A strong outboard propeller matches your engine’s fit requirements and pitch, with the right blade material and hub arrangement for your setup. The Quicksilver BlackMax is a strong starting point for Mercury and Mariner owners seeking a 13 1/4 x 17 aluminum propeller with a Flo-Torq II hub kit. This roundup also includes options for smaller motors, BRP Johnson and Evinrude engines, and higher-horsepower Mercury applications.
The products differ substantially: the listed engine ranges run from small 2.5–3.5 HP applications to 300 HP, and not every propeller is interchangeable. Use the exact engine make, horsepower, gearcase, spline and existing propeller details to narrow the list before choosing.
The product descriptions provide useful fit clues, but they do not establish performance on every boat or operating setup.
The Quicksilver BlackMax is the Best Propeller For Outboard Motor in this selection for Mercury and Mariner owners whose engine matches its stated fit range. It is a 13 1/4 x 17P, three-blade aluminum propeller, and its included Flo-Torq II Hub Kit is specified as helping protect the drivetrain from most minor impact damage. Its fit covers Mercury and Mariner 40–60 HP BigFoot/Command Thrust engines and 75–125 HP outboards, subject to checking the precise engine and hub requirements.
Our Top Picks
Best OverallQuicksilver BlackMax Propeller
Its 13 1/4 x 17P aluminum propeller covers specified Mercury and Mariner applications, and the included Flo-Torq II hub kit adds useful drivetrain protection.
View on Amazon
Included Hub KitThe 13 1/4 x 17 aluminum propeller lists Mercury 40–140 HP fit and includes a 835257Q1 Flo-Torq II hub kit.
View on Amazon
Broad Mercury FitThis three-blade, right-hand aluminum propeller specifies Mercury 40–140 HP fit, a 15-tooth spline and OEM replacement part 48-77344A45.
View on Amazon- Four-Blade Stainless CAPTAIN 13 x 19 Propeller
Compare these propellers by fit, material and blade design
| # | Product | Material | Weight | Material Type | Buy |
|---|---|---|---|---|---|
| 1 | 1. Quicksilver BlackMax PropellerBest Overall | — | 255 g | — | View on Amazon |
| 2 | 2. Qiclear 13 1/4 x 17 PropellerIncluded Hub Kit | Aluminum | — | — | View on Amazon |
| 3 | 3. OULEME 13 1/4 x 17 PropellerBroad Mercury Fit | Aluminum | — | Aluminum | View on Amazon |
| 4 | 4. Qiclear 13 1/4 x 17 PropellerMercury aluminum replacement | Aluminum | 6 lb | Aluminum | View on Amazon |
| 5 | 5. CAPTAIN 13 x 19 PropellerFour-Blade Stainless | — | — | — | View on Amazon |
| 6 | 6. OULEME 14 1/2 x 19 PropellerHigher-horsepower Mercury replacement | Aluminum | — | Aluminum | View on Amazon |
| 7 | 7. JSPROP 12 1/4 x 15 PropellerJohnson Evinrude aluminum replacement | Aluminum | — | — | View on Amazon |
| 8 | 8. VIF 10 3/8 x 13 PropellerSmall Mercury saltwater backup | Aluminum | 3.7 lb | Aluminum | View on Amazon |
| 9 | 9. MOPFOL Hangkai 3.5 HP PropellerHangkai 3.5 hp direct replacement | Aluminum | 10.56 oz | Aluminum | View on Amazon |
| 10 | 10. NovelBee Tohatsu Drill PropellerSmall Tohatsu drill-propeller users | Nylon | 0.3 kg | Nylon | View on Amazon |
Detailed Reviews: Best Propeller For Outboard Motor

#1 · Best Overall
1. Quicksilver BlackMax Propeller
- Weight: 255 g
Best for: Mercury owners prioritizing hub protection.
Why it ranks #1: Its 13 1/4 x 17P aluminum propeller covers specified Mercury and Mariner applications, and the included Flo-Torq II hub kit adds useful drivetrain protection.
