Best 2 9 16 Axle Nut Socket for Wheel Bearing Locknuts

#1 · Best Overall

1. Powerbuilt 647067 Socket

• Material: Carbon Steel
• Material Type: Carbon Steel
• Weight: 1.5 lb

Best for: Dana 60 Dodge hub service.

Why it ranks #1: Its 2-9/16-inch, six-point rounded profile is specifically listed for 1990–1993 Dodge trucks with Dana 60 manual hubs.

A rounded 2-9/16-inch, six-point socket targets 1990–1993 Dodge trucks with Dana 60 manual hubs, giving owners a specific tool for wheel-bearing locknut work. Its heat-treated carbon steel construction adds a durable material choice for repeated garage or shop service on the application listed.

The six-point rounded profile is specified for the listed Dana 60 manual-hub locknut, while the application range narrows the choice to 1990–1993 Dodge trucks. That specificity helps avoid treating it as a general-purpose axle socket. Heat-treated carbon steel supports a durable service tool, and the 1.5-pound listed weight is relevant when keeping a dedicated socket in a shop kit. The supplied information does not specify a drive size, so confirm the tool setup against your equipment.

Skip it if you need a stated drive size or coverage beyond the listed Dodge Dana 60 application; OTC 1904 specifies a 3/4-inch square drive.

A Dodge owner or technician servicing a 1990–1993 Dana 60 manual-hub truck gets a specifically matched rounded locknut socket. It is a focused choice, not a multi-size set, and the drive size is not stated in the supplied specifications.

Listed on Amazon as: Powerbuilt 2-9/16 Inch Rounded Wheel Bearing Lock Nut Socket, 6 Point Hex, Dodge Trucks Manual Hubs – 647067

#2 · Best 3/4-Inch Drive

2. OTC 1904 Socket

• Material: Alloy Steel
• Material Type: Alloy Steel
• Weight: 0.93 g

Best for: Manual 3/4-inch drive service.

Why it ranks #2: The listing specifies a 2-9/16-inch six-point opening, five-inch depth, and compatibility with 3/4-inch square-drive manual tools.

A five-inch-deep, 2-9/16-inch six-point opening gives the OTC 1904 a clearly specified reach and size for wheel-bearing locknuts. Its 3/4-inch square drive is intended for manual tools, making it a direct option for technicians who already use that drive setup for locknut removal or installation.

The 2-9/16-inch opening is measured flat to flat, a practical detail when checking a locknut before selecting the socket. Its five-inch depth provides the stated socket length for reaching the work, while the 3/4-inch square drive identifies compatible manual-tool equipment. OTC specifies high-strength steel that resists rounding under high torque loads, supporting use on demanding locknuts. The manual-tool-only limitation matters: this is not specified for powered impact tools.

Skip it if you need an impact-rated socket; Sunex Tools SUN10603 specifies chrome-moly steel and compatibility with hand ratchets and breaker bars.

Choose the OTC 1904 for manual 3/4-inch-drive work on 2-9/16-inch wheel-bearing locknuts, especially when its five-inch depth suits the job. Its stated manual-tool-only use makes it a poor fit for an impact-wrench workflow.

Listed on Amazon as: OTC 1904 2-9/16" 6-point Wheel Bearing Locknut Socket – 3/4" Drive

#3 · Best 1/2-Inch Drive

3. CTA Tools 4186 Socket

• Material: Metal
• Material Type: Metal
• Weight: 1.3 lb

Best for: Dodge round-nut service.

Why it ranks #3: This 2-9/16-inch rounded locknut socket is designed for Dodge trucks and lists 1/2-inch-drive tools and a heavy-duty design.

CTA Tools specifies a 2-9/16-inch round locknut socket for Dodge trucks, giving owners a focused tool for removing and installing round wheel-bearing nuts. Its listed 1/2-inch drive helps buyers match the socket to a familiar shop ratchet or breaker bar when preparing that service.

The 2-9/16-inch size and round-nut description establish the intended fastener, while the Dodge truck application points to a specific vehicle-service use. A 1/2-inch drive makes it straightforward to plan around compatible hand tools. CTA describes the socket as heavy duty and made of metal, supporting a durable role in a specialty-tool kit. The supplied facts do not narrow the Dodge application to model years or hub type, so buyers should treat it as less specific than a year-and-hub-matched tool.

Skip it if you need a year- and hub-specific Dodge listing; Powerbuilt 647067 names 1990–1993 Dana 60 manual hubs.

This CTA socket fits a buyer seeking a 1/2-inch-drive tool for 2-9/16-inch round locknuts on Dodge trucks. Its application details are broad, so it offers less vehicle-specific guidance than a year-and-hub-matched listing.

Listed on Amazon as: CTA Tools 4186 Dodge Trucks 2 9/16" Round Wheel Bearing Locknut Socket

#4 · Best Size Range

4. Sunex Tools SUN2847 Set

• Material: Metal
• Material Type: Metal
• Weight: 13.61 g

Best for: Seven-size shop socket set.

Why it ranks #4: The seven-piece 1/2-inch-drive set includes a 2-9/16-inch six-point socket plus several other listed locknut sizes.

