Best Sbc Long Water Pump Power Steering Bracket for SBC Builds

#1 · Best Overall

1. Moker SBC Adjustable Bracket Kit

• Weight: 1.08 lb
• Package Dimensions: 7.99 x 4.45 x 1.26 in

Best for: Long-water-pump V-belt builders.

Why it ranks #1: Specifies long-water-pump fit and 19319932 or 19319961 style pumps, supports V-belts and one- or two-rib pulleys, and includes mounting hardware.

Compatibility with 19319932- or 19319961-style pumps and V-belts, including single- and dual-rib pulleys, gives this Moker kit a defined target for SBC long-water-pump builds. Its low driver-side mounting position and slotted arm let the installer adjust belt tension while positioning the pump close to the engine.

The long-water-pump requirement and specified pump styles narrow the fit to a particular SBC setup, while support for V-belts and one- or two-rib pulleys covers several listed belt arrangements. Low driver-side placement provides the intended mounting position, and the slotted arm supports belt-tension adjustment after installation. Billet aluminum forms the bracket, and the kit includes mounting hardware, so the buyer gets the bracket and its hardware together for assembly.

Skip it if you have a short-water-pump SBC or a pump outside the two listed styles; the Adorish bracket supports both long and short water pumps.

Choose this Moker kit for an SBC long-water-pump installation using a listed pump style and V-belt pulley. Its low driver-side position and included hardware suit an adjustable setup, but the pump and water-pump type must match.

Listed on Amazon as: SBC Power Steering Pump Bracket Kit – Adjustable V-Belt Slotted 305 327 383 5.0L 5.7L V8 LWP Low Mount Power Steering Pump Bracket Compatible with Chevy 350 Small Block Long Water Pump

#2 · Billet Aluminum

2. ICT Billet SBC Bracket

• Weight: 1.1 lb
• Material: Aluminum

Best for: Billet-aluminum long-pump builds.

Why it ranks #2: The listing identifies billet aluminum construction and a slotted, adjustable long-water-pump bracket for SBC applications, making it a close match to the target setup.

Billet aluminum is the defining material of this ICT Billet SBC power-steering bracket, which is listed for long-water-pump applications. Its title also identifies a slotted, adjustable V-belt bracket for 305, 327, 383, 5.0L, and 5.7L V8 references, giving builders a focused starting point for belt-driven setups.

The long-water-pump designation narrows this bracket to builds using that water-pump arrangement, while the title’s V-belt and slotted-adjustable wording points to a belt-tension workflow rather than a fixed-position description. Billet aluminum is the stated material, and the product dimensions are 11.2 by 1.1 by 0.2 inches, which provides physical reference information when planning the engine-bay installation. The listed engine references include 305, 327, 383, 5.0L, and 5.7L V8 applications.

Skip it if you need stated compatibility with a particular pulley-rib count or pump style; Moker 551522 lists both pump styles and supported pulley types.

Consider this ICT Billet bracket for a long-water-pump SBC V-belt build where billet aluminum and slotted adjustment match the plan. The supplied details do not identify a pump style or pulley-rib count, so those remain key fitment boundaries.

Listed on Amazon as: ICT Billet SBC Power Steering Pump Bracket Billet Aluminum V-Belt Slotted Adjustable LWP 305 327 383 5.0L 5.7L V8 Compatible With 350 Small Block Chevy Long Water Pump 551522

#3 · Lifetime Warranty

3. CVF Racing SBC Bracket

• Weight: 1.3 lb
• Material: Aluminum

Best for: CNC-machined billet long-pump setups.

Why it ranks #3: Fits SBC engines including 283 through 400 with a long water pump, includes mounting hardware, and lists a lifetime warranty on CVF Racing products.

CNC-machined billet aluminum gives the CVF Racing bracket a clearly specified construction for SBC power-steering installations. It requires a long water pump and long-water-pump pulleys, and includes mounting hardware, making it a focused option for builders planning around that pulley and pump arrangement.

The stated long-water-pump and long-water-pump-pulley requirements define the setup this bracket supports, while the listed engine range covers SBC 283, 302, 305, 327, 350, and 400 applications. CNC-machined billet aluminum identifies how the bracket is made and what material is used. Included mounting hardware supports the installation workflow, and the listing notes that it works best with CVF Racing’s SBC1PS power-steering pulley, a useful reference when selecting matched components.

Skip it if you run short-water-pump pulleys; the Adorish bracket lists both long- and short-water-pump compatibility.

This CVF Racing bracket suits an SBC builder assembling around a long water pump and its matching pulleys, with hardware included. Its listed engine range is broad, but the pulley and pump requirements define the fit.

Listed on Amazon as: Chevy Small Block Power Steering Bracket – Electric or Long Water Pump

#4 · Low-Mount Adjustability

4. YIUIY SBC Adjustable Bracket

• Weight: 0.52 kg
• Material: Alloy Steel

Best for: Specified-pump low-mount setups.

Why it ranks #4: Specifies a long water pump and 19319932 or 19319961 style pump, with a low driver-side position and slotted arm for belt tension.