The included Flo-Torq II Hub Kit is this Quicksilver BlackMax propeller’s clearest practical distinction, with the manufacturer stating that it helps protect the drivetrain from most minor damage-causing impacts. Its 13 1/4 x 17 three-blade aluminum configuration is listed for specific Mercury and Mariner outboard applications.
The listed fit covers Mercury and Mariner 40–60 hp BigFoot/Command Thrust engines of all years, plus 75–125 hp outboards from 1978 onward, giving buyers specific application boundaries to check. Mercalloy aluminum is described as strong yet ductile enough to handle minor impacts, and the included Flo-Torq II kit is stated to help protect the drivetrain during many such impacts. A glossy Phantom Black enamel finish helps prevent corrosion, adding a relevant surface-maintenance benefit.
- Flo-Torq II Hub Kit 835257K1 included
- Mercalloy alloy is described as ductile for minor impacts
- Phantom Black enamel finish helps prevent corrosion
- Specific Mercury and Mariner application ranges are listed
- The listed fit excludes Mercury and Mariner horsepower applications outside the stated ranges.
Skip it if you have a Mercury 135–300 hp engine; the OULEME 14 1/2 x 19 model lists that higher-horsepower range.
This is a strong fit to consider for owners of the specified Mercury or Mariner engines who want a propeller with an included drivetrain-protection hub kit. Its application years and horsepower boundaries matter; check them against your outboard.
Full product details
| Brand | Quicksilver |
|---|---|
| Item Dimensions LxWxH | 16.75 x 7 x 17 inches |
| Item Package Dimensions L x W x H | 16.6 x 16.6 x 6.7 inches |
| Item Weight | 255 g |
| Manufacturer | Boating Accessories |
| Package Weight | 3.74 kg |
Listed on Amazon as: Mercury Marine BlackMax 3 Blade Aluminum Prop Propeller 13-1/4 x 17P 48-77344A45
View on Amazon
#2 · Included Hub Kit
2. Qiclear 13 1/4 x 17 Propeller
- Material: Aluminum
Best for: Mercury owners seeking hub kit.
Why it ranks #2: The 13 1/4 x 17 aluminum propeller lists Mercury 40–140 HP fit and includes a 835257Q1 Flo-Torq II hub kit.
An included Flo-Torq II hub kit is the practical differentiator on this Qiclear 13 1/4 x 17 aluminum propeller, giving Mercury owners a stated kit component with the replacement. Its listed 40–140 hp range offers broad application coverage, though the model name specifically references several Mercury horsepower options.
The 13 1/4 x 17 pitch and diameter describe the propeller configuration, while the included 835257Q1 Flo-Torq II hub kit gives buyers a specified component to account for during replacement planning. Qiclear lists Mercury 40–140 hp compatibility, but its model name narrows the named engines to 60, 75, 90, 100, and 115 hp. CNC production and high-quality aluminum with vacuum casting and five-layer surface processing are stated construction details; confirm the motor application against those listings.
- Includes 835257Q1 Flo-Torq II hub kit
- 13 1/4 x 17 pitch configuration
- Listed for Mercury 40–140 hp
- Aluminum propeller with stated vacuum casting and five-layer surface processing
- The model name lists 60–115 hp examples despite the broader 40–140 hp title range.
Skip it if you need an explicitly described engine-protective hub kit; Quicksilver BlackMax names its Flo-Torq II kit's drivetrain-protection role.
This is for Mercury owners whose application matches its listed horsepower range and who value an included Flo-Torq II kit. The title and model name differ in range, so resolve that fit detail before selecting it.
Full product details
| Brand | Qiclear |
|---|---|
| Color | black |
| Included Components | 835257Q1 Flo-Torq II Hub Kits Included |
| Item Dimensions LxWxH | 13 x 13 x 7 inches |
| Item Package Dimensions L x W x H | 14.75 x 14.75 x 7.5 inches |
| Manufacturer | Qiclear Marine |
| Material | Aluminum |
| Model | Boat Propeller for Mercury Outboard Motors 60 75 90 100 115 HP |
| Package Weight | 3.56 kg |
| Size | Large |
| Style | outboard boat propeller |
| Warranty Description | 1 year |
Listed on Amazon as: 13 1/4×17 Pitch 48-77344A45 Boat Propeller for Mercury 40-140HP
View on Amazon
#3 · Broad Mercury Fit
3. OULEME 13 1/4 x 17 Propeller
- Material: Aluminum
- Material Type: Aluminum
Best for: Mercury 40–140 hp direct replacement.
