motor Fits for Bobcat Snowblower SB240 2118 2418 SB200

#2 · Spreader Applications

2. Buyers Products CM004PH

Best for: Medium-duty auger applications.

Why it ranks #2: Its 2.8-cubic-inch displacement, four-bolt mount, and NPT threads are specified, and the listing includes spreaders among its intended applications.

A 2.8-cubic-inch displacement paired with a four-bolt mount and NPT threads gives the Buyers Products motor a clearly specified interface for medium-duty hydraulic equipment. Its listed applications include augers and spreaders, making it relevant to snowblower shoppers whose machine uses those mounting and thread arrangements.

The industry-proven spool valve design works alongside state-of-the-art gerotors, which the listing connects with start-up torque and a useful mixture of torque and flow rate. That combination supports medium-duty applications such as augers, winches, cranes, compressors, and spreaders. The compact motor is also described as efficient and powerful. Before considering it for a snowblower, the four-bolt mounting pattern, NPT threads, and 2.8-cubic-inch displacement must match the machine’s hydraulic system.

Skip it if you need a named Bobcat snowblower replacement; IMIFAFTAbT’s 104-3578-006 lists SB240, 2118, 2418, and SB200.

This is a candidate for buyers whose medium-duty snowblower auger system matches its four-bolt flange, NPT threads, and displacement. Its listed application is general equipment, so confirm the machine’s hydraulic and mounting requirements.

Listed on Amazon as: Hydraulic Motor with 4-Bolt Mount/NPT Threads and 2.8 Cubic Inches Displacement

#3 · Keyed Shaft Option

3. SINOCMP Char-Lynn 2000

Best for: Char-Lynn 2000 Series replacements.

Why it ranks #3: This direct replacement for the Eaton Char-Lynn 2000 Series specifies a 1.25-inch keyed shaft and SAE A two-bolt mount for fit checks.

The SAE A two-bolt mount and 1.25-inch straight keyed shaft give this SINOCMP motor a defined replacement interface for Eaton Char-Lynn 2000 Series equipment. That specification-led fit can simplify a snowblower motor swap when the original uses the matching pattern, pilot diameter, shaft, and port configuration.

Its Geroler design and cast-iron construction identify it as a replacement motor for agricultural and industrial equipment, while the keyed shaft provides a clear mechanical connection point. The package includes one motor, and the supplied guidance calls for flushing hydraulic lines before installation. Check the 4.19-inch pilot diameter, two-bolt pattern, shaft size, and port configuration against the snowblower’s original motor; this is not a universal-fit option.

Skip it if you need a motor specifically listed for Bobcat SB240, 2118, 2418, or SB200 snowblowers; IMIFAFTAbT’s 104-3578-006 names those models.

For a snowblower owner replacing a Char-Lynn 2000 Series motor, this offers a specific mount and shaft combination. It suits only equipment matching its 4.19-inch pilot, two-bolt flange, keyed shaft, and hydraulic ports.

Listed on Amazon as: 104-1025-006 1041025006 104-1025 for Eaton Char-Lynn 2000 Series Hydraulic Motor, SAE A 2-Bolt Mount, 1.25 Inch Keyed Shaft, Geroler Design, Replacement for Agricultural & Industrial Equipment

#4 · Rated Output Detail

4. SHOUMANUAL BMR-400

Best for: Reversible BMR-400 applications.

Why it ranks #4: It lists 400cc displacement, 55L/min flow, 190N·m rated torque, and an 8.5MPa rated pressure for buyers comparing system requirements.

Forward-and-reverse rotation, adjustable speed, and controllable torque make this BMR-400 motor a flexible option for hydraulic equipment with changing operating demands. Its stated 190 N·m rated torque and 135 RPM rated speed give snowblower buyers concrete operating figures to compare with their machine’s requirements.

The 400cc displacement and 55 L/min rated flow describe the hydraulic capacity, while the G1/2 oil port and 25mm shaft define important connection points. Precision-machined column stator and rotor are associated with low starting pressure and smooth rotation. Cast iron and low-carbon alloy steel are listed materials. Together, these details help assess a potential replacement, but the BMR-400 designation alone does not establish compatibility with a particular snowblower’s mount or hydraulic circuit.

Skip it if you need a motor named for Bobcat SB240, 2118, 2418, or SB200; IMIFAFTAbT’s 104-3578-006 lists those machines.

