Best Sprinter Lift Kit 2Wd for 2WD Mercedes-Benz Vans

#1 · Best Overall

1. DEALPAREX 2-inch Full Kit

• Weight: 58.8 lb
• Material: Aluminum
• Material Type: Aluminum

Best for: W907 2WD Ground-Clearance Upgrade.

Why it ranks #1: A complete two-inch kit for the 2019-present W907 2500 2WD includes fitting hardware and detailed instructions, matching the core lift-kit use case.

A full 2-inch aluminum spacer kit for the Mercedes-Benz Sprinter W907 2500 2WD, 2019-present, adds ground clearance while providing the fitting kit and detailed instructions in one package. Its coil spring spacers also make room for custom rims and tires, with the listing noting easier travel on surfaces inaccessible to standard-suspension vehicles.

The stated W907 2500 2WD, 2019-present fitment gives owners of that specific van a defined application to check against their vehicle. Aluminum coil spring spacers provide the 2-inch lift and increased ground clearance, supporting the listed aim of easier off-road driving and travel over varied surfaces. The complete fitting kit and detailed instructions keep the required installation materials and guidance together. DEALPAREX identifies the aluminum as ultra-high-density material for long service life; this is a suspension spacer kit, not load-leveling air springs.

Skip it if you need adjustable support while towing or hauling; Air Lift 57801 adds adjustable air springs for the 170-inch-wheelbase Sprinter.

For owners of a Mercedes-Benz Sprinter W907 2500 2WD from 2019 onward seeking a 2-inch spacer lift and added clearance, this full kit suits the stated application; its fitment does not cover every Sprinter configuration.

Listed on Amazon as: Leveling Lift Kit 2 inch 50mm for Mercedes-Benz – Full Kit

#2 · Best Rear Lift

2. DEALPAREX Rear Lift Kit

• Weight: 22.5 lb
• Material: Aluminum
• Material Type: Aluminum

Best for: W907 Rear Lift Components.

Why it ranks #2: This W907 2500 2WD rear kit includes a two-inch lift block, U-bolts, sway-bar links, and brake-line relocation brackets.

A 2-inch rear lift block comes with U-bolts, extended sway-bar links, and several relocation brackets in this DEALPAREX kit for Sprinter W907 2500 2WD models from 2019 onward. That component mix targets rear-lift installation while addressing brake lines, shocks, bump stops, and the listed headlight-leveling or wind-assist sensor bracket.

The rear lift block and U-bolts provide the core lifting hardware, while extended rear sway-bar links and lower shock relocation brackets address suspension components named in the package. Brake-line relocation brackets and bump-stop drop brackets are also included, along with a wind-assist or headlight-leveling sensor bracket. All necessary hardware is listed, supporting a coordinated rear installation workflow. DEALPAREX identifies aluminum construction and states ultra-high-density aluminum supports service life. Fitment is limited to the stated W907 2500 2WD, 2019-present application.

Skip it if you need front lift parts for a 2007-2018 Sprinter 2500 2WD; DEALPAREX’s front kit lists strut and subframe spacers for those years.

For W907 2500 2WD owners from 2019 onward assembling a rear lift, this package groups the block, links, and relocation brackets. It covers the rear only, so it does not supply a complete front-and-rear lift.

Listed on Amazon as: Leveling Lift Kit 2 inch 50mm for Mercedes-Benz – Rear

#3 · Best Front Lift

3. DEALPAREX Front Lift Kit

• Weight: 33 lb
• Material: Aluminum
• Material Type: Aluminum

Best for: Earlier 2500 Front Spacer Lift.

Why it ranks #3: For a 2007-2018 Sprinter 2500 2WD, it includes two-inch strut spacers, a subframe drop, and steering-shaft extension components.

A coordinated set of 2-inch front spacers and extensions distinguishes this DEALPAREX kit for Mercedes-Benz Sprinter 2500 2WD vans from 2007-2018. Alongside strut and subframe spacers, it includes steering-shaft, power-steering-hose, and brake-line provisions, connecting the front lift to related components named in the package.

The front 2-inch strut and subframe drop spacers provide the listed lift, while the included engine and transmission mount components and steering-shaft extension address other named installation points. A low-pressure power steering hose extension and front brake-line relocation brackets are also supplied, helping keep the package focused on front-end components rather than only spacer blocks. The complete fitting kit and detailed instructions support installation workflow. Fitment is specified for Sprinter 2500 2WD vans from 2007-2018, not the later W907 application.

