Best Chinese Atv Lower Control Arm: Compare 10 Options

#1 · Best Overall

1. LenvraSQ Front A-Arm Set

Best for: Complete small-ATV front refresh.

Why it ranks #1: Lists 110cc–150cc ATV fitment and includes two upper plus two lower arms, making it a complete front-set match for common Chinese quads.

A four-arm package supplies both upper and lower front A-arms for 110cc to 150cc ATVs, so buyers can replace a complete front set rather than source each level separately. Steel tubing and a powder-coated finish address the mud, water, and debris encountered off road, while the stated adjustable design adds setup flexibility.

The included two upper and two lower arms make this a complete front suspension component set for a repair or rebuild. Its 110cc–150cc application gives small-quad owners a defined engine-size range, and the steel-tube construction is paired with a powder-coated finish to resist rust in wet, muddy riding conditions. The listing also calls the design adjustable, which supports setup flexibility, though it does not provide adjustment measurements or a specific vehicle fitment chart.

Skip it if you need a stated model-specific fitment or measured adjustment range; the listing gives an engine-size range but no mounting dimensions.

A practical candidate for a rider refreshing both front suspension levels on a 110cc–150cc quad and seeking coated steel arms. Check the vehicle’s mounting layout, since the supplied details do not identify exact chassis applications.

Listed on Amazon as: Front A-Arm Suspension Control Arm Set for 110cc 125cc 150cc ATV Quad 4 Wheeler, Upper & Lower A Arms Assembly for Go Kart Buggy Mini Bike Golf Cart Taotao Coolster Off Road Front Suspension Kit

#2 · Best Stated Lengths

2. Zarko Front A-Arm Set

Best for: Reinforced small-quad front set.

Why it ranks #2: Targets 110cc and 150cc ATVs and supplies two upper and two lower arms, with listed lengths of 10.2 inches and 8.3 inches.

Thick-walled, precision-welded steel tubing distinguishes this complete four-arm front set, with two upper and two lower A-arms included. Its listing targets 110cc and 150cc ATV quads and gives arm lengths of 10.2 and 8.3 inches for buyers comparing a small-quad setup.

The paired upper and lower arms cover both front suspension levels, while the stated 10.2-inch and 8.3-inch lengths help with planning a replacement or upgrade. Reinforced steel tubing and precision welds are described as providing rigidity and impact resistance, and the black powder coat is intended to resist rust and corrosion in off-road conditions. The stated 110cc–150cc application offers an engine-size guide, but no exact chassis models are identified.

Skip it if you require a named Yamaha application; maXpeedingrods YQ32YD lists the Big Bear 350 from 1987–1997.

A sensible fit to investigate for a 110cc or 150cc quad needing both upper and lower front arms, especially where reinforced tubing matters. Use the supplied lengths as a comparison point, since exact chassis fitment is not stated.

Listed on Amazon as: Front A-Arm Suspension Component Set for 110cc 150cc ATV Quad 4 Wheelers including 2 Upper and 2 Lower Control Arms 10.2 inch and 8.3 inch Length for Taotao Coolster Off-Road Upgrade

#3 · Broadest Engine Range

3. 91.SCS 300mm Swing Arm Kit

• Material Type: Iron
• Material: Iron

Best for: Measured DIY suspension rebuild.

Why it ranks #3: Covers 110cc–200cc engines and gives separate 200mm upper and 300mm lower arm lengths in a four-piece front suspension set.

A four-piece kit gives DIY builders two 200mm upper swingarms and two 300mm lower swingarms, making its arm lengths unusually explicit. That split supports planning a front-end rebuild around known dimensions, with listed engine compatibility spanning 110cc, 150cc, and 200cc applications.

The measured upper and lower lengths help a builder compare the kit with an existing suspension layout before assembly, while the complete pair of each arm avoids piecing together a four-arm set. The listing targets 110cc–200cc engines and names ATV, go-kart, quad, buggy, UTV, four-wheeler, and mini-bike uses. Iron construction is specified, but the supplied details do not identify exact chassis models or provide mounting-hole measurements, so dimensions alone cannot establish fit.

Skip it if you need a model-specific bolt-on application; High Lifter MCFLA-H500-R is listed for compatible 2014–2022 Honda Foreman, Rancher, and Rubicon models.

A fit to investigate for a DIY builder who can work from the stated 200mm and 300mm lengths and needs a complete arm set. Treat compatibility as project-dependent because no exact chassis mounting dimensions are given.

Listed on Amazon as: 300mm Front Suspension Swing Arm Kit – Upper/Lower A-Arms for 110cc 125cc 150cc 200cc ATV, Go Kart, Quad, Buggy, UTV, 4 Wheeler, Mini Bike- Complete Go Kart Suspension Assembly

#4 · Small-Engine Fitment

4. Zarko 265mm Swing Arm Set

• Material Type: Alloy Steel
• Material: Alloy Steel

Best for: Compact ATV dimension planning.

Why it ranks #4: Lists compatibility from 70cc to 150cc and includes two upper and two lower arms, with stated lengths of 215mm and 265mm.