A slotted arm paired with a low driver-side mounting position gives the YIUIY bracket a clear role in SBC long-water-pump builds. It targets 19319932- or 19319961-style power-steering pumps and supports one- and two-rib V-belt pulleys, linking its adjustment feature to a defined pump and belt setup.

The specified long-water-pump arrangement and two listed pump styles help narrow the compatibility check before installation. For supported builds, the low driver-side position places the power-steering pump in the intended location, while the slotted arm allows belt tension to be maintained through adjustment. One- and two-rib V-belt pulley support offers two stated pulley configurations. The bracket is listed as alloy steel, a practical material detail for buyers comparing this option with aluminum brackets.

Skip it if you run a short water pump or serpentine belt; the Baiann bracket lists long-water-pump SBC fitment and serpentine pulley compatibility.

This YIUIY option suits an SBC builder using a long water pump, a listed pump style, and a one- or two-rib V-belt pulley. Its low mount and slotted arm are relevant, but other pulley arrangements fall outside the stated fit.

Listed on Amazon as: for SBC Power Steering Pump Bracket Adjustable Compatible with Chevy 350 Small Block LWP Long Water Pump

#5 · Broad Pulley Range

5. Baiann SBC Bracket

• Weight: 1.08 lb
• Package Dimensions: 8.11 x 4.72 x 1.46 in

Best for: Mixed pulley long-pump builds.

Why it ranks #5: Fits SBC long-water-pump setups and lists compatibility with one-, two-, or three-rib pulleys as well as serpentine belt pulleys.

Support for one-, two-, or three-rib pulleys as well as serpentine pulleys sets the Baiann bracket apart for SBC long-water-pump builds. It mounts the power-steering pump low on the driver’s side, giving buyers a stated placement and a broad range of listed pulley styles to consider.

The long-water-pump requirement keeps the fitment focused on that SBC configuration, while the listed pulley range accommodates one-, two-, and three-rib setups plus serpentine pulleys. That range can help buyers match the bracket to different belt arrangements without changing the stated low driver-side mounting location. Baiann identifies the kit as an option to add or replace a power-steering pump, making it relevant to both an installation and a bracket replacement within its supported setup.

Skip it if you have a short-water-pump SBC; the daola888 bracket lists compatibility with both short and long water pumps.

Pick the Baiann bracket for an SBC long-water-pump build where pulley choice may be one, two, or three ribs or serpentine. Its low driver-side placement is specified, but short-water-pump installations are outside its stated fitment.

Listed on Amazon as: Baiann SBC Power Steering Pump Bracket 350 V-Belt Slotted Adjustable LWP 305 327 383 5.0L 5.7L V8 Compatible With 350 Small Block Chevy Long Water Pump

#6

6. RJSPHH SBC Bracket

• Weight: 0.51 kg

Best for: Long-pump serpentine conversions.

Why it ranks #6: Lists an SBC long-water-pump fit and low driver-side mount with a slotted tension arm, though its belt-compatibility descriptions are inconsistent.

Compatibility with one-, two-, or three-rib pulleys and serpentine pulleys gives this RJSPHH bracket a broad stated belt range for SBC long-water-pump builds. It mounts the pump low on the driver’s side, and its slotted arm supports belt-tension adjustment for installations that need an adjustable mounting point.

The long-water-pump requirement defines the engine configuration, while the listed ribbed and serpentine pulley options let buyers compare the bracket with several belt arrangements. Low driver-side mounting describes the pump position, and the slotted arm provides a means to maintain belt tension during setup. The product is identified for adding or replacing a power-steering pump. Its supplied facts also emphasize that compatibility depends on the listed pump style, so that interface should be checked alongside the pulley arrangement.

Skip it if you need a bracket explicitly matched to 19319932- or 19319961-style pumps; the Moker 551522 names those pump styles.

The RJSPHH bracket fits buyers seeking a low driver-side mount for a long-water-pump SBC with one of its listed pulley styles. Its slotted arm supports tension adjustment, but the pump interface remains a specific fitment boundary.

Listed on Amazon as: SBC Power Steering Pump Bracket 350 V-Belt Slotted Adjustable LWP 305 327 383 5.0L 5.7L V8 Compatible With 350 Small Block Chevy Long Water Pump

#7

7. A-Premium Polished Bracket Kit

• Weight: 1.47 lb
• Package Dimensions: 9.06 x 5.12 x 1.77 in

Best for: Saginaw keyway single-groove builds.

Why it ranks #7: Fits SBC engines with a long water pump and Saginaw key-way style pumps, but explicitly excludes short pumps and double-groove power steering pulleys.

A polished aluminum finish and explicit Saginaw key-way pump compatibility define the A-Premium bracket’s intended setup. It fits listed Chevy small-block engines with a long water pump and mounts to the driver-side water pump, while its restriction against double-groove power-steering pulleys makes pulley selection a critical part of the fit check.

The stated long-water-pump requirement and engine list—265, 283, 305, 327, 350, 383, and 400—help identify the applications this bracket targets. Its Saginaw key-way pump specification further narrows the pump interface, and driver-side water-pump mounting clarifies where the bracket attaches. The polished aluminum construction supplies the listed material and finish. Because double-groove power-steering pulleys are explicitly excluded, confirm the pulley configuration before planning installation.