Seven sockets cover both rounded and six-point configurations, including a 2-9/16-inch rounded option, giving the Sunex Tools 2847 useful breadth for wheel-bearing locknut service. Its 1/2-inch drive works with a ratchet or breaker bar, while the blow-molded case keeps the set together between jobs.

The size list spans several common locknuts, with 2-9/16 inches included in the 6R rounded group and additional six-point sizes also supplied. That assortment can reduce tool changes when a shop handles different applications. CR-MO alloy steel is specified for long life, and the heavy-duty blow-molded case provides a place to store the seven-piece set. The stated 1/2-inch ratchet or breaker-bar compatibility suits hand-tool workflows, not an explicitly listed impact-wrench setup.

Skip it if you need a single 2-9/16-inch eight-point socket for square-head fasteners; Sunex Tools SUN10603 lists that geometry.

The Sunex 2847 suits a shop wanting several wheel-bearing locknut sizes, including a 2-9/16-inch rounded option, organized in a case. Its stated 1/2-inch hand-tool setup is the boundary for impact-tool users.

Listed on Amazon as: SUNEX TOOLS 2847 1/2-Inch Drive Wheel Bearing Lock Nut Set, 7 Piece

#5

5. Nebnickers 2-9/16 Socket

• Material: Alloy Steel
• Material Type: Alloy Steel

Best for: Coated six-point truck socket.

Why it ranks #5: Its 2-9/16-inch, six-point design is intended for truck wheel bearing locknuts, with alloy steel and a corrosion-resistant coating listed.

An industrial-strength black powder coating distinguishes this 2-9/16-inch, six-point truck wheel-bearing socket and is stated to resist chipping or fading. Its size and locknut application suit buyers seeking one dedicated socket for installation and removal, rather than a multi-size axle-nut set.

The six-point geometry grips the sides of fasteners rather than their corners, which the listing says reduces the chance of wear or rounding during locknut work. High-tensile alloy steel supplies the stated durable material, while the black powder coating is intended to resist chipping and fading through use. The application is truck wheel-bearing locknuts, with a 2-9/16-inch size; the supplied details do not identify a drive size, so plan around that missing specification.

Skip it if you need a stated drive size before choosing; OTC 1904 lists a 3/4-inch square drive for manual tools.

This nebnickers socket suits a buyer servicing 2-9/16-inch truck wheel-bearing locknuts who values six-point side contact and a corrosion-resistant coating. It is a single-size option, and the drive specification is not supplied.

Listed on Amazon as: 2-9/16 Inch, 6-Point Truck Axle Wheel Bearing Socket, for Axle Nut Socket Set (2-9/16" 6PT)

#6 · Best 8-Point Option

6. Sunex Tools SUN10603 Socket

• Material: Chrome Molybdenum Steel
• Material Type: Chrome Molybdenum Steel
• Weight: 1.8 lb

Best for: Eight-point hand-tool socket.

Why it ranks #6: This 2-9/16-inch, eight-point socket uses chrome molybdenum steel and a 1/2-inch drive for square-head fasteners.

An eight-point square design makes this Sunex Tools 2-9/16-inch socket a specific option for square-head fasteners and pipe plugs as well as wheel-bearing locknuts. The 1/2-inch drive and stated hand-tool compatibility suit ratchets and breaker bars, while chrome-molybdenum steel addresses high-torque service demands.

The eight-point geometry is intended for square-head fasteners and pipe plugs, making its use distinct from a conventional six-point locknut socket. At 2-9/16 inches with a 1/2-inch drive, it targets buyers whose fastener and hand-tool setup match those dimensions. Sunex specifies chrome-molybdenum alloy steel for durability under high-torque impact use, yet its compatibility details name hand-operated ratchets and breaker bars. Follow that stated hand-tool guidance when planning the workflow.

Skip it if you want a multi-size set rather than one socket; Sunex Tools 2847 includes seven locknut sizes, including 2-9/16 inches.

This Sunex socket fits a buyer handling 2-9/16-inch wheel-bearing locknuts, square-head fasteners, or pipe plugs with a 1/2-inch hand tool. Its single size and stated hand-tool compatibility define the selection boundary.

Listed on Amazon as: Sunex Tools – SOC 2-9/16 1/2D IMP LCKNT WHL BRNG 8PT DP

#7

7. OEMTOOLS 25473 Socket

• Material: Alloy Steel
• Material Type: Alloy Steel

Best for: Eight-point truck locknut service.

Why it ranks #7: It is a 2-9/16-inch, eight-point truck wheel bearing locknut socket, though its description also mentions inner tie-rod service.

An eight-point, 2-9/16-inch configuration puts the OEMTOOLS 25473 in view for buyers servicing large truck wheel-bearing locknuts and axle nuts. The listing also identifies inner tie-rod service on rack-and-pinion steering assemblies, giving this manual socket a second stated automotive use beyond wheel-bearing work.

The 2-9/16-inch size is intended for large wheel-bearing locknuts and axle nuts common on many trucks and SUVs, while the eight-point design is also listed for inner tie rods on rack-and-pinion assemblies. That combination can make one socket relevant across two service tasks, provided the fastener geometