Best Rear Lights For Trucks: Compare 10 Replacement and Tailgate Options

Best Rear Lights For Trucks

A strong rear light for a truck should match the mounting style and functions you need, whether you are replacing a combination lamp or adding a tailgate bar. EAGLE KING PRODUCTS HTL-T101 is the most truck-focused choice here: it is described as a 12V, 3-stud replacement with stop, tail, turn, backup and license-plate functions, plus DOT and SAE compliance. Other options include 38-LED stud-mounted lamps, 6-inch oval lights, and 60-inch bars with signal functions.

Those formats are not interchangeable, so check the existing lamp shape, mounting holes, wiring and vehicle voltage before choosing. This roundup compares the listed specifications and product descriptions; confirm fitment and required adapters with your vehicle and the seller before installation.

EAGLE KING PRODUCTS HTL-T101 leads as the best rear light for trucks when you need a conventional combination-lamp replacement. Its listed 12V, 3-stud format is aimed at commercial trucks and trailers, and it combines stop, tail, turn, backup and license-plate lighting. The description also states DOT and SAE compliance.

Confirm the mounting-hole spacing before ordering, since the product specifically calls for checking it. For a surface-mounted universal option instead, consider Partsam 38 LED Universal Tail Lights.

Our Top Picks

EAGLE KING HTL-T101Best Overall

EAGLE KING HTL-T101

Its 12V, 3-stud design targets heavy-duty trucks, with five functions and stated DOT and SAE compliance for road use.

View on Amazon
Partsam 38 LED Universal Tail LightsMost Functions

Partsam 38 LED Universal Tail Lights

Each 12V lamp combines 16 red stop, turn and tail LEDs, 18 white reverse LEDs and four white license-plate LEDs.

View on Amazon
MAXXHAUL 80685Durable Housing

MAXXHAUL 80685

The two square 12V combination lights use a sonic-welded ABS housing, PMMA lens and stainless-steel front screws.

View on Amazon

Compare Truck Rear Light Options

#ProductLens MaterialVoltageCompatible with Vehicle TypeBuy
1Plastic—TruckView on Amazon
2Polycarbonate12 VUniversal for 12v vehicles like truck…View on Amazon
3
MAXXHAUL 806853. MAXXHAUL 80685Durable Housing
Acrylic12 VRV, Trailer, Truck, Vans, SUV Boat, FlatbedView on Amazon
4Polycarbonate12 V DCBoat, Car, Trailer, TruckView on Amazon
5
Partsam 16 LED Universal Lights5. Partsam 16 LED Universal LightsDIY 12V combination-light buyers
Polycarbonate12 VUniversal fit for most 12V vehicles like…View on Amazon
6
Nilight TL-44 Trailer Kit6. Nilight TL-44 Trailer KitTrailer kit with amber turns
Polycarbonate30 VTruckView on Amazon
7—12 VCar, Golf Cart, TruckView on Amazon
8
OPT7 Redline Light Bar8. OPT7 Redline Light BarTailgate-width signal bar buyers
——TruckView on Amazon
9
WUSHIXAN Round Trailer Lights9. WUSHIXAN Round Trailer LightsBracket-mounted round-light buyers
Plastic24 VCar, Trailer, TruckView on Amazon
10
Rdxcv 59-Inch Light Bar10. Rdxcv 59-Inch Light BarTriple-row tailgate signal strip
——TruckView on Amazon

Detailed Reviews: Best Rear Lights For Trucks

EAGLE KING HTL-T101

#1 · Best Overall

1. EAGLE KING HTL-T101

  • Lens Material: Plastic
  • Compatible with Vehicle Type: Truck

Best for: Three-stud commercial truck fit.

Why it ranks #1: Its 12V, 3-stud design targets heavy-duty trucks, with five functions and stated DOT and SAE compliance for road use.

DOT and SAE compliance to U.S. FMVSS 108 distinguishes this red-and-clear combination lamp for road-use applications. Its five functions—stop, tail, turn, backup, and license-plate lighting—bring multiple signals together, while the three-stud mount targets trucks and trailers already using that mounting style.

The three-stud mounting arrangement is specified for many heavy-duty trucks, semi-trailers, and commercial vehicles, making the mounting pattern a key fit consideration. Stop, tail, turn, backup, and license-plate functions are combined in one unit, reducing the need to source separate lamps for those listed roles. The red-and-clear dual lens supports the stated visibility purpose, and the product is described as waterproof. Verify the vehicle’s mounting-hole spacing before selecting it.