Skip it if you use a double-groove power-steering pulley; the Adorish bracket lists single- and double-groove pulley compatibility.

Choose this A-Premium bracket for a listed Chevy small block with a long water pump and Saginaw key-way pump. Its polished aluminum and driver-side water-pump mounting suit that layout, but double-groove pulleys are excluded.

Listed on Amazon as: A-Premium Polished Aluminum Power Steering Pump Bracket Kit

#8

8. Adorish SBC Mounting Bracket

• Weight: 1.78 lb
• Package Dimensions: 8.74 x 4.41 x 0.67 in

Best for: Top-or-across bracket positioning.

Why it ranks #8: Claims compatibility with long and short water pumps and single- or double-groove pulleys, but gives less specific pump-style guidance for this long-pump search.

The option to mount this Adorish bracket on top of or across the power-steering pump gives builders two stated positioning approaches. Its listed compatibility covers SBC engines with either a long or short water pump and single- or double-groove pulleys, making it a flexible fitment candidate across those configurations.

Support for both long- and short-water-pump SBC engines gives this bracket a wider stated water-pump range than long-pump-only options. The top-or-across mounting choice lets the installer select between the two listed bracket positions, while single- or double-groove pulley compatibility addresses two belt-pulley arrangements. Its application examples include Camaro, Nova, Chevy/GM trucks, Chevelle, Malibu, El Camino, Monte Carlo, Impala, Caprice, and Bel Air, useful for narrowing a vehicle-based fitment check.

Skip it if you use a three-rib or serpentine pulley; the Baiann bracket lists compatibility with those pulley styles.

This Adorish bracket suits builders who need stated long- or short-water-pump SBC compatibility and a choice of top or across positioning. Its pulley range is specified for single or double grooves, so check that boundary against your setup.

Listed on Amazon as: Power Steering Pump Mounting Bracket LWP SWP Compatible with SB SBC Ch-evy engines 262 265 283 302 305 307 327 350 400 Black

#9

9. daola888 SBC Mounting Bracket

• Weight: 1.79 lb
• Material: aluminum, chrome, steel
• Package Dimensions: 8.7 x 4.09 x 1.26 in

Best for: Broad SBC water-pump fitment.

Why it ranks #9: Lists SBC engine compatibility with both long and short water pumps, but does not identify a specific pump style or belt-tension adjustment feature.

Compatibility with both short- and long-water-pump configurations is the key distinction of this daola888 bracket. Its stated engine range spans Chevy/GM small blocks from 262 through 400, giving builders working across those listed engines a single bracket option to consider for either water-pump arrangement.

The listed short- and long-water-pump compatibility makes this bracket relevant when the engine’s water-pump configuration differs across a build, while its engine list identifies the SBC families it targets. The product is made from steel, with aluminum and chrome also appearing in the material specification, so buyers should review the listed material details before choosing it. Its stated vehicle examples include Camaro, Nova, Chevy/GM trucks, Chevelle, Malibu, and El Camino, helping frame the intended applications.

Skip it if you need a documented slotted tension adjustment; the Moker 551522 explicitly uses a slotted arm for belt-tension setting.

Consider this bracket when your Chevy/GM small-block application falls within its listed engine range and may use either water-pump length. Its broad fitment is useful, but the listing does not detail an adjustment method.

Listed on Amazon as: Power Steering Pump Mounting Bracket, LWP SWP, Compatible with Chevy/GM SB SBC 350 262 265 283 302 305 307 327 400 (Silver).short water pump/Long water pump.

#10

10. Woosphy Double-Groove Pulley Kit

• Material: Aluminum

Best for: Double-groove keyway pulley replacements.

Why it ranks #10: It covers SBC engines and GM keyway pumps but is a replacement bracket with a specified double-groove V-belt pulley, a narrower match than the other options.

The included double-groove V-belt pulley makes the Woosphy kit a specific replacement option for Chevy small blocks using GM Chevy keyway power-steering units. Its listed 5/8-inch keyway bore and 5 3/4-inch outside diameter give buyers concrete pulley dimensions to compare with the existing setup.

The kit targets Chevy small-block engines from 265 through 400 and lists compatibility with GM Chevy keyway power-steering units, which helps define both engine and pump interface. Its V-belt pulley has two grooves, a 5/8-inch keyway bore, and a 5 3/4-inch outside diameter; those specifications support a direct dimensional comparison when planning a replacement. The listing also names 3913C, 4312C, and 9609x pulley styles, making those references part of the fitment check.

Skip it if you need a serpentine pulley; the Baiann bracket lists serpentine-pulley compatibility for long-water-pump SBC engines.

Choose this Woosphy kit when replacing a two-groove V-belt and keyway-style setup on a listed Chevy small block. Its pulley dimensions and named styles aid comparison, but the stated pulley format is not serpentine.

Listed on Amazon as: Power Steering Pump Bracket w/Double Groove Pulley Kit Replacement for GM