A complete set pairs 215mm upper swingarms with 265mm lower arms, giving builders concrete dimensions for a front suspension project. The listed range spans 70cc to 150cc vehicles, so it covers smaller ATV and go-kart applications that may fall below common 110cc-focused kits.

Two upper and two lower arms provide the components for a full front-end assembly, while the 215mm and 265mm lengths help a builder compare the set with available suspension geometry. Alloy steel is specified for rugged-terrain use, and the stated compatibility covers 70cc, 90cc, 110cc, 125cc, and 150cc ATVs, quads, and go-karts. The listing does not name particular vehicle models or provide mounting-hole dimensions, limiting fit certainty for a specific chassis.

Skip it if you need named vehicle fitment rather than general engine-size coverage; BETEIIAU ATV-4006/4007 specifies Yamaha Banshee 350 model years.

Worth assessing for a small-vehicle project where the 215mm and 265mm dimensions match the planned geometry. Its broad 70cc–150cc range is not a substitute for chassis measurements, which are not supplied for model-specific confirmation.

Listed on Amazon as: Automotive Replacement Front Suspension Upper and Lower Swing Arm Assembly 265mm for 70cc 90cc 110cc 125cc 150cc ATV Quad Go Kart Propulsion Drivetrain Set

#5

5. LenvraSQ Upper and Lower Arms

• Material Type: Iron
• Material: Iron

Best for: Custom chassis arm sizing.

Why it ranks #5: Provides four arms for DIY builds and lists 300mm upper A-arms and 200mm lower U-arms, but calls for frame and geometry checks.

This four-piece set combines 300mm upper A-arms with 200mm lower U-arms, a specific dimensional pairing for custom chassis work. The listing frames the arms for compatible front or rear suspension assemblies, which gives DIY builders more layout flexibility than a front-only kit.

Two upper A-arms and two lower U-arms let a builder plan a complete pair of suspension levels, while the listed 300mm upper length and 200mm lower length provide starting points for checking chassis space. Iron construction is specified, and the listing names ATV, quad, go-kart, buggy, drift-trike, four-wheeler, and snowmobile projects. It also advises checking mounting locations and suspension geometry, so fit depends on the build rather than a named factory model.

Skip it if you want a direct-fit named ATV application; maXpeedingrods YQ32YD specifies Yamaha Big Bear 350 model years.

A candidate for a custom recreational-vehicle builder who can assess the 300mm and 200mm arm lengths against the frame. Its front-or-rear project flexibility comes with a clear boundary: no specific factory chassis fitment is listed.

Listed on Amazon as: 300mm Upper A-Arms 200mm Lower U-Arms Suspension Control Arm Set for ATV Quad Bike Go Kart Buggy Drift Trike Four Wheeler Snowmobile, Metal Frame Components Compatible with TaoTao Coolster DIY Builds

#6

6. Waverleyatv K277 Assembly

Best for: Rough-trail steel-arm replacement.

Why it ranks #6: Names Chinese 150cc, 200cc, and 250cc vehicles, but its package description emphasizes two upper swingarms, leaving lower-arm contents unclear.

Thick seamless steel pipe with a matte black powder coat is the defining feature here, aimed at resisting bending, corrosion, and impact loads on uneven trails. The listing names Chinese 150cc, 200cc, and 250cc horizontal-engine vehicles, giving builders a broader stated engine range than many small-quad kits.

The steel-pipe construction and claimed bending resistance speak to riders tackling climbs and bumpy terrain, while the corrosion-resistant coating is relevant to repeated outdoor use. Compatibility is described for many Chinese 150cc–250cc horizontal-engine ATVs, quads, go-karts, and buggies, including Apollo, Coolster, Sunl, and homemade frames. However, package details conflict: the features mention an upper-and-lower assembly, while the description says two upper swingarms with bolts, so verify what the offered kit contains before planning a full refresh.

Skip it if you require a clearly specified four-arm front set; Zarko TTW79 lists two uppers and two lowers without this listing’s package ambiguity.

Consider it for a rough-terrain build within the stated Chinese horizontal-engine range, especially when corrosion resistance matters. The uncertain package contents are a meaningful boundary, so confirm whether lower arms are included before scheduling installation.

Listed on Amazon as: Front A-Arm Suspension Assembly kit Upper Lower Control Arms Swing Arm for 110cc 150cc 125cc ATV Quad 4 Wheelers Go kart

#7

7. BETEIIAU Banshee A-Arms

• Material Type: Stainless Steel
• Material: Stainless Steel

Best for: Banshee direct-bolt refresh.

Why it ranks #7: Includes upper and lower arms as a complete set, but fitment is specifically for the Yamaha Banshee 350 from 1987–2006.

Factory-mount installation for 1987–2006 Yamaha Banshee 350 and YFZ350 is the key differentiator, giving owners a clearly defined replacement application. The complete left-and-right upper and lower A-arm set supports a full front suspension refresh without adapting the listed fitment to a generic Chinese-quad platform.