Why it ranks #3: This three-blade, right-hand aluminum propeller specifies Mercury 40–140 HP fit, a 15-tooth spline and OEM replacement part 48-77344A45.
A direct-replacement listing for Mercury 40–140 hp engines with a 4 1/4-inch gearcase makes this OULEME aluminum propeller’s application unusually explicit. The specified 13 1/4 x 17 configuration, 15-tooth spline, three blades, and right-hand rotation give buyers several concrete checks for a replacement decision.
The stated Mercury 40–140 hp range and 4 1/4-inch gearcase define the listed application, while the 15-tooth spline and right-hand rotation provide further fit details to compare with the motor. Its 13 1/4-inch diameter and 17-inch pitch specify the configuration, and the three-blade aluminum construction keeps material and blade count clear. OULEME says quality checks occur through casting, machining, painting, and packaging, supporting buyers who value a stated production-control process.
- Direct replacement listed for Mercury 40–140 hp with 4 1/4-inch gearcase
- 13 1/4-inch diameter and 17-inch pitch
- 15-tooth spline and right-hand rotation specified
- Three-blade aluminum construction
- This listing specifies a 4 1/4-inch gearcase, limiting its stated fit to that application.
Skip it if you have a Mercury 135–300 hp engine with a 4 3/4-inch gearcase; OULEME's 14 1/2 x 19 model lists that application.
This suits Mercury owners within the listed 40–140 hp, 4 1/4-inch gearcase range who want a defined three-blade aluminum replacement. Match the spline, rotation, dimensions, and gearcase details to your motor before choosing it.
Full product details
| Brand | OULEME |
|---|---|
| Color | Black |
| Included Components | propeller |
| Manufacturer | OULEME |
| Manufacturer Warranty Description | 1 Year |
| Material | Aluminum |
Listed on Amazon as: Aluminum Boat Propeller, 13 x 17-4B, 13 1/4 x 17, 13 3/4 x 15, 14 x 11, 14 x 13, for Mercury Outboard 40-140 HP Motors, 15 Tooth Spline, 3/4-Blade, RH
View on Amazon
#4
4. Qiclear 13 1/4 x 17 Propeller
- Material: Aluminum
- Weight: 6 lb
- Material Type: Aluminum
Best for: Mercury aluminum replacement.
Why it ranks #4: Its aluminum 13 1/4 x 17 propeller lists a 48-77344A45 part number and Mercury 60–125 HP fit, though included hub details are not supplied.
The 13 1/4-inch diameter and 17-inch pitch give this Qiclear aluminum propeller a defined replacement configuration for Mercury outboards listed from 60 to 125 hp. Its CNC-machined construction and stated focus on durability without sacrificing top speed make it a candidate for owners seeking a conventional three-digit horsepower-range propeller.
This propeller is specified for Mercury 60–125 hp applications, and the 13 1/4 x 17 dimensions give buyers concrete measurements to compare with their existing setup. Aluminum construction keeps the product in a familiar material category, while Qiclear says CNC machining and strict quality control support durability without sacrificing top speed. Those details may help owners weighing replacement against ongoing use, but the supplied information does not identify a hub kit or spline count, so verify the relevant application details before ordering.
- 13 1/4-inch diameter and 17-inch pitch are specified
- Listed for Mercury 60–125 hp outboards
- Aluminum construction
- Manufacturer states CNC machining and strict quality control
- No hub kit or spline count is specified in the supplied details.
Skip it if you need a propeller with a clearly listed included hub kit; the Quicksilver BlackMax 48-77344A45 includes a Flo-Torq II kit.
