Best Dirt Bike Hitch For Car: 10 Carriers Compared

#1 · Best Overall

1. VEVOR Motorcycle Carrier

• Load Capacity: 600 lb
• Material: Q235B Steel
• Weight: 61.7 lb

Best for: Long-ramp 600-pound hauler.

Why it ranks #1: Its 600-pound capacity, 47-inch ramp, and included ratchet straps and stabilizer make it a well-equipped fit for a 2-inch receiver.

A 47-inch ramp is the VEVOR carrier’s clearest loading advantage, giving you a longer path to roll a motorcycle onto its 76-by-7-inch platform. The steel rack is rated for 600 pounds and is specified for vehicles with a 2-inch hitch receiver.

The longer ramp can ease the transition from ground to carrier compared with a shorter loading path, while the 76-inch-long, 7-inch-wide platform provides room for positioning a bike. Its 600-pound capacity sets a clear upper load limit, and the 2-inch receiver requirement narrows compatibility to vehicles equipped with that hitch size. VEVOR also lists a recommended installation height of 7.87 to 19.7 inches from the center hole to the ground.

Skip it if you need a specified two-sided loading option; ECOTRIC’s AI-318 lists loading from either side for more approach flexibility.

This VEVOR suits riders who want a long ramp, a 600-pound stated capacity, and defined installation-height guidance. It requires a 2-inch receiver, and buyers wanting a listed ramp-storage arrangement should consider that boundary.

Listed on Amazon as: VEVOR Motorcycle Carrier, 600 LBS Steel Motorcycle Carrier Hitch Mount with 47" Longer Ramp, Scooter Dirt Bike Trailer Hauler with Ratchet Straps and Stabilizer, for Car, Truck with 2" Hitch Receiver

#2 · Best Tilting Design

2. Mockins Tilting Rack

• Load Capacity: 500 lb
• Material: Steel
• Weight: 78 lb

Best for: Tilting carrier with tie-down kit.

Why it ranks #2: The 500-pound steel carrier has an 83-by-6-inch frame, tilting ramp, hitch stabilizer, hitch lock, and four ratchet straps.

The Mockins rack combines a tilting ramp with a broad stated 5.5-inch tire allowance, making it relevant for dirt bikes, scooters, eBikes, and other listed bike types. Its 83-by-6-inch steel frame supports up to 500 pounds and fits vehicles with a 2-inch receiver.

The tilting ramp is intended to ease mounting and dismounting, while four heavy-duty ratchet straps and four loop straps give you listed tie-down hardware for securing a bike. A hitch stabilizer and lock are included alongside a license plate holder and accessory storage bag. The 83-inch frame, 5.5-inch tire limit, and 500-pound capacity give buyers concrete dimensions and load boundaries to check.

Skip it if you need a listed capacity above 500 pounds; VEVOR’s TD-1004-03 specifies a 600-pound load limit and a 47-inch ramp.

This Mockins suits riders seeking a tilting ramp and bundled tie-down hardware for a compatible bike under 500 pounds. Confirm that the 5.5-inch tire allowance and 83-inch frame work for your bike and storage space.

Listed on Amazon as: Mockins 83" Tilting Dirt Bike Carrier Hitch Mount Rack w/ 500 Lbs. Capacity

#3 · Best Included Kit

3. Mockins Tilting Carrier

• Load Capacity: 500 lb
• Material: Steel
• Weight: 75 lb

Best for: Strap-equipped tilting carrier.

Why it ranks #3: This 500-pound tilting carrier includes a hitch lock, stabilizer, license plate holder, four ratchet straps, and four loop straps.

A tilting ramp and included tie-down hardware make the Mockins carrier a complete loading-and-securing setup for compatible bikes. Its 83-by-6-inch steel frame supports up to 500 pounds, accommodates tires up to 5.5 inches wide, and fits 2-inch receivers.

The tilting ramp is intended to make mounting and dismounting easier, while four heavy-duty ratchet straps and four loop straps provide multiple points for securing a loaded bike. A hitch stabilizer and hitch lock are also included, adding specified hardware at the receiver connection. The 83-inch frame and 5.5-inch tire-width limit help define which bikes fit, and the 500-pound capacity sets the load boundary.

Skip it if you need a shorter listed carrier; VEVOR’s TD-1004-03 measures 77 inches long, rather than this rack’s 83 inches.

This Mockins is a match for riders wanting a tilting ramp and included securing hardware for a bike within the 500-pound and 5.5-inch tire limits. Its 83-inch frame is a consideration for available storage and vehicle space.

Listed on Amazon as: Mockins 83" Tilting Motorcycle Hitch Carrier with Ramp w/ 500 Lbs. Capacity

#4 · Highest Capacity

4. RIGMEC Motorcycle Carrier

• Load Capacity: 600 lb
• Material: Carbon Steel, Metal
• Weight: 19 kg

Best for: 600-pound carrier with anti-tilt lock.

