Best 2 Inch Suspension Lift Kits for Jeeps and Trucks

#1 · Best Overall

1. Rough Country Cherokee KL Kit

• Weight: 7.1 lb
• Material: Alloy Steel, Aluminum, Rubber, Zinc
• Material Type: Alloy Steel, Aluminum, Rubber, Zinc

Best for: Cherokee KL with struts and shocks.

Why it ranks #1: This vehicle-specific 2-inch kit includes lifted struts, shocks and coil springs; the listing says it fits Cherokee KL models and clears tires up to 32 inches with trimming.

Two Premium N3 lifted struts and two N3 shocks are included in Rough Country’s two-inch kit for 2014–2023 Jeep Cherokee KL models. That combination offers KL owners a complete set of listed damping components alongside added clearance, with the manufacturer stating capacity for tires up to 32 inches with some trimming.

The kit combines front struts, shocks, and coil springs, rather than relying on spacers alone; the listed components give buyers a coordinated suspension package for the two-inch lift. Rough Country says it levels the front with the rear and maintains a smooth, factory-like ride, connecting the height change with its intended stance and ride character. The stated tire clearance reaches up to 32 inches with some trimming. Rough Country recommends certified installation and knowledge of suspension procedures and checks.

Skip it if you need installation suited to an at-home beginner; Rough Country 69530 is described as an easy bolt-on home installation for WJ models.

Consider it for a 2014–2023 Cherokee KL owner wanting a two-inch lift with struts, shocks, and springs included. The 32-inch tire note requires some trimming, and Rough Country advises certified installation.

Listed on Amazon as: Rough Country 2" Lift Kit w/N3 Struts for 2014-2023 Jeep Cherokee KL – 60431

#2 · Best 33-Inch Clearance

2. BDS Wrangler JK Kit

• Weight: 19.2 lb
• Material: Alloy Steel, Durable Coatings…
• Material Type: Alloy Steel, Durable Coatings…

Best for: JK owners seeking 33-inch clearance.

Why it ranks #2: The full front-and-rear kit fits Wrangler JK 2- and 4-door models and is specified to allow clearance for 33-inch tires.

Urethane coil spacers help this BDS two-inch lift maintain factory ride, while the listed setup provides clearance for 33-inch tires on 2007–2018 Jeep Wrangler JK two- and four-door models. Bump-stop spacers are included to prevent harsh bottom-outs, making the package attentive to suspension travel as well as tire clearance.

The urethane coil spacers are specified to maintain factory ride, giving buyers a lift approach that preserves the stated ride character. Bump-stop spacers help prevent harsh bottom-outs, addressing suspension compression alongside the increased height. BDS offers a choice of NX2 gas or FOX 2.0 IFP performance-series shocks for improved damping, so buyers can select a shock series suited to their preference. The kit is listed for 2007–2018 JK two- and four-door models and allows clearance for 33-inch tires.

Skip it if you own a 1987–1995 Wrangler YJ and want leaf springs; BDS408H is listed for that platform.

Consider this BDS kit for a 2007–2018 JK owner seeking two inches of lift and 33-inch tire clearance, with bump-stop spacers included. Its stated compatibility covers both two- and four-door JK models.

Listed on Amazon as: BDS463H | 2 Inch Full Suspension Lift Kit (Front & Rear) | Coil Spacer | Compatible with Jeep Wrangler JK (07-18) 2/4-Door

#3 · Best Spring Retention

3. Rough Country Wrangler TJ Kit

• Weight: 15.42 kg
• Material: Alloy Steel, Aluminum, Rubber, Zinc
• Material Type: Alloy Steel, Aluminum, Rubber, Zinc

Best for: TJ and LJ lift with spring retention.

Why it ranks #3: This TJ/LJ kit includes four N3 shocks, spacers and relocation brackets; its spring-retention design is intended to keep coils in place during articulation.

A spring-retention design keeps the coil springs in place during extreme articulation, a specific feature of Rough Country’s two-inch lift for 1997–2006 Wrangler TJ/LJ models. The kit also includes four N3 shocks and levels the front with the rear, combining suspension components with a stated factory-like ride.