This suits a Mercury owner in the listed 60–125 hp range who wants an aluminum 13 1/4 x 17 propeller. Check the application details against your motor, since hub-kit and spline information are not supplied here.
Full product details
| Brand | Qiclear |
|---|---|
| Color | Black |
| Dimensions | 13.8"D x 7.5"W x 13.8"H |
| Item Weight | 6 pounds |
| Manufacturer | Qiclear Marine |
| Part Number | 48-77344A45 |
| Material | Aluminum |
| Model Number | 13.25 x17 |
| Operation Mode | Electric |
| Recommended Uses | boating, water sports, and marine transportation |
Listed on Amazon as: 13 1/4 x17 Boat Propeller 48-77344A45 for Mercury 60-125 hp
View on AmazonWhy it ranks #5: The four-blade stainless-steel propeller offers a distinct alternative, with a 13-inch diameter, 19-inch pitch and stated Mercury and Force engine applications.
Four stainless-steel blades distinguish this CAPTAIN propeller from the aluminum three-blade options in this roundup, giving buyers a specific construction and blade-count choice. It is listed at 13 inches diameter and 19-inch pitch, with a 15-spline tooth and right-hand rotation for a range of Mercury and Force outboards.
The 13 x 19 dimensions, 15-spline tooth, and right-hand rotation give buyers several concrete configuration points to compare with their current propeller. Its four-blade stainless-steel construction also makes material and blade count explicit during selection. The listing names Mercury and Force applications from 40 through 140 hp with several stated exceptions and ranges; because those application details vary, checking the engine's exact listing is important before installation.
- Four-blade stainless-steel construction
- 13-inch diameter and 19-inch pitch specified
- 15-spline tooth specified
- Right-hand rotation specified
- The supplied listing does not specify an included hub kit.
Skip it if you want an explicitly included drivetrain-protection hub kit; Quicksilver BlackMax 48-77344A45 lists a Flo-Torq II kit.
Consider this for a Mercury or Force owner whose listed application matches and who specifically wants four stainless-steel blades. Verify the exact engine range and spline details; the supplied information does not identify an included hub kit.
Full product details
| Brand | CAPTAIN |
|---|---|
| Item Package Dimensions L x W x H | 15.39 x 14.21 x 7.56 inches |
| Manufacturer | Captain Marine |
| Package Weight | 6.26 kg |

#6
6. OULEME 14 1/2 x 19 Propeller
- Material: Aluminum
- Material Type: Aluminum
Best for: Higher-horsepower Mercury replacement.
Why it ranks #6: This three-blade, right-hand aluminum propeller is specified for Mercury 135–300 HP engines and MerCruiser sterndrives, with a 15-tooth spline.
The stated 135–300 hp Mercury range and 4 3/4-inch gearcase make this OULEME aluminum propeller a higher-horsepower replacement option. Its key configuration is 14 1/2 inches in diameter and 19 inches in pitch, with a 15-tooth spline, three blades, and right-hand rotation specified.
The listed Mercury 135–300 hp range and 4 3/4-inch gearcase identify the intended application, while the named 15-tooth spline and right-hand rotation help buyers compare the connection and direction details. Its 14 1/2 x 19 configuration is the key dimensional reference, and the three-blade aluminum construction clarifies the propeller type. The listing also names Mercury/Mercruiser Alpha One and provides model-year application notes, so checking the exact engine or sterndrive listing is essential.
- Listed for Mercury 135–300 hp with 4 3/4-inch gearcase
- 14 1/2-inch diameter and 19-inch pitch
- 15-tooth spline and right-hand rotation specified
- Three-blade aluminum construction
- The stated application is limited to the 4 3/4-inch gearcase category.
Skip it if you need a Mercury 40–140 hp propeller for a 4 1/4-inch gearcase; OULEME's 13 1/4 x 17 model lists that range.
This is for Mercury or MerCruiser Alpha One owners whose engine and 4 3/4-inch gearcase match the listed higher-horsepower applications. Confirm the model-year notes and dimensions against your drive; this is not the listed 40–140 hp setup.