Pros
  • DOT and SAE compliant to U.S. FMVSS 108
  • Combines five listed lighting functions
  • Three-stud mounting for compatible heavy-duty vehicles
  • Waterproof listing; bulbs and wire are included
Cons
  • The three-stud mount requires matching hole spacing.

Skip it if you have a different mounting pattern; the Partsam 16 LED square lamp uses rear studs for flat-surface mounting instead.

A fit for commercial-truck or trailer owners whose existing mount uses three studs and who want five functions in one DOT- and SAE-compliant lamp. Its mounting-hole spacing remains the deciding compatibility check.

Full product details
BrandEAGLE KING PRODUCTS
ColorRED
Compatible with Vehicle TypeTruck
Included ComponentsBULBS, WIRE,
Item Dimensions7 x 7 x 6 inches
Dimensions7 x 7 x 6 inches
Lens ColorRED
Lens MaterialPlastic
ManufacturerEAGLE KING PRODUCTS
Part NumberHTL-T101
Manufacturer Warranty Description30 DAYS RETURN POLICY
Model NumberHTL-T101
Special FeatureWaterproof

Listed on Amazon as: 2PC Universal Truck/Trailer Tail Lights – DOT Approved Red & Clear Stop/Tail/Turn Signal Lights (Model HTL-T101) – 12V, 3-Stud Mount, Easy Installation

View on Amazon
Partsam 38 LED Universal Tail Lights

#2 · Most Functions

2. Partsam 38 LED Universal Tail Lights

  • Lens Material: Polycarbonate
  • Voltage: 12 V
  • Compatible with Vehicle Type: Universal for 12v vehicles like truck…

Best for: Stud-mounted 38-LED pair.

Why it ranks #2: Each 12V lamp combines 16 red stop, turn and tail LEDs, 18 white reverse LEDs and four white license-plate LEDs.

Each lamp uses 38 LEDs divided into 16 red signal LEDs, 18 white reverse LEDs, and four white license-plate LEDs. That mix lets a 12V truck or trailer owner combine several rear-light functions in a pair of square stud-mounted assemblies.

The red LEDs cover stop, turn, and tail functions; white LEDs provide reverse lighting, with four more assigned to license-plate illumination. The product notes that only one side has license-plate lights, an important detail when planning the pair’s orientation. Rear studs attach to flat surfaces, but wiring splices are required. These are not direct Wrangler YJ or CJ replacements and may need modification, despite the listing’s compatibility with various 12V vehicles.

Pros
  • 38 LEDs per lamp across signal, reverse, and plate functions
  • 16 red LEDs handle stop, turn, and tail
  • Rear studs suit flat-surface mounting
  • Waterproof listing for 12V vehicle applications
Cons
  • Only one side has license-plate lights, and wiring splicing is required.

Skip it if you need license-plate illumination on both sides or a plug-in connection; Partsam’s 16 LED lamp also requires splicing, so choose another format.

A fit for 12V truck, trailer, boat, or RV owners who can use stud mounting and wire splices. Account for the single-sided license-plate lighting and possible Wrangler modifications before selecting the pair.

Full product details
BrandPartsam
ColorRed Lens
Compatible with Vehicle TypeUniversal for 12v vehicles like truck, trailer, boat, bus, lorry, van, caravan, also suitable for wrangler yj/tj, etc
Included Components2x Universal Square 12V Combination 38 LED Signal Tail Lights
Item Weight16 ounces
Lens ColorRed Lens
Lens MaterialPolycarbonate
ManufacturerPartsam
Part NumberGTCV-0977742255
Manufacturer Warranty Description1 Year Warranty
Model Number13
Special FeatureRed Rear Combination LED Tail Light w/ Backup Light and License Plate Light – Driver Side, Universal Red Combination LED Tail Light w/ Backup Light – Passenger Side See more
Voltage12 volts
Wattage10.56 watts

Listed on Amazon as: Partsam Pair 38 LED Universal Tail Brake Turn Stop License Back up Reverse Lights Rear Combination for Wrangler YJ TJ CJ Truck Trailer Boat RV,12V Stud Mounted Lamps Waterproof,Pack of 2

View on Amazon
MAXXHAUL 80685

#3 · Durable Housing

3. MAXXHAUL 80685

  • Lens Material: Acrylic
  • Voltage: 12 V
  • Compatible with Vehicle Type: RV, Trailer, Truck, Vans, SUV Boat, Flatbed

Best for: Multi-vehicle 38-LED pair.