Four Premium N3 shocks are included for on- and off-road use, while coil spring spacers and shock relocation brackets complete the listed component package. Rough Country says the lift increases ground clearance, levels the front with the rear, and maintains a smooth, factory-like ride. Its spring-retention design is intended to keep coils in place during extreme articulation, a relevant feature for drivers using suspension travel. The stated application covers 1997–2006 Wrangler TJ/LJ models, and the kit uses bolt-on installation.

Skip it if you want TeraFlex 1241200's stated 31-inch tire fit for standard-wheelbase TJ and long-wheelbase LJ models.

This suits TJ/LJ owners seeking two inches of lift, four N3 shocks, and spring retention during extreme articulation. Plan for the stated bolt and nut checks, and verify that the listed 1997–2006 application matches your vehicle.

Listed on Amazon as: Rough Country 2" Suspension Lift Kit for 1997-2006 Jeep Wrangler TJ/LJ – 65830

#4 · Best WJ Ride Setup

4. Rough Country Grand Cherokee WJ Kit

• Weight: 39.4 lb
• Material: Metal
• Material Type: Metal

Best for: WJ owners seeking shocks.

Why it ranks #4: The 2-inch WJ kit includes Premium N3 shocks and is described as leveling the vehicle while maintaining a factory-like ride.

Premium N3 shock absorbers come with this two-inch lift kit for 1999–2004 Jeep Grand Cherokee WJ 4WD models, giving owners a single package for added ground clearance and suspension damping. Rough Country also says it levels the front with the rear while retaining a smooth, factory-like ride.

The included N3 shocks are specified for on- and off-road use, so the kit combines added ground clearance with components intended for varied driving conditions. Its leveling setup aims to bring the front and rear into line while maintaining the stated factory-like ride character. Rough Country describes installation as an at-home bolt-on process and provides support, making this a defined option for WJ owners comfortable with suspension work. The application is specifically the 1999–2004 4WD Grand Cherokee.

Skip it if you need a kit for a Jeep Cherokee KL; Rough Country 60431 is listed for 2014–2023 KL models.

This suits WJ 4WD owners seeking a two-inch lift with N3 shocks and a stated factory-like ride. Its application is narrow: it covers 1999–2004 Grand Cherokee WJ 4WD, not other Jeep platforms or model years.

Listed on Amazon as: Rough Country 2" Lift Kit for 1999-2004 Jeep Grand Cherokee WJ 4WD – 69530

#5

5. TeraFlex TJ Lift Kit

• Weight: 68 lb
• Material: Steel
• Material Type: Steel

Best for: TJ and LJ lift with shocks.

Why it ranks #5: This 2-inch TJ/LJ kit includes hardware, instructions and TeraFlex 9550 shocks, and is specified to fit standard- and long-wheelbase models.

TeraFlex includes 9550 shocks and all necessary hardware with this two-inch coil lift kit, giving Wrangler owners a package that covers both standard-wheelbase TJ and long-wheelbase LJ Unlimited models. The stated tire fit reaches up to 31 inches, with an installation time listed at five hours.

The included TJ coil kit, hardware, instructions, and TeraFlex 9550 shocks bring the main listed installation components together, reducing the need to source those items separately. Fitment spans standard-wheelbase TJ Wrangler and long-wheelbase LJ Wrangler Unlimited models, an important distinction for buyers choosing by wheelbase. TeraFlex lists compatibility with tires up to 31 inches and a five-hour installation time. This is a two-inch lift package with shocks, not the separately available version without shocks.

Skip it if you need a kit for a 2007–2018 Wrangler JK; BDS463H is listed for that platform and allows 33-inch tires.

This suits TJ and LJ owners seeking a two-inch coil lift with shocks, hardware, and instructions supplied. The listed tire limit is 31 inches, and its five-hour installation estimate is relevant when planning the work.