Full product details
| Brand | OULEME |
|---|---|
| Color | Black |
| Included Components | propeller |
| Manufacturer | OULEME |
| Manufacturer Warranty Description | 1 Year |
| Material | Aluminum |
Listed on Amazon as: Aluminum Boat Propeller, 14 1/4 x 21, 14 1/2 x 19, 15 1/4 x 15, for Mercury/Mercruiser Alpha One Outboard 135-300 HP Motors, 15 Tooth Spline, 3-Blade, RH
View on AmazonWhy it ranks #7: Its aluminum propeller targets BRP Johnson and Evinrude 40–75 HP engines and specifies a 13-spline fit, serving a different engine family.
A 13-spline fit for BRP Johnson Evinrude applications sets this JSPROP propeller apart for owners of those outboards. Its 12 1/4-inch diameter and 15-inch pitch pair with a stated 40–75 hp range, while aluminum alloy and a patented anti-corrosion coating address material and surface protection.
The listed BRP Johnson Evinrude 40–75 hp fit and 13-spline specification give buyers two key application details to compare before installation; the manufacturer also confirms 60 hp compatibility. At 12 1/4 x 15, the stated dimensions make the propeller configuration clear. Aluminum alloy provides the listed construction material, and the patented anti-corrosion coating is described as supporting long service life. The listing says the package includes a propeller, rather than naming a hub kit.
- Listed for BRP Johnson Evinrude 40–75 hp
- 13-spline configuration specified
- 12 1/4-inch diameter and 15-inch pitch
- Aluminum alloy with patented anti-corrosion coating
- Only a propeller is listed as included; a hub kit is not specified.
Skip it if you need an included hub kit; Qiclear's Mercury 40–140 hp propeller explicitly includes a Flo-Torq II hub kit.
This is for BRP Johnson Evinrude owners whose motor matches the listed 40–75 hp and 13-spline application, including the stated 60 hp fit. Check those details before installation; the supplied contents name the propeller only.
Full product details
| Brand | JSPROP |
|---|---|
| Color | black |
| Included Components | a propeller |
| Item Package Dimensions L x W x H | 12.4 x 12.13 x 6.14 inches |
| Manufacturer | JSPROP |
| Material | Aluminum |
| Model | Boat Propeller Fit BRP Johnson Evinrude OMC Stern Drive 40-75 HP |
| Package Weight | 2.02 kg |
| Size | Standard |
| Warranty Description | 90 Day |
Listed on Amazon as: 12 1/4×15 Boat Propeller for BRP Johnson Evinrude 40-75HP 13 Spline
View on Amazon
#8
8. VIF 10 3/8 x 13 Propeller
- Material: Aluminum
- Weight: 3.7 lb
- Material Type: Aluminum
Best for: Small Mercury saltwater backup.
Why it ranks #8: This aluminum propeller is a smaller-engine option for Mercury 9.9–25 HP applications and specifies a 10-spline design.
A 10 3/8-inch diameter and 13-inch pitch identify this VIF aluminum propeller as a smaller-outboard option, with the title listing Mercury 9.9–25 hp applications. The product information also recommends it for salt water, making it a possible replacement or spare for owners in that stated engine range.
The 10-spline configuration is part of the title, while the 9.9–25 hp Mercury range gives owners a horsepower boundary to compare with their motor. Aluminum construction and the stated salt-water recommendation are useful selection details for a marine replacement. VIF also presents the propeller as a potential backup, which may suit an owner planning to keep a spare on hand. Diameter and pitch are specified, but the supplied details do not list an included hub kit.
- 10 3/8-inch diameter and 13-inch pitch specified
- 10-spline configuration named in title
- Listed for Mercury 9.9–25 hp
- Aluminum construction with salt-water recommendation
- The supplied details do not identify an included hub kit.
Skip it if you need a propeller with a named included hub kit; the Quicksilver BlackMax includes a Flo-Torq II Hub Kit.
This suits a Mercury 9.9–25 hp owner seeking an aluminum propeller with a stated salt-water recommendation, or a spare for that application. Its title supplies diameter, pitch, and spline count, but not hub-kit details.