Why it ranks #3: The two square 12V combination lights use a sonic-welded ABS housing, PMMA lens and stainless-steel front screws.

Thirty-eight LEDs per lamp divide illumination among red stop, turn, and tail signals, white reverse lighting, and white license-plate illumination. That combination gives truck, trailer, RV, van, boat, flatbed, and other listed vehicle owners multiple rear-light functions in a square 12V assembly.

The 16 red LEDs serve stop, turn, and tail functions, while 18 white LEDs handle reverse lighting and four white LEDs illuminate the license plate. That allocation makes the pair useful where those functions are wanted in one assembly. PMMA lenses are described as clear and UV-resistant, and the sonic-welded ABS housing plus stainless-steel front screws address durability and corrosion resistance. The stated vehicle range is broad, but the listing identifies this as a universal combination light rather than a vehicle-specific lamp.

Pros
  • 38 LEDs per lamp across three function groups
  • White LEDs provide reverse and license-plate illumination
  • PMMA lens is described as clear and UV-resistant
  • Sonic-welded ABS housing and stainless-steel front screws
Cons
  • The product information carries a California Proposition 65 chemical-exposure warning.

Skip it if you need a tailgate-width strip rather than square lamps; the Nilight TR-101-A is a 60-inch light bar.

Consider this pair if your truck, trailer, boat, or RV needs red signaling plus reverse and license-plate illumination in square lamps. Check that this combination-light format suits your mounting setup before choosing it.

Full product details
BrandMAXXHAUL
ColorRed Lens
Compatible with Vehicle TypeRV, Trailer, Truck, Vans, SUV Boat, Flatbed
Included ComponentsOne 2-pack Universal Square 12V Combination 38 LED Signal Tail Light
Item Weight2 pounds
Lens ColorRed
Lens MaterialAcrylic
ManufacturerMaxxhaul Towing Products
Part Number80685
Manufacturer Warranty DescriptionPlease contact seller for manufacturer's warranty
Model Number80685
Model Year80685
Special FeatureDustproof
Voltage12 volts
Wattage3 watts
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including acrylonitrile which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Listed on Amazon as: MAXXHAUL 80685 Universal Square 12V Combination 28 LED Signal Tail Light – For Truck Trailer Boat Jeep SUV RV Vans Flatbed 2 Pack

View on Amazon
RUNHWEE 6-Inch Oval Lights

#4 · Oval Mount Option

4. RUNHWEE 6-Inch Oval Lights

  • Lens Material: Polycarbonate
  • Voltage: 12 V DC
  • Compatible with Vehicle Type: Boat, Car, Trailer, Truck

Best for: Six-inch oval 12V trailer lights.

Why it ranks #4: These 12V, 6-inch oval lamps combine stop, turn, tail and parking functions, with a rubber grommet and standard 3-prong plug.

A six-inch oval format pairs 10 red LEDs with stop, turn, tail, parking, and brake functions, giving truck and trailer owners a compact multifunction lamp. The kit includes a surface-mount grommet and standard three-prong plug, supporting a defined mounting and connection workflow.

The 10 LEDs combine the listed parking, turn, tail, and brake roles, while the 12V DC specification targets compatible vehicle electrical systems. A black rubber grommet supports surface mounting, and the standard three-prong plug provides a stated connection format. The lights are described as IP67 waterproof and resistant to dust, sand, rain, and snow. DOT compliance is also listed. Confirm that the oval size, grommet mounting, and plug format suit the installation at hand.

Pros
  • Six-inch oval lamp format
  • 10 LEDs for listed rear-light functions
  • Surface-mount grommet and standard three-prong plug
  • IP67 waterproof and DOT compliant
Cons
  • The listed functions do not include reverse lighting.

Skip it if you need a reverse-light function in the same assembly; the MAXXHAUL 80685 includes white reverse LEDs.

A suitable option for truck, RV, boat, or trailer owners needing oval 12V stop, turn, tail, parking, and brake lighting. Choose it when the grommet and three-prong plug match your installation; it does not list reverse lighting.