Why it ranks #4: The 600-pound steel carrier includes an anti-tilt locking device, longer ramp, and four ratchet straps for securing the load.

An anti-tilt locking device is a key feature of this RIGMEC carrier, paired with a longer ramp for loading motorcycles, scooters, and off-road dirt bikes. Its steel frame is rated for 600 pounds and is listed for cars and trucks with 2-inch hitch receivers.

The anti-tilt locking device addresses movement at the hitch connection, while the supplied description also lists four ratchet straps and hook stabilizers to reduce wobbling and add security during transport. A ramp supports loading, and the 77-by-32.5-inch dimensions define the carrier’s footprint. Its 600-pound capacity and 2-inch receiver requirement help buyers check load and vehicle compatibility before installation.

Skip it if you need a specified ramp length before choosing; VEVOR’s TD-1004-03 lists a 47-inch ramp for evaluating the loading approach.

Pick RIGMEC for a bike within 600 pounds when anti-tilt hardware, straps, and hook stabilizers are priorities. It fits the listed 2-inch receiver setup; buyers who need a measured ramp length should note that none is provided.

Listed on Amazon as: Motorcycle Carrier, 600 LBS Steel Motorcycle Carrier Hitch Mount with Longer Ramp, Scooter Dirt Bike Trailer Hauler, for Car, Truck with 2" Hitch Receiver

#5 · Widest Tire Limit

5. Goplus Motorcycle Carrier

• Load Capacity: 600 lb
• Material: Steel
• Weight: 98 lb

Best for: Wide-tire steel carrier.

Why it ranks #5: Its stated tire limit reaches 7.5 inches, and the steel carrier supports 600 pounds; the listing recommends not exceeding 55 mph.

A listed tire fit up to 7.5 inches wide gives the Goplus carrier a broad stated compatibility point for wider-tire bikes. The steel rack supports up to 600 pounds, includes two straps and a loading ramp, and fits vehicles equipped with a 2-inch receiver.

The 7.5-inch tire-width specification helps buyers assess whether a wider tire can sit on the carrier, while the 600-pound capacity sets the maximum listed load. A ramp and two straps are included for loading and securing the motorcycle. The steel construction is described as high-strength, and the listing recommends not exceeding 55 mph while carrying a motorcycle, making travel speed an explicit operating consideration.

Skip it if you require a higher stated speed recommendation; the supplied listing caps loaded travel at 55 mph, while RIGMEC lists no speed figure.

This Goplus suits riders whose tires need the listed 7.5-inch width allowance and whose bike stays within 600 pounds. Account for its 55-mph recommendation, two included straps, and 2-inch receiver requirement.

Listed on Amazon as: Goplus Motorcycle Hitch Carrier, 600LBS Motorcycle Carrier Hitch Mount with 2 Straps, Loading Ramp, Dirt Bike Trailer, Heavy Duty Motor Cycle Rack, Fit Up to 7.5” Wide Tire

#6

6. ECOTRIC Motorcycle Carrier

• Load Capacity: 500 lb
• Material: Steel

Best for: Two-sided loading flexibility.

Why it ranks #6: It fits 2-inch square receivers across listed hitch classes II through V, supports 500 pounds, and allows loading from either side.

A ramp that can be loaded from either side gives the ECOTRIC carrier useful flexibility when vehicle placement or available space makes one approach awkward. Its steel platform supports up to 500 pounds and fits 2-inch square receivers across Class II, III, IV, and V trailer hitches.

The included ramp lets you roll a bike onto the frame rather than lift it into position, while the two-sided loading option can make setup more convenient in a tight parking area. A 500-pound capacity covers the product’s stated load limit, and the 2-inch receiver compatibility spans several hitch classes. The steel construction is specified as resistant to flaking, scratching, fading, and wear, which supports repeated use and outdoor handling.

Skip it if you need a stated long ramp length or a higher listed capacity; VEVOR’s TD-1004-03 specifies a 47-inch ramp and 600-pound capacity.

Choose this ECOTRIC for a bike within its 500-pound limit when two-sided loading and broad 2-inch receiver-class compatibility suit your vehicle. Check your loading space and approach before choosing, since no ramp length is listed.

Listed on Amazon as: ECOTRIC 500LB Hitch Mount Motorcycle Carrier Transportation Racks Hitch

#7

7. Black Widow Steel Carrier

• Load Capacity: 500 lb
• Material: Steel
• Weight: 57 lb

Best for: Traction-coated steel loading track.

Why it ranks #7: The 500-pound steel carrier fits a 2-inch Class III or IV hitch and has a traction-coated track and ramp.

Grit-coated surfaces on both the track and ramp give this Black Widow carrier a specifically textured loading path for motorcycles, dirt bikes, and scooters. Its powder-coated 14-gauge steel construction supports up to 500 pounds and fits Class III or IV 2-inch hitches.

The traction coating on both ramp and track is intended to help with loading and unloading, while the ramp attaches to the right side of the carrier. That fixed-side arrangement makes the loading approach a practical consideration when positioning the vehicle. The steel rack’s 500-pound capacity defines the load limit, and its Class III or IV 2-inch hitch compatibility identifies the receiver types listed for installation.