Full product details
| Brand | VIF |
|---|---|
| Color | Black |
| Item Weight | 3.7 pounds |
| Manufacturer | Jason Marine |
| Part Number | 48-19640A40 |
| Material | Aluminum |
| Model Number | boat propeller |
| Operation Mode | Manual |
| Recommended Uses | For Salt Water |
Listed on Amazon as: VIF 10 3/8 x 13 10 Spline Boat Propeller 48-19640A40 for Mercury 9.9-25hp
View on Amazon
#9
9. MOPFOL Hangkai 3.5 HP Propeller
- Material: Aluminum
- Weight: 10.56 oz
- Material Type: Aluminum
Best for: Hangkai 3.5 hp direct replacement.
Why it ranks #9: Its CNC-machined aluminum propeller is specifically described as a direct replacement for Hangkai 3.5 HP motors, so its stated fit is narrow.
Specific compatibility with Hangkai 3.5 hp outboards is the defining feature of this MOPFOL aluminum propeller, which is described as a direct replacement requiring no modifications. Its three-blade design and CNC-machined aluminum construction provide clear points for owners comparing a replacement for an old or broken propeller.
The Hangkai 3.5 hp fit is explicitly identified, and the listing describes installation as direct replacement without modifications, which can simplify replacement planning for that motor. Three blades are stated to maximize thrust efficiency and fuel economy while providing smooth acceleration and stable operation. CNC-machined aluminum alloy is presented as durable in marine environments, and the lightweight, portable description supports carrying it as a replacement. The supplied information does not list diameter or pitch.
- Specifically compatible with Hangkai 3.5 hp
- Described as a direct replacement without modifications
- Three-blade configuration
- CNC-machined aluminum alloy construction
- Diameter and pitch are not specified in the supplied details.
Skip it if you need stated diameter and pitch dimensions; NovelBee's small-engine propeller lists both measurements.
Choose this for a Hangkai 3.5 hp owner replacing an old or broken propeller who values a stated direct-replacement fit and CNC aluminum construction. The supplied details omit diameter and pitch, so those dimensions are a boundary to consider.
Full product details
| Brand | MOPFOL |
|---|---|
| Color | White |
| Included Components | Propellers |
| Item Weight | 10.56 ounces |
| Manufacturer | MOPFOL |
| Part Number | PHYRD1E55/PH06-JW |
| Manufacturer Warranty Description | No |
| Material | Aluminum |
| Model Number | b913-20a01 |
| Recommended Uses | Marine Boating |
Listed on Amazon as: Hangkai 3.5HP Aluminum Propeller 3 Blades 7 1/4 5-A CNC Machined Durable Design Direct Replacement Outboard Motor Propeller for Marine Boating
View on Amazon
#10
10. NovelBee Tohatsu Drill Propeller
- Material: Nylon
- Weight: 0.3 kg
- Material Type: Nylon
Best for: Small Tohatsu drill-propeller users.
Why it ranks #10: This three-blade nylon drill propeller is a specialized small-motor option for listed Tohatsu, Nissan and Mercury 2.5–3.5 HP applications.
Its drill-propeller format and lightweight nylon construction distinguish this NovelBee model from conventional aluminum outboard replacements. The 7.4-inch diameter and 5.7-inch pitch are specified, and the listing names Tohatsu 3.5 hp as well as Nissan and Mercury small-engine applications, with further model-year notes for certain drives.
The three-blade nylon propeller is specified for right-hand rotation, with a 7.4-inch diameter and 5.7-inch pitch. Those details let buyers compare its format and dimensions with the small motor or drill-propeller application they have. The listing names Tohatsu 3.5 hp and Nissan and Mercury 3.5 hp uses, while additional notes refer to 2002-and-earlier NS2.5A transmission and drive-shaft applications. The named model variations make checking the exact small-engine fit important.
- Nylon construction
- Three blades and right-hand rotation specified
- 7.4-inch diameter and 5.7-inch pitch
- Named for Tohatsu 3.5 hp and other small-engine applications
- The listed application is limited to small engines, not the larger horsepower ranges.