Skip it if you have a 2019-or-newer W907 2500 2WD; DEALPAREX’s W907 full kit is listed for 2019-present vans.

This is for owners of 2007-2018 Sprinter 2500 2WD vans seeking a 2-inch front lift with related extensions and brackets included. It covers the front, so buyers needing a full-vehicle lift must account for the rear separately.

Listed on Amazon as: Leveling Lift Kit 2 inch 50mm for Mercedes-Benz – Front

#4 · Best 170-Inch Support

4. Air Lift 57801 Loadlifter 5000

• Weight: 51 lb

Best for: 170-Inch Wheelbase Hauling Support.

Why it ranks #4: Designed for a 2019-2024 Sprinter 2WD with a 170-inch wheelbase, it offers adjustable 5-100 PSI air springs and up to 5,000 pounds of leveling capacity.

Adjustable air springs with a stated 5,000-pound leveling capacity make the Air Lift 57801 a load-support option for the 2019-2024 Mercedes Sprinter 2WD with a 170-inch wheelbase. The system is intended to level a vehicle when towing or hauling, while its no-drill application and 5-100 PSI adjustment range shape installation and setup.

The Sprinter-exclusive application specifies 2019-2024, 2WD, and a 170-inch wheelbase, narrowing the fitment to that configuration. Air springs adjustable from 5 to 100 PSI let owners tune support, while the stated 5,000-pound leveling capacity addresses rear sag during towing or hauling. Air Lift describes the result as a safer, comfortable ride when carrying or towing loads. A no-drill application avoids drilling for installation, and the system is air-spring support rather than a fixed 2-inch spacer lift.

Skip it if you have a 144-inch-wheelbase Sprinter 2WD; Air Lift 57811 is the listed Loadlifter 5000 application for that wheelbase.

Choose this for a 2019-2024 Sprinter 2WD with a 170-inch wheelbase that needs adjustable support while hauling or towing. Its stated application is wheelbase-specific, so it is not the listed 144-inch-wheelbase version.

Listed on Amazon as: Air Lift 57801 Loadlifter 5000 for Mercedes Sprinter (2019-2024) – 2WD, 170" Wheel Base

#5 · Best 144-Inch Support

5. Air Lift 57811 Loadlifter 5000

• Weight: 50 lb
• Material: Alloy Steel
• Material Type: Alloy Steel

Best for: 144-Inch Wheelbase Hauling Support.

Why it ranks #5: This 2019-2024 2WD, 144-inch-wheelbase option has adjustable 5-100 PSI air springs and up to 5,000 pounds of leveling capacity.

The Air Lift 57811 pairs adjustable air springs with up to 5,000 pounds of leveling capacity for the 2019-2024 Mercedes Sprinter 2WD with a 144-inch wheelbase. Its 5-100 PSI range allows pressure adjustment for precise control, while the no-drill application speaks to installation and the stated towing-or-hauling use.

This Sprinter-exclusive kit is identified for 2019-2024 2WD vans with a 144-inch wheelbase, making wheelbase a central fitment detail. Air springs adjustable from 5 to 100 PSI give the owner a way to tune support, and the stated capacity is up to 5,000 pounds of leveling. Air Lift says the system levels the vehicle while towing or hauling for a safe, comfortable ride. The no-drill application avoids drilling during installation; it is adjustable air support, not a fixed-height spacer lift.

Skip it if you have a 170-inch-wheelbase Sprinter 2WD; Air Lift 57801 is the listed Loadlifter 5000 application for that wheelbase.

Choose this for a 2019-2024 Sprinter 2WD with a 144-inch wheelbase that needs adjustable support for towing or hauling. Its application is wheelbase-specific, so the listed 170-inch-wheelbase version is a different fit.

Listed on Amazon as: Air Lift 57811 Loadlifter 5000 for Mercedes Sprinter (2019-2024) – 2WD, 144" Wheel Base

#6

6. SuperSprings SSR-330-47

• Weight: 5 lb

Best for: Maintenance-Free 2500 Load Support.

Why it ranks #6: Fits 2017-2025 Sprinter 2500 2WD and provides progressive rear load support rated at 900 pounds at 50% compression, not a two-inch lift.