Skip it if you need to load from either side; ECOTRIC’s AI-318 lists loading options from both sides of its carrier frame.

Choose this Black Widow if a traction-coated steel loading surface suits your bike and a right-side ramp approach works at your parking spot. Keep the 500-pound limit and Class III or IV 2-inch receiver fit in mind.

Listed on Amazon as: Black Widow Motorcycle Carrier, Ramp, 500 lb Cap,

#8

8. IRILIA Tilting Carrier

• Load Capacity: 500 lb
• Material: Steel
• Weight: 60 lb

Best for: Tilting ramp for mixed bikes.

Why it ranks #8: Its 500-pound capacity and tilting ramp suit dirt bikes, while the 79-by-6-inch platform is listed for tires up to 4.3 inches.

The IRILIA carrier pairs a tilting-ramp design with a 79-by-6-inch loading platform, giving riders a roll-on setup for motorcycles, dirt bikes, scooters, and eBikes. It fits standard 2-inch receivers and supports up to 500 pounds, with fat tires listed up to 4.3 inches wide.

The tilting ramp is intended to simplify loading and unloading, while the 79-inch platform provides a defined loading area for several bike types. Compatibility with standard 2-inch receivers covers the stated fit for cars, SUVs, and trucks. Its 500-pound capacity and 4.3-inch maximum fat-tire width are practical boundaries to check against a bike before selecting this carrier; the supplied listing identifies steel construction.

Skip it if you need clearance for tires wider than 4.3 inches; Mockins’ MA-HM-DBC-83-TILT-96 lists support for tires up to 5.5 inches.

Choose IRILIA if your motorcycle, scooter, or eBike fits its 500-pound and 4.3-inch tire boundaries and you want a tilting ramp. The standard 2-inch receiver requirement is the key vehicle-fit consideration.

Listed on Amazon as: Tilting Motorcycle Hitch Carrier with Ramp

#9

9. Black Widow Aluminum Carrier

• Load Capacity: 400 lb
• Material: Aluminum
• Weight: 43 lb

Best for: Lightweight aluminum bike carrier.

Why it ranks #9: Its aluminum construction weighs 43 pounds and the six-foot ramp eases loading, but capacity is lower at 400 pounds.

Aluminum construction keeps the Black Widow carrier’s listed weight to 43 pounds, making the rack itself lighter to handle than many steel options. Its six-foot ramp supports a gradual roll-on approach for one dirt bike, eBike, or fat-tire bike within the 400-pound load limit.

The six-foot ramp creates a gentler incline for loading and locks onto the carrier for self-storage, so it stays with the rack between uses. The track can attach to either side, letting you choose a loading approach suited to your parking position. It fits 2-inch Class III or IV receivers and accommodates wheels up to 5.5 inches wide, while its 400-pound limit defines the supported load.

Skip it if you carry a bike above 400 pounds; VEVOR’s TD-1004-03 lists a 600-pound capacity and a 47-inch ramp.

Pick this Black Widow for a single compatible bike when a lighter aluminum rack and long, self-storing ramp matter. Keep the 400-pound capacity, 5.5-inch wheel-width limit, and Class III or IV receiver requirement in view.

Listed on Amazon as: Black Widow Aluminum Dirt Bike Hitch Carrier, 400 lb, Extra-Long 6 Ft Ramp

#10

10. Yoloyakidra Two-Bike Carrier

• Load Capacity: 600 lb
• Material: Alloy Steel

Best for: Two-bike dual-rail carrier.

Why it ranks #10: Although rated for 600 pounds and described for two motorcycles, its 75.1-by-53.6-inch double-rail layout is less clearly suited to a typical car.

A dual-rail layout and stated capacity for two motorcycles distinguish this Yoloyakidra hitch carrier from single-bike racks. Its alloy-steel frame has a 600-pound load limit, and the detachable ramp can be connected to the carrier when it is not being used for loading.

The detachable ramp gives you a loading path without requiring heavy lifting, then attaches to the carrier for transport when idle. The product lists capacity for two motorcycles and a 600-pound overall load limit, making both the bike count and combined load important planning boundaries. Its 75.1-by-53.6-inch dimensions show a notably wide footprint, so vehicle space and the rack’s physical width deserve attention before use.

Skip it if you need a narrower listed carrier; RIGMEC’s 9C7O4EBHV measures 32.5 inches wide, compared with this rack’s 53.6 inches.

Consider this Yoloyakidra for carrying two motorcycles within the 600-pound limit when a dual-rail setup is useful. Its 53.6-inch width is a major space consideration, and the supplied details do not specify receiver size.

Listed on Amazon as: Heavy Duty Motorcycle Carrier Hitch Mount for 2 Bikes 600 LBS Load Capacity, Scooter Dirt Bike Trailer Hauler with Ramp, Ratchet Straps and Stabilizer