The specified Banshee/YFZ350 model years and factory mounting points make the application clearer than a broad engine-size listing, helping owners plan a direct replacement. Because the kit includes left and right upper and lower arms, it covers both suspension levels across the front. Stainless steel is listed as the material, and the product is presented for replacing worn, bent, or aging OEM arms while maintaining suspension alignment. Its narrow model-year fitment is also its central boundary.

Skip it if you own a small Chinese 110cc–150cc quad; Zarko TTW79 is listed as a front set for that engine-size range.

Best suited to a Banshee 350 or YFZ350 owner replacing the complete front arm set while retaining factory mounting points. The specified 1987–2006 range is the important fit boundary; it is not a universal ATV kit.

Listed on Amazon as: Front Upper Lower A-Arms For Kit 1987-2006 Yamaha Banshee 350 ATV YFZ350,Steel Replacement Control Arms Set, Direct Bolt-On Front Suspension Arms,Wrinkle Black

#8

8. maXpeedingrods Big Bear Arms

Best for: Big Bear lower-arm pair.

Why it ranks #8: Supplies left and right lower arms with reference numbers, but fitment is limited to the Yamaha Big Bear 350 from 1987–1997.

A dedicated left-and-right lower-arm pair for the 1987–1997 Yamaha Big Bear 350 makes this a focused replacement rather than a full suspension package. High-strength carbon steel and a powder-coated finish provide the listed material and corrosion-resistance details for owners restoring the lower front arms.

The package supplies one lower right and one lower left A-arm, letting Big Bear owners address both sides of the lower suspension without buying upper arms they may not need. The stated 1987–1997 model range narrows the application, while carbon-steel construction and powder coating are described as supporting durability and resistance to rust and corrosion. Since the kit contains lower arms only, it is not a complete upper-and-lower front refresh.

Skip it if you need upper and lower arms together; LenvraSQ SQTK277 lists two upper and two lower arms for 110cc–150cc applications.

A targeted option for a 1987–1997 Big Bear 350 owner replacing both lower sides while keeping the repair limited to that suspension level. Check the model-year boundary and source upper arms separately if the full front set needs renewal.

Listed on Amazon as: maXpeedingrods 2Pcs Front Lower Control A-Arms for Yamaha Big Bear 350 1987-1997, 2HR-23580-00-00 2HR-23570-00-00 Suspension Kit ATV Control Arms

#9

9. High Lifter Foreman Lower Arms

• Material Type: Steel
• Material: Steel

Best for: Clearance-focused Honda trail arms.

Why it ranks #9: Offers lower control arms for specified Honda Foreman, Rancher, and Rubicon models, not general Chinese ATV fitment.

Strategically arched lower arms are the central feature, intended to increase ground clearance while following axle angle for protection. The listing targets compatible 2014–2022 Honda Foreman, Rancher, and Rubicon models, giving trail riders a model-family-specific alternative to generic control-arm sets.

The arch is described as adding ground clearance while maintaining the axle’s angle, a combination relevant to rocky or muddy trails where clearance and axle protection matter. High Lifter also says the arms install like factory arms, which supports a replacement workflow for the listed Honda models. Their steel construction is specified, and the product is described as 25% larger than average stock arms. Exact model sub-variants are not detailed in the supplied facts.

Skip it if you need a complete upper-and-lower four-arm kit; 91.SCS SCSTK063 specifies two upper and two lower arms.

A relevant option for compatible Honda Foreman, Rancher, or Rubicon riders prioritizing added clearance on rocky or muddy trails. Check the exact machine variant against the stated 2014–2022 range before choosing this focused lower-arm set.

Listed on Amazon as: High Lifter Front Lower Control Arms Compatible with Honda Foreman, Rancher, Rubicon ATV | Compatible with 2014-2022 Models (Red)

#10

10. maXpeedingrods TRX 400EX A-Arm

Best for: Wider TRX 400EX front stance.

Why it ranks #10: Lists a plus-four-inch adjustable arm for the 1999–2004 Honda TRX400EX, so its model-specific Honda fitment is a poor match here.

The stated plus-four-inch overall width, split as two inches per side, is the defining change for this adjustable front A-arm set. It is listed for the 1999–2004 Honda TRX400EX/Sportrax 400EX, giving owners a specific application alongside a measurable stance change.

The listed width increase can help buyers planning a wider front setup, while the plus-zero-inch forward figure clarifies that the stated change is lateral rather than forward. Steel construction with a powder-coated finish is described as resisting corrosion, supporting use in outdoor conditions. Fitment is confined to the named 1999–2004 Honda TRX400EX application, and the available information does not provide an adjustment range beyond the stated width and forward figures.

Skip it if you need a broad small-quad engine-range kit; Zarko TTW79 is listed for 110cc and 150cc ATV applications.

A focused choice for a TRX400EX owner seeking the specified wider front stance without a forward extension. Keep the 1999–2004 model-year application in view, since the listing does not claim fitment across other Honda ATV lines.

Listed on Amazon as: maXpeedingrods Adjustable A Arm for Honda ATV TRX 400EX 1999-2004