Listed on Amazon as: TeraFlex 1241200 TJ 2" Lift Kit with Shock

#6 · Best YJ Full Lift

6. BDS Wrangler YJ Kit

• Weight: 68.2 lb
• Material: Alloy Steel, Durable Coatings…
• Material Type: Alloy Steel, Durable Coatings…

Best for: YJ full-suspension lift.

Why it ranks #6: A full front-and-rear 2-inch setup with Glide-Ride leaf springs, track-bar brackets and NX2 Nitro shocks, specified for Wrangler YJ models.

Glide-Ride leaf springs provide the full lift height in this two-inch BDS kit for 1987–1995 Jeep Wrangler YJ models, while front and rear track-bar brackets help center the axle. The package also includes a transfer-case drop kit to ease driveline angles and vehicle-specific NX2 Nitro shocks.

The front and rear track-bar relocation brackets address axle centering as part of the lift, while the transfer-case drop kit is specified to ease driveline angles. Glide-Ride leaf springs provide the full lift height and increased capacity, linking the two-inch change to the spring package. Vehicle-specific NX2 Nitro shocks use specified valving for better control. BDS describes installation as 100% bolt-on and states clearance for tires up to 31 inches, making the kit a broad suspension package for YJ owners.

Skip it if you need clearance for 33-inch tires on a Wrangler JK; BDS463H is listed for 2007–2018 JK models.

A fit for YJ owners wanting a full front-and-rear lift with springs, shocks, and driveline-angle provisions. The stated tire clearance is up to 31 inches, and this application is specific to 1987–1995 YJ models.

Listed on Amazon as: BDS408H | 2 in Full Suspension Lift Kit (Front & Rear) | Compatible with Jeep Wrangler YJ (87-95)

#7

7. maXpeedingrods Grand Cherokee WJ Kit

• Weight: 19250 g

Best for: Steel WJ lift with included shocks.

Why it ranks #7: This 2-inch front-and-rear WJ kit includes coil spring spacers and shocks, with high-strength steel and a corrosion-resistant powder-coated finish.

High-strength steel spacers and included shocks make this maXpeedingrods two-inch lift a complete listed component set for 1999–2004 Jeep Grand Cherokee WJ 4WD models. The front-and-rear lift is intended to increase ground clearance and level the vehicle, while the powder-coated finish is specified to resist corrosion and rust.

The kit includes front and rear coil spring spacers plus shocks, connecting the two-inch lift to components for both ends of the vehicle. maXpeedingrods describes the lift as increasing ground clearance and leveling the front with the rear, which can address stance as well as clearance needs. High-strength steel with a metallic, powder-coated finish is specified to resist corrosion and rust. Fitment is specifically limited to 1999–2004 Grand Cherokee WJ 4WD models.

Skip it if you prefer Rough Country 69530's Premium N3 shocks and supported at-home bolt-on installation for a 1999–2004 WJ 4WD.

This kit suits a 1999–2004 Grand Cherokee WJ 4WD owner seeking two-inch front-and-rear lift with spacers and shocks supplied. Keep the defined 4WD application in mind when considering this steel-based setup.

Listed on Amazon as: maXpeedingrods 2" Lift Kit for Jeep Grand Cherokee WJ 4WD 1999-2004

#8

8. KSP Silverado Leveling Kit

• Weight: 4.5 lb
• Material: Aluminum
• Material Type: Aluminum

Best for: Silverado and Sierra front leveling.

Why it ranks #8: The aluminum spacers raise the front 2 inches on specified Silverado and Sierra 1500 models, but this is a front leveling kit rather than a full lift.

Aircraft-grade aluminum spacers raise the front of compatible Silverado and Sierra 1500 trucks by two inches, giving owners a way to level the stance without a full suspension kit. The stated 2WD and 4WD coverage spans model years 2007–2026, with specific Trail Boss and AT4 exclusions.