Consider this for a snowblower owner who can match BMR-400 capacity, 25mm shaft, G1/2 port, and mounting arrangement. Its reversible operation and stated ratings are useful only when they suit the machine’s system.

Listed on Amazon as: 2-Bolt Hydraulic Motor Replacement, BMR-400, 25mm Shaft, G1/2 Oil Port

#5

5. Weonefit Char-Lynn 101-1003

Best for: One-inch keyed shaft setups.

Why it ranks #5: The listing identifies a one-inch straight shaft with Woodruff key and four-bolt flange, useful details when matching an existing installation.

A one-inch straight shaft with a Woodruff key and four-bolt flange gives this Weonefit motor a specific mechanical interface for replacement planning. It is identified for Char-Lynn 101-1003-009 and Eaton 101-1003, making it relevant to snowblower owners whose existing motor carries those numbers.

The listed replacement numbers provide a direct cross-reference, while the straight keyed shaft and four-bolt flange help buyers compare the motor’s physical connection with their equipment. The supplied application examples include swing motors, brush cutters and mowers, directional boring, and turf equipment. Those uses show a broad equipment context, but no snowblower model, hydraulic ratings, or port dimensions are provided. Compatibility therefore depends on matching the existing motor beyond its model identification.

Skip it if you require a listed Bobcat snowblower fitment; IMIFAFTAbT’s 104-3578-006 names the SB240, 2118, 2418, and SB200.

This is a targeted option for owners matching Char-Lynn 101-1003-009 or Eaton 101-1003 with a one-inch keyed shaft and four-bolt flange. Treat snowblower use as conditional on matching the full hydraulic setup.

Listed on Amazon as: 101-1003-009 Hydraulic Motor Replacement for Char-Lynn 101-1003-009 Eaton 101-1003, 1 inch Straight with Woodruff Key, Straight Shaft Motor, 4 Bolt Flange

#6

6. Zachager Char-Lynn H Series

Best for: Reinforced Char-Lynn H Series swaps.

Why it ranks #6: It replaces Eaton Char-Lynn H Series part 101-1038-009 and describes an added reinforcing bolt, but gives no snowblower-specific application.

An added center reinforcing bolt distinguishes Zachager’s 101-1038-009 replacement for Eaton Char-Lynn H Series motors. The seller says this reinforcement improves structural strength and stability under high-speed, heavy-load operation, a useful consideration for a snowblower that places sustained demands on its hydraulic drive.

The direct-replacement designation and original numbers 101-1038-009 and 101-1038 give owners a specific identification route. The extra middle bolt is described as reducing vibration and improving operational safety without affecting the original operation. Those details speak to structure during loaded use, but the supplied information does not give shaft, port, or mounting dimensions. Match those interfaces to the snowblower’s existing motor before treating the H Series designation as sufficient.

Skip it if you need the 2000 Series SAE A two-bolt and 1.25-inch keyed interface; SINOCMP’s Char-Lynn replacement specifies those details.

This suits an owner identifying a failed motor as Char-Lynn H Series 101-1038-009 and valuing the added reinforcement. Check shaft, ports, and mounting details, since the listing does not specify them.

Listed on Amazon as: 101-1038-009 Hydraulic Motor Replacement for Eaton Char-Lynn H Series

#7

7. Zachager Char-Lynn S Series

Best for: Reinforced Char-Lynn S Series swaps.

Why it ranks #7: It is a direct replacement for Eaton Char-Lynn S Series part 103-1016-012, though the provided details do not establish snowblower compatibility.

An added center reinforcing bolt sets this Zachager 103-1016-012 replacement apart for Eaton Char-Lynn S Series applications. The seller links the reinforcement to greater structural strength and improved stability under high-speed, heavy-load operation, making the feature relevant when a snowblower places substantial demands on its hydraulic motor.

The stated original numbers, 103-1016-012 and 103-1016, give buyers a specific reference for identifying an S Series replacement. Zachager says the middle bolt reduces vibration and improves operational safety without affecting operation. That reinforcement may matter during loaded work, but the supplied facts do not provide shaft size, mounting pattern, or port configuration. Match those physical details with the snowblower’s original motor rather than relying on series identification alone.

Skip it if you need a listed Bobcat snowblower replacement with named model coverage; IMIFAFTAbT’s 104-3578-006 specifies four Bobcat models.

For owners matching Eaton Char-Lynn S Series 103-1016-012, this provides a replacement reference and added structural reinforcement. Check shaft, mounting, and port interfaces before choosing it for a snowblower.