Full product details
BrandRUNHWEE
ColorRED
Compatible with Vehicle TypeBoat, Car, Trailer, Truck
Included ComponentsTail Lights
Lens ColorRed
Lens MaterialPolycarbonate
ManufacturerRUNHWEE
Part NumberWD010
Manufacturer Warranty Description2 Years Warranty
Model NumberWD010
Model Year1990
Special FeatureWaterproof
Voltage12 volts_of_direct_current

Listed on Amazon as: 6" Oval LED Trailer Lights Kit, 2PCS Waterproof Stop/Turn/Brake Tail Lights with 10 LED Markers for Truck, RV, Boat, Trailer (Red) DOT Compliant

View on Amazon
Partsam 16 LED Universal Lights

#5

5. Partsam 16 LED Universal Lights

  • Lens Material: Polycarbonate
  • Voltage: 12 V
  • Compatible with Vehicle Type: Universal fit for most 12V vehicles like…

Best for: DIY 12V combination-light buyers.

Why it ranks #5: The 12V pair covers stop, turn, tail and backup functions, but rear studs and required wire splicing mean it is not a simple plug-in replacement.

Sixteen LEDs divide the work between 12 red stop, turn, and tail lights and four white backup lights, giving truck and trailer owners several rear-light functions in one square unit. Rear studs support flat-surface mounting, while the universal 12V listing covers a broad range of vehicle types.

The red-and-white lens combines stop, turn, tail, backup, and reflector functions, so one pair can cover several rear-light roles on a compatible 12V truck or trailer. Rear studs allow flat-surface mounting, but wiring requires splicing, so installation involves joining wires rather than simply plugging in a connector. These are not direct Wrangler YJ, CJ, or JK replacements; the listing says modifications may be needed. The license-plate light is not included.

Pros
  • 16 LEDs: 12 red for stop, turn, and tail functions
  • Four white LEDs provide backup lighting
  • Rear studs support flat-surface mounting
  • Waterproof listing and broad 12V vehicle compatibility
Cons
  • Splicing is required, and Wrangler installations may need modifications.

Skip it if you need a plug-in installation or a direct Wrangler replacement; the listed rear studs still require wiring splices.

A practical match for truck or trailer owners seeking several rear-light functions in one 12V square assembly. Choose it if you can splice wiring and mount studs on a flat surface; Wrangler owners should account for possible modifications.

Full product details
BrandPartsam
ColorRed Lens
Compatible with Vehicle TypeUniversal fit for most 12V vehicles like Car,Jeep, Ford, trailers, trucks, SUVs, RVs, caravan,vans, boats,Truck, Trailer, Jeep JK CJ YJ,etc.
Item Weight1.2 pounds
Lens ColorClear
Lens MaterialPolycarbonate
ManufacturerPartsam
Part Number‎GTCV-0935543268
Manufacturer Warranty Description1 year for quality issue
Model NumberPartsam-131703
Special FeatureWaterproof
Voltage12 volts
Wattage5 watts

Listed on Amazon as: Partsam 2x Universal 16 LED Stop Tail Turn Signal Backup Reverse Brake Clearance Marker Lights Lamps Red/White Replacement for Jeep YJ JK CJ Truck Trailer Waterproof 12V

View on Amazon
Nilight TL-44 Trailer Kit

#6

6. Nilight TL-44 Trailer Kit

  • Lens Material: Polycarbonate
  • Voltage: 30 V
  • Compatible with Vehicle Type: Truck

Best for: Trailer kit with amber turns.

Why it ranks #6: This two-light kit provides 40 LEDs per lamp for red running and brake lights, amber turns and white reverse lighting.

Each lamp’s 40 LEDs provide red running and brake lighting, amber turn signals, and white reverse lighting, giving trailer owners distinct signal colors in a two-light kit. A clear polycarbonate lens and sturdy iron frame are specified alongside protection from water, dust, and sand.

Separate red, amber, and white outputs make running/brake, turn, and reverse signals distinguishable in the listed trailer-light application. The clear polycarbonate lens displays the lighting, while the description says it isolates water, dust, and sand; an iron outer frame adds a protective structural element. The kit includes two lights and a wiring manual. Its stated voltage specification is 30 volts, so check the vehicle electrical system against that figure before selecting this kit.