Closed-cell microcellular polyurethane gives these rear SumoSprings progressive support without airlines, compressors, or constant adjustment. The set is specified for 2017-2025 Sprinter 2500 2WD models and compresses as load increases, aiming to reduce rear sag and maintain balanced handling rather than providing a manually adjustable air-spring setup.

The listed 900-pound capacity at 50% compression and progressive response connect the spring action to changing loads: as the springs compress, they are intended to reduce rear sag, improve ride height, and maintain balanced handling. Their one-piece construction attaches on one side as a replacement or upgrade to factory bump stops. Closed-cell microcellular polyurethane and full memory rebound support the stated maintenance-free operation, with no airlines or compressor to install or adjust. Fitment is specifically for Sprinter 2500 2WD, 2017-2025.

Skip it if you need adjustable air pressure for changing towing loads; Air Lift 57801 offers a 5-100 PSI range for a 170-inch-wheelbase Sprinter.

This suits Sprinter 2500 2WD owners from 2017-2025 seeking progressive rear support without an air system. The listed 900-pound capacity is at 50% compression, and fitment does not extend to other stated models.

Listed on Amazon as: SuperSprings Set of Rear SumoSprings fits 2017-2025 Sprinter 2500 (2WD Only) | 900 lb Capacity at 50% Compression | Simple Installation

#7

7. SuperSprings SSR-338-47

• Weight: 1.47 lb

Best for: 3500 and 4500 Rear Support.

Why it ranks #7: Its 900-pound capacity at 50% compression suits specified 3500 and 4500 2WD vans, but it is rear load support rather than a lift kit.

One SumoSprings set covers the listed 2004-2025 Sprinter 3500 and 2017-2025 Sprinter 4500 2WD applications, using progressive rear support without air lines or compressors. Its closed-cell microcellular polyurethane compresses as load increases, with a stated 900-pound capacity at 50% compression and an aim of reducing rear sag.

The broad model-year coverage for Sprinter 3500 and 4500 2WD makes this a distinct application from the 2500-specific SumoSprings listing. Progressive compression is intended to reduce rear sag, improve ride height, and maintain balanced handling as load increases. The one-piece units attach on one side as replacements or upgrades to factory bump stops. Closed-cell microcellular polyurethane, full memory rebound, and maintenance-free operation mean no airlines, compressor, or ongoing pressure adjustment is part of the stated setup.

Skip it if you drive a Sprinter 2500 2WD; SuperSprings SSR-330-47 is the listed SumoSprings set for 2017-2025 2500 models.

For Sprinter 3500 owners from 2004-2025 or Sprinter 4500 owners from 2017-2025, this offers progressive, maintenance-free rear support. Its stated fitment is 2WD and excludes the separately listed 2500 application.

Listed on Amazon as: SuperSprings Set of Rear SumoSprings fits 2004-2025 Sprinter 3500 and 2017-2025 Sprinter 4500 (2WD Only) | 900 lb Capacity at 50% Compression | Simple Installation

#8

8. MaxTrac 702235 Spindles

• Weight: 62 lb

Best for: Forged-Aluminum Spindle Lift.

Why it ranks #8: This product is described as 2WD lift spindles with extended brake lines, but the supplied details do not establish Sprinter compatibility.

Forged-aluminum lift spindles paired with extended brake lines are the defining hardware in MaxTrac’s 2WD kit. The listing identifies the brake lines as DOT compliant, making this a spindle-focused option for buyers seeking those components together; it does not describe a complete lift package or provide a specific Sprinter model-year application.

The forged-aluminum construction is the listed manufacturing feature, while the extended brake lines address the brake-line component included with the lift spindles. DOT compliance is explicitly stated for those lines. Together, these details make the kit relevant to a buyer sourcing spindles and extended lines as a paired upgrade. The supplied listing gives a 2WD designation but no specific Sprinter model years or dimensions, so the stated facts do not establish a particular Sprinter fitment. It is not presented as a complete suspension kit.

Skip it if you want a specified Sprinter 2WD application with included installation hardware; DEALPAREX’s W907 2500 rear kit lists its vehicle fitment and components.

Consider this for a buyer specifically sourcing 2WD lift spindles and extended DOT-compliant brake lines. The supplied details do not identify Sprinter years or a complete kit, so the listing leaves those fitment and package questions unresolved.

Listed on Amazon as: Suspension 702235 2Wd Lift Spindles W/ Extended Brake Lines Dot Aprov.