Listed on Amazon as: 103-1016-012 Hydraulic Motor Replacement for Eaton Char-Lynn S Series

#8

8. XUFOPLY Char-Lynn 101-1701

Best for: Low-speed high-torque H Series.

Why it ranks #8: It is a replacement for Char-Lynn 101-1701-009 and specifies a one-inch shaft length, but provides no snowblower application match.

Low-speed, high-torque operation is the central promise of this XUFOPLY orbital motor, listed as a replacement for Char-Lynn 101-1701-009 and Eaton 101-1701. That combination makes it relevant to snowblower buyers seeking controlled rotation, provided the machine uses the specified H Series replacement application.

The cast-iron housing protects the shaft, and the listing describes the simpler structure as easier to maintain than other motors. A column-mounted rotating stator design is associated with low-pressure starting, adjustable speed, and controlled torque. The straight shaft is listed at one-inch length, with a standard mounting type. Installation instructions are not included, so buyers should plan installation around their existing equipment documentation and verify the motor’s ports and mounting interface.

Skip it if you need a replacement with a stated Bobcat snowblower model fitment; IMIFAFTAbT’s 104-3578-006 lists four Bobcat models.

This suits a buyer matching a Char-Lynn H Series 101-1701 motor who values low-speed, high-torque operation and a cast-iron housing. Confirm port and mounting details, and account for the lack of included instructions.

Listed on Amazon as: Hydraulic Motor, Low Speed High Torque Orbital Motor Hydraulic Replacement Motor for 101-1701 Char-Lynn Eaton Charlynn H Series 101-1701-009

#9

9. Zachager OMS160-151F0563

Best for: OMS160 shaft replacement projects.

Why it ranks #9: It lists OE references 151F-0563 and OMS160-151F0563, but the supplied information does not identify a snowblower fit or key dimensions.

The 1 3/8-inch Z6 shaft identifies Zachager’s 151F-0563 motor as a specific replacement option for OMS160-151F0563 applications. Its stated OE numbers and direct drop-in positioning give snowblower owners a concrete starting point when matching a failed motor, rather than relying on a generic hydraulic-motor description.

The listing names 151F-0563, OMS160-151F0563, and 151F0563 as matching numbers, helping buyers compare the replacement with the existing assembly. A high-strength forged-steel housing and precision internal components are presented for heavy use and temperature exposure; the sealed design is described as resisting leakage and dust. Those claims are relevant to demanding operation, but the supplied facts do not identify a snowblower model or mounting dimensions beyond the shaft specification.

Skip it if you need a replacement explicitly listed for Bobcat SB240, 2118, 2418, or SB200; IMIFAFTAbT names those snowblower models.

For a buyer replacing an OMS160 motor with matching 151F-0563 identification and a 1 3/8-inch Z6 shaft, this offers a targeted route. Snowblower fit depends on matching the remaining installation details.

Listed on Amazon as: 151F-0563 Hydraulic Motor Replacement OMS160-151F0563 Shaft 1 3/8" Z6

#10

10. ZFQPTO BM2-315

Best for: BM2/BMR hydraulic replacements.

Why it ranks #10: This BM2/BMR-series motor is described generally and requires connection to an oil pump; no snowblower fit or installation dimensions are established.

A four-hole BM2-315 configuration and low-speed, high-torque description define this ZFQPTO motor for buyers replacing compatible BM2/BMR hydraulic units. The listing names a broad set of BM-series references, giving a snowblower owner a useful part-family check before evaluating the motor’s fit in the machine.

The listed replacement references include BM263, BM280, BM2100, BM2250, BM2315, BM2400, and BM236, while the title identifies BM2-315 and four holes. The motor must connect to an oil pump and be filled with hydraulic oil before starting; following that preparation is essential to the stated setup. The listing describes metal construction and durable performance but supplies no snowblower model, port dimensions, or detailed mounting measurements.

Skip it if you need a Bobcat SB240, 2118, 2418, or SB200-specific replacement; IMIFAFTAbT’s 104-3578-006 lists those snowblowers.

This may suit owners whose existing motor matches the listed BM2/BMR references and four-hole arrangement. It requires an oil pump and oil fill before startup, and snowblower compatibility depends on matching unspecified port details.

Listed on Amazon as: HVVLHPHBK-BM2-3154-HOLE Hydraulic Motor, Low Speed and High Torque BM2/BMR125/63/80/100/250/315/400/36 Oil Motor Size – BM2-315 4-Hole