Pros
  • 40 LEDs in each light
  • Red running/brake, amber turn, and white reverse outputs
  • Clear polycarbonate lens
  • Two lights and a wiring manual included
Cons
  • The listed 30-volt specification may not suit a 12V-only setup.

Skip it if you need a 12V-specific kit; the RUNHWEE WD010 is listed for 12V DC and combines stop, turn, tail, and brake functions.

A possible choice for trailer owners wanting a two-light kit with distinct amber turns and white reverse lamps. Its listed 30-volt specification makes electrical-system compatibility a critical boundary before purchase.

Full product details
BrandNilight
Color2Pcs 40LED Trailer Tail Light
Compatible with Vehicle TypeTruck
Included Components2PCS Trailer Tail Light Kit and one wiring manual
Lens ColorClear
Lens MaterialPolycarbonate
ManufacturerNilight
Part NumberTL-44
Manufacturer Warranty Description2 Years Warranty
Model NumberTL-44
Model Year2010
Special FeatureWaterproof
Voltage30 volts
Wattage19.2 watts

Listed on Amazon as: Nilight Trailer Tail Light Kit Running Brake Turn Signals Reverse lights

View on Amazon
Nilight 60-Inch Light Bar

#7 · Flexible Bar

7. Nilight 60-Inch Light Bar

  • Voltage: 12 V
  • Compatible with Vehicle Type: Car, Golf Cart, Truck

Best for: Flexible 60-inch tailgate bar.

Why it ranks #7: The 60-inch, 108-LED bar is a 12V tailgate option with an IP67-rated housing and adhesive installation described as requiring no drilling.

A 60-inch flexible strip with 108 LEDs adds a broad tailgate-mounted lighting surface without drilling, according to its installation description. Its IP67-sealed housing is specified to resist rain, snow, dirt, and sand, making it a bar-style option for truck owners seeking weather protection.

The 108 LEDs provide the listed brightness advantage over normal chips, while the flexible strip can conform to the tailgate area. No-drilling installation uses an adhesive enhancer to increase hold strength, avoiding a drilled mounting approach. The IP67-sealed housing protects against the listed rain, snow, dirt, and sand exposure. At 12V, it is listed for cars, golf carts, and trucks; the supplied facts identify it as a single-row tailgate light bar.

Pros
  • 60-inch flexible tailgate strip
  • 108 LEDs, stated as 35% brighter than normal chips
  • No-drilling installation with adhesive enhancer
  • IP67-sealed housing resists listed weather and debris
Cons
  • Adhesive mounting means it does not use a drilled fastener installation.

Skip it if you prefer a mechanically fastened light bar; the OPT7 Redline 60-inch bar includes a four-pin adapter and offers a different installation approach.

Choose this for a truck owner seeking a flexible, no-drill 60-inch tailgate strip and the listed IP67 protection. The adhesive installation is central to the fit, so it may not suit buyers who want drilled mounting.

Full product details
BrandNilight
Color60" Tailgate Light Strip Red/White/Amber Single Row
Compatible with Vehicle TypeCar, Golf Cart, Truck
Included ComponentsLED tailgate Lights Bar
Item Dimensions8 x 0.3 x 7 inches
Item Weight3.2 ounces
Dimensions8 x 0.3 x 7 inches
ManufacturerNilight
Part NumberTR-101-A
Manufacturer Warranty Description2 Years Warranty
MaterialPlastic
Model NumberTR-101-A
Recommended UsesVehicle Exterior, Household Decoration
Voltage12 volts

Listed on Amazon as: Nilight 60 Inch Truck Tailgate Light Bar 108 LED Single Row

View on Amazon
OPT7 Redline Light Bar

#8

8. OPT7 Redline Light Bar

  • Compatible with Vehicle Type: Truck

Best for: Tailgate-width signal bar buyers.

Why it ranks #8: Its 60-inch, one-piece bar adds sequential amber turn signals, but some newer trucks require a separately sold hardwire kit or compatible harness.

A 60-inch, one-piece format places a light bar across the tailgate, with sequential amber turn signals as its defining signal feature. It suits truck owners seeking a bar-style rear-light solution rather than separate square combination lamps, but installation depends on the correct OPT7 connection method.