Skip it if you need a 40–75 hp propeller; JSPROP's BRP Johnson Evinrude model lists that range.
This suits an owner seeking a nylon drill propeller for the listed small Tohatsu, Nissan, or Mercury applications. Its dimensions and model-year notes are specific, so match the exact motor and drive application rather than treating it as a general outboard replacement.
Full product details
| Brand | NovelBee |
|---|---|
| Color | Black |
| Item Weight | 0.3 kg |
| Manufacturer | Shanghai yuewen gaoyuan trading co.,LTD |
| Material | Nylon |
| Recommended Uses | boating, fishing, water sports, transportation on small water bodies |
Listed on Amazon as: Novelbee 7.4 X 5.7 Boat Drill Propeller F6 for Tohatsu Outboard Motor 3.3Hp
View on AmazonAvoid confusing engine fit with propeller fit
A horsepower range alone does not prove that a propeller will fit your outboard. These listings show why: the Quicksilver BlackMax specifies Mercury and Mariner 40–60 HP BigFoot/Command Thrust applications and 75–125 HP outboards, while the OULEME 13 1/4 x 17 Propeller specifies a 15-tooth spline and a 4-1/4-inch gearcase. The JSPROP 12 1/4 x 15 Propeller is for a different engine family, BRP Johnson and Evinrude, and specifies 13 splines.
Before ordering, compare the engine make and model, gearcase, shaft spline count, rotation and the existing propeller’s stamped dimensions against the listing. Even products sharing a part number or nominal pitch can have different fit requirements.
When any of those details are unclear, confirm fit with the engine or propeller manufacturer rather than relying on horsepower alone.
Know what a hub kit does—and does not establish
An included hub kit can be useful, but its presence does not independently confirm that the propeller fits your engine. The Quicksilver BlackMax lists a Flo-Torq II Hub Kit 835257K1 and describes it as helping protect the drivetrain from most minor damage-causing impacts. The Qiclear 13 1/4 x 17 Propeller also lists an included Flo-Torq II kit, identified as 835257Q1.
Those are concrete inclusion details, not proof that either kit suits every engine covered by a broad horsepower range. Check the precise hub-kit number, spline and engine application against your motor.
A propeller without a listed hub kit, such as the OULEME 13 1/4 x 17 Propeller, may need separate hub verification. Treat the propeller and its hub as a compatibility system; do not assume that a matching diameter and pitch settles the question.
How to Choose an Outboard Propeller
Engine make and horsepower
Start by matching the propeller’s stated engine make and horsepower range to your exact motor. The products span small applications such as the NovelBee Tohatsu Drill Propeller for listed 2.5–3.5 HP motors and the VIF 10 3/8 x 13 Propeller for Mercury 9.9–25 HP, through the Quicksilver BlackMax Propeller for specified Mercury and Mariner engines and the OULEME 14 1/2 x 19 Propeller for Mercury 135–300 HP. Buyers of small portable outboards should focus on the narrow, specifically listed fit; higher-horsepower Mercury owners should compare the applicable OULEME range.
Do not choose from horsepower alone: engine series, year, gearcase and other fit details can limit compatibility even when the number appears to fall within a listed range.
Diameter and pitch
Compare the diameter and pitch stamped on your current propeller with the listed dimensions before selecting a replacement. The mainstream Mercury choices here include 13 1/4 x 17 models from Quicksilver, Qiclear and OULEME; the CAPTAIN propeller is 13 x 19, while the VIF is 10 3/8 x The product set also includes a 12 1/4 x 15 JSPROP and a 14 1/2 x 19 OULEME for different applications.
Those measurements distinguish products, but the listings do not establish the best pitch for a particular boat, load or operating goal. Buyers replacing an existing propeller should verify its specifications and engine fit.
Anyone changing pitch should consult their engine guidance or a qualified propeller supplier rather than assuming a different number will improve performance.