The kit supplies two aluminum strut spacers, and KSP says their forged aircraft-grade construction supports safe driving even in extreme riding conditions. The two-inch figure describes front lift, not an equal change at every point: suspension geometry means kit thickness and lift height are not a 1:1 match. Since KSP recommends an alignment after installation, plan for that follow-up when scheduling the suspension work. Fit is limited to Silverado and Sierra 1500 models outside the named exclusions.

Skip it if you own a Silverado Trail Boss or Sierra AT4; this kit explicitly excludes those trims.

Choose this KSP kit if you want a two-inch front lift on a covered Silverado or Sierra 1500 and value aluminum spacers. It is not a full suspension kit, and the excluded trims and post-install alignment recommendation matter.

Listed on Amazon as: KSP 2" Silverado Leveling Lift Kits, 2in Front Suspension Lift Spacers Compatible With Chevy Silverado GMC Sierra 1500 2007-2026, 2pcs Aluminum Strut Spacers Increase 2inch Space on Pickup&Trucks

#9

9. KSP Ram Leveling Kit

• Weight: 3 lb
• Material: Aluminum
• Material Type: Aluminum

Best for: Ram 1500 front leveling.

Why it ranks #9: This aluminum spacer kit raises the front 2 inches on listed Ram 1500 4WD applications, but excludes Mega Cab and 4-Corner Air Suspension models.

CNC aluminum strut spacers raise the front by two inches on covered Ram 1500 4WD models, giving owners a focused leveling option rather than a full front-and-rear lift. The application also lists certain Dakota and Raider models, while excluding Ram Mega Cab and four-corner air-suspension configurations.

KSP includes CNC strut spacers and solid 12.9-grade bolts, combining accurately processed spacer components with specified high-grade fasteners for installation. The stated two-inch increase is at the front; because suspension geometry means kit thickness and lift height are not a 1:1 ratio, the spacer measurement should not be read as the final lift. KSP recommends an alignment after installation. Coverage includes Ram 1500 4WD, selected Dakota variants, and selected Raider variants, subject to listed exclusions.

Skip it if you have a Ram Mega Cab or four-corner air suspension; this kit is explicitly incompatible with those configurations.

This is for owners of the specified Ram 1500 4WD, Dakota, or Raider configurations seeking front leveling with aluminum spacers. Check the exclusions carefully: Mega Cab and four-corner air-suspension models are outside its stated fit.

Listed on Amazon as: KSP 2in Front Lift Kits for Ram 1500 2009-2026, 2" Leveling Lift Kit for 2009-2026 Dodge Ram 1500 4WD, 2005-2011 Dakota 2WD 4WD, Aluminum Suspension Level Kit CNC Strut Spacers For Pick Up

#10

10. EVIL ENERGY Tacoma Leveling Kit

• Material: Aluminum
• Material Type: Aluminum

Best for: Six-lug Tacoma front-and-rear lift.

Why it ranks #10: The Tacoma kit fits listed 6-lug models but lifts the front 3 inches and rear 2 inches, so it does not match a uniform 2-inch lift request.

A three-inch front and two-inch rear lift sets this EVIL ENERGY kit apart for owners of 2005–2023 six-lug Tacoma 2WD or 4WD models. Its 6061-T6 aluminum construction and CNC processing are presented as strength and precision features, while the height split creates a front-and-rear leveling setup.

The forged 6061-T6 aluminum alloy is specified for strength and durability, while CNC automatic processing supports precise hole positioning for installation. The included 12.9-grade bolts receive anodized surface and heat treatment for corrosion resistance. Together, these details point to a spacer kit focused on durable hardware and accurate mounting rather than a package of replacement shocks or springs. The listed vehicle coverage is limited to 2005–2023 Tacoma models with six lugs, in either 2WD or 4WD.

Skip it if you have a five-lug Tacoma; the listed compatibility specifies six-lug models only.

Choose this kit if your 2005–2023 Tacoma is a six-lug 2WD or 4WD model and you want the stated three-inch front, two-inch rear setup. Its application does not cover five-lug Tacomas.

Listed on Amazon as: EVIL ENERGY 3" Front and 2" Rear Leveling Lift Kit, Red