The included four-pin Plug N Play adapter supports the listed plug-in installation approach, while the product information also identifies an Easy Connect Harness for certain Silverado applications. Newer trucks with factory trailer tow packages or towing sensors require the separately sold OPT7 Hardwire Kit. The hardwire setup is specified for certain F- and RAM-series trucks and 2015–2018 Silverado/Sierra models; the listing explicitly says not to hardwire 2019-and-newer Silverado/Sierra trucks.

Pros
  • 60-inch, one-piece tailgate light bar
  • Sequential amber turn-signal feature
  • Four-pin Plug N Play adapter included
  • Hardwire guidance specifies several truck applications
Cons
  • Some newer trucks require a separately sold OPT7 Hardwire Kit.

Skip it if you need all installation hardware included for a newer tow-package truck; the required OPT7 Hardwire Kit is sold separately.

A candidate for pickup owners wanting a 60-inch tailgate bar with sequential amber turns. Match the truck and connection method to OPT7’s listed guidance, especially if factory towing equipment or sensors affect installation.

Full product details
BrandOPT7
ColorAmber
Compatible with Vehicle TypeTruck
Included ComponentsLED Light Bar, 4-pin Plug N Play Adapter
Item Dimensions60 x 1 x 0.5 inches
Item Weight2 ounces
Dimensions60 x 1 x 0.5 inches
ManufacturerOPT7
Part Number900-00403
Manufacturer Warranty Description1 Year Warranty: If any of the LED lights fail during normal use during the first year from date of purchase, OPT7 will repair or replace the unit free of charge as long as the unit is shipped back to us for repair. Buyer is responsible for return shipping costs
MaterialAluminum
Model Number900-00403
Recommended UsesVehicle Exterior

Listed on Amazon as: OPT7 Redline 60" 1-Piece Tailgate Light Bar, Sequential Amber Turn Signal

View on Amazon
WUSHIXAN Round Trailer Lights

#9

9. WUSHIXAN Round Trailer Lights

  • Lens Material: Plastic
  • Voltage: 24 V
  • Compatible with Vehicle Type: Car, Trailer, Truck

Best for: Bracket-mounted round-light buyers.

Why it ranks #9: The two round lights have iron bracket bases and are listed for 12V–24V use, though the supplied details give limited function and fitment specifics.

An iron bracket base distinguishes this pair of round LED truck and trailer lights, providing a bracket-style mounting option rather than a square stud-mounted assembly. The product is listed for 12V–24V applications and for turn, signal, and running-lamp use across trucks, RVs, campers, and trailers.

The iron bracket base gives buyers a defined mounting component for positioning the round lights on a compatible vehicle, while the stated 12V–24V range covers more than one system voltage. The listing identifies turn, signal, and running-lamp use, so these are intended for several rear-light roles. Plastic lenses and a waterproof feature are also specified. The supplied information does not give LED count or detailed wiring instructions, so those details cannot be used to assess output or installation steps.

Pros
  • Pair of round LED lights with iron bracket bases
  • Listed 12V–24V voltage range
  • Turn, signal, and running-lamp functions listed
  • Waterproof feature specified
Cons
  • The supplied product details do not specify LED count or wiring instructions.

Skip it if you need detailed LED-output and wiring information before choosing; the Nilight TL-44 lists 40 LEDs per light and includes a wiring manual.

Consider these for truck, RV, camper, or trailer owners seeking round lamps with iron bracket bases and a stated 12V–24V range. The limited supplied installation and output details may not satisfy buyers needing those specifics.

Full product details
BrandWUSHIXAN
ColorBlack
Compatible with Vehicle TypeCar, Trailer, Truck
Lens ColorRed
Lens MaterialPlastic
ManufacturerWUSHIXAN
Part NumberDHL-F003
Model Year2024
Special FeatureWaterproof
Voltage24 volts
Wattage12.6 watts

Listed on Amazon as: 2 PCS LED Truck Trailer Tail Lights with Iron Bracket Base,12V-24V Round Led Trailer Tail Lights for Turn/Signal/Running Lamps Fits any Truck RV Camper Trailer

View on Amazon
Rdxcv 59-Inch Light Bar

#10

10. Rdxcv 59-Inch Light Bar

  • Compatible with Vehicle Type: Truck

Best for: Triple-row tailgate signal strip.

Why it ranks #10: This flexible 59-inch bar lists brake, reverse and turn signals for trucks, but provides fewer installation and compatibility details than other bar options.