Material and blade configuration
Choose a material and blade arrangement that match your intended application and verified fit. Most listed options are aluminum: examples include the Quicksilver BlackMax Propeller, JSPROP 12 1/4 x 15 Propeller and VIF 10 3/8 x 13 Propeller. The CAPTAIN 13 x 19 Propeller stands apart as a four-blade stainless-steel option, while the NovelBee Tohatsu Drill Propeller uses nylon and is described as a small-motor drill propeller.
The listings do not provide a like-for-like performance comparison between these materials or blade counts. Buyers seeking the stated four-blade stainless configuration can examine CAPTAIN, provided its Mercury or Force fit matches.
For the specialized drill-propeller use, consider NovelBee only for its stated small-motor applications; other buyers should prioritize a conventional propeller listing for their engine.
Which Outboard Propeller Should You Choose?
For a matching Mercury or Mariner application in its stated range, choose the Quicksilver BlackMax Propeller first: it combines a 13 1/4 x 17P aluminum propeller with a specified Flo-Torq II hub kit. If you need a Mercury 40–140 HP option with a listed 15-tooth spline, compare the OULEME 13 1/4 x 17 Propeller; if a hub kit is important, consider the Qiclear 13 1/4 x 17 Propeller, which lists one. Mercury owners seeking a four-blade stainless-steel design can check the CAPTAIN 13 x 19 Propeller’s fit.
For Mercury 135–300 HP applications, examine the OULEME 14 1/2 x 19 Propeller. BRP Johnson and Evinrude owners should check the JSPROP 12 1/4 x 15 Propeller, while small-motor buyers should compare VIF, MOPFOL or NovelBee only against their exact engine application.
Related Buying Guides
- Best Outboard Motor Cover
- Best Electric Outboard Motors
- Best Paint For Outboard Motor
- Best Portable Outboard Motor
- Best Trolling Motor For Outboard
Frequently Asked Questions
How do I confirm the correct propeller diameter and pitch for my boat and engine?
Match the diameter and pitch to the current propeller or the engine and boat manufacturer’s guidance, then confirm the replacement’s stated fit range. Check the exact engine model and horsepower rather than relying on a broad title range. If the current propeller’s markings are unclear, verify the specification with an authorized dealer before ordering.
How can I verify spline count, rotation and gearcase compatibility before ordering?
Check the engine’s exact model and gearcase, then compare them with the propeller listing’s fit details, spline count and rotation. Do not assume that a shared diameter, pitch or horsepower range ensures compatibility. Confirm hub requirements as well; when listing details do not settle a fit question, ask a qualified dealer before ordering.
When should I choose a stainless-steel or four-blade propeller instead of aluminum?
Choose by matching the material and blade configuration to your application and verified engine fit, not by assuming one design suits every boat. This selection includes a four-blade stainless-steel option for specified Mercury applications, while several alternatives are aluminum. Confirm the precise engine, gearcase and propeller requirements before substituting materials or blade counts.
What should I check about the hub kit before buying?
Confirm whether the propeller includes a hub kit and whether that kit matches your engine’s requirements. The Quicksilver BlackMax listing specifies an included Flo-Torq II Hub Kit, described as helping protect the drivetrain from most minor impact damage; the Qiclear listing also lists a hub kit. Verify the exact hub fit before ordering.
What should small-motor owners verify before choosing a propeller?
Match the propeller to the exact small-motor make, model and horsepower, and verify diameter, pitch, spline count and hub compatibility. The VIF, NovelBee and Hangkai titles describe different small-motor applications, so their listed sizes and engine references are not interchangeable. Check the engine’s requirements before selecting any of them.
Final Words
For a Mercury or Mariner engine that matches the stated range, start with the Quicksilver BlackMax: its 131⁄4 x 17P aluminum propeller includes a specified Flo-Torq II hub kit. Compare alternatives only when their listed engine fit and features suit your application: the OULEME 131⁄4 x 17 lists a 15-tooth spline, and CAPTAIN offers a four-blade stainless-steel design. For BRP or small-motor applications, verify the exact engine and hub requirements before choosing.