The 59-inch triple-row LED strip combines brake, reverse, and turning signals in a tailgate-width format, adding several rear signals along the truck’s rear edge. Its flexible PVC housing is described as waterproof and wear-resistant, supporting use on trucks, trailers, and RVs.

The 12V LED chips transmit brake, turn, and reverse signals, allowing nearby vehicles to see the listed changes from the tailgate area. A 59-inch length spans a broad rear section, while the flexible PVC housing is described as wear-resistant and resistant to cracking during prolonged use. The listing gives universal fit and includes one light bar. It does not provide specific mounting or wiring details in the supplied facts, so installation planning should account for that information gap.

Pros
  • 59-inch triple-row format
  • Brake, turn, and reverse signals in one strip
  • Flexible PVC housing described as wear-resistant
  • Waterproof feature and 12V operation listed
Cons
  • The supplied details do not specify a mounting method or wiring connector.

Skip it if you need a stated plug-in connector or mounting method; the Nilight TR-101-A specifies no-drill adhesive installation.

A match for truck, trailer, or RV owners seeking a 59-inch flexible strip with brake, turn, and reverse signals. The supplied facts leave mounting and connector details unspecified, so those installation requirements may determine fit.

Full product details
BrandRdxcv
Color59'' Triple Rows
Compatible with Vehicle TypeTruck
Included Components1 Truck Tailgate Light Bar
ManufacturerRdxcv
Part NumberRdxcv-20059CT
Manufacturer Warranty Description0.2
MaterialPolyvinyl Chloride (PVC)
Model NumberTruck Tailgate Light Bar

Listed on Amazon as: 59" Truck Tailgate Light Bar, Triple Row LED Tail Light Strip with Brake Reverse Turning Signals Lights, Waterproof Flexible Rear Lights Strips for Trucks Trailers RVs

View on Amazon

Avoiding mounting and wiring mismatches

The most common fitment trap is choosing by appearance without matching the existing mount and wiring. EAGLE KING HTL-T101 uses a 3-stud mount and specifically advises checking hole spacing, while Partsam 38 LED Universal Tail Lights and MAXXHAUL 80685 have rear studs for flat-surface mounting and require wire splicing. RUNHWEE 6-Inch Oval Lights instead use a surface-mount grommet and standard 3-prong plug.

Those are distinct installation formats, not interchangeable descriptions of a universal fit. Tailgate bars are a separate route: Nilight 60-Inch Light Bar is described as adhesive-mounted without drilling, while OPT7 Redline Light Bar may need a separate hardwire kit on certain newer trucks.

Before buying, compare the current lamp’s dimensions, mounting points and connector, then verify the vehicle-specific wiring instructions. The product data does not establish that any one lamp plugs directly into every truck.

Combination lamps versus tailgate bars

A combination lamp replaces or adds a defined rear lamp, while a tailgate bar spans much of the truck’s tailgate and provides an additional signal location. The combination options here list specific functions: Partsam 38 LED Universal Tail Lights include reverse and license-plate illumination, and EAGLE KING HTL-T101 lists five functions in one unit. Bars serve a different purpose and vary in signal details: Nilight 60-Inch Light Bar lists 108 LEDs, while OPT7 Redline Light Bar specifies sequential amber turns.

A bar’s length alone does not prove it will fit a particular tailgate or work with its towing electronics. OPT7 notes that some trucks with factory tow packages or sensors require an additional hardwire kit, with specific exclusions in its instructions.

Treat a bar as an additional installation decision, not an assumed substitute for legally required factory lamps; check vehicle requirements and product fitment before relying on one.

How to Choose Rear Lights for a Truck

Mounting style and shape

Start by matching the lamp’s mounting style to the opening or surface on your truck. The products range from EAGLE KING HTL-T101’s 3-stud format to the 6-inch oval RUNHWEE lamps with a grommet and 3-prong plug, plus square stud-mounted Partsam and MAXXHAUL options. Tailgate bars span 59 or 60 inches, so they require a different fit check from a replacement lamp.

If you are replacing a factory unit, match the shape, measurements, hole spacing and connector before choosing. A buyer with a compatible 3-stud mount may favour EAGLE KING HTL-T101; someone with an oval opening may prefer RUNHWEE.

Universal wording does not guarantee direct fit: some Partsam lights explicitly require modifications or splicing.

Functions and signal layout

Choose a light that provides the functions required for your intended position and installation. EAGLE KING HTL-T101 lists stop, tail, turn, backup and license-plate lighting; Partsam 38 LED Universal Tail Lights split those roles across 16 red and 22 white LEDs, including four for license illumination. Nilight TL-44 lists red running and brake lights, amber turns and white reverse lighting.

By contrast, the supplied description for RUNHWEE 6-Inch Oval Lights lists parking, turn, tail and brake functions, but not reverse or license illumination. Drivers replacing one multi-function lamp should favour a product whose stated functions match the old unit.

Someone adding a tailgate bar can consider the bar’s stated signals, but should not assume it replaces every required lamp function.

Voltage and installation requirements

Check your vehicle’s electrical system and installation method against the product details before ordering. Several options specify 12V, including Partsam 38 LED Universal Tail Lights, MAXXHAUL 80685 and Nilight 60-Inch Light Bar; WUSHIXAN Round Trailer Lights list a 12V–24V range. Nilight TL-44 lists 30 volts, an unusual figure in this group, so verify suitability with the seller and your vehicle documentation rather than assuming compatibility.

Installation demands also vary: some stud-mounted lamps require splicing, while OPT7 Redline Light Bar says a separate hardwire kit may be necessary on certain trucks. Choose a straightforward replacement only when the wiring and mount match; buyers comfortable with wiring can consider options requiring splicing, after reviewing the supplied instructions.

Which rear lights should I choose for my truck?

For a conventional heavy-duty truck replacement with a matching 3-stud mount, choose EAGLE KING HTL-T101 for its five listed functions and stated DOT and SAE compliance. If you want a multi-function square lamp with specified LED roles, Partsam 38 LED Universal Tail Lights offer reverse and license-plate illumination; MAXXHAUL 80685 is another square option with an ABS housing and PMMA lens. For an oval opening, consider RUNHWEE 6-Inch Oval Lights, after checking the grommet and connector fit.

Choose Nilight 60-Inch Light Bar if you want a long tailgate strip and its adhesive installation suits your truck. OPT7 Redline Light Bar adds sequential amber turns but may need an additional harness.

Verify vehicle-specific fit, wiring and local requirements before installation.

Frequently Asked Questions

How do I identify the mounting style and hole spacing on my truck?

Check the existing lamp and the truck’s opening before ordering. Note whether it uses studs, a bracket, a grommet, or a surface mount, then measure the hole spacing and compare it with the product details. Also check the lamp shape and connector; the HTL-T101 listing specifically advises confirming mounting-hole spacing.

Will an LED tail light work with my truck’s existing wiring and turn-signal system?

It may, but confirm the lamp’s functions, voltage, connector, and wiring compatibility with your vehicle before installation. A listing that describes stop, tail, turn, or reverse functions does not by itself establish compatibility with every truck. Some systems may require an additional harness; the OPT7 Redline listing notes this possibility.

Do I need to check local rules or vehicle requirements before installing a tailgate light bar?

Yes. Check applicable local rules and your vehicle requirements before installing a tailgate light bar, including whether its placement and functions are permitted. Confirm that the bar’s connections match your truck’s wiring and that it does not interfere with existing lamps.

Product descriptions alone cannot establish compliance for every location or vehicle.

What should I check before choosing an oval replacement light?

Check the opening, grommet, and connector against the light before ordering. The RUNHWEE listing identifies a six-inch oval light kit, but that description does not confirm fit for every truck or trailer. Compare the existing lamp’s shape and mounting arrangement with the product details, and verify the wiring connection.

When should I choose a tailgate light bar instead of replacement lamps?

Choose a bar when you want a strip mounted along the tailgate and its installation method suits your truck. The listings include a Nilight bar with adhesive installation and an OPT7 bar with sequential amber turns; the latter may need an additional harness. For a conventional lamp opening, compare replacement lights instead.

Final Words

For a conventional heavy-duty replacement, the EAGLE KING HTL-T101 is the leading choice here: it lists five lighting functions, a 12V three-stud format, and stated DOT and SAE compliance. Confirm hole spacing and fit before ordering. Consider surface-mounted Partsam lamps, an oval option, or a tailgate bar only when their mounting, wiring, and vehicle requirements suit your setup.

Leave a Reply

Your email address will not be published. Required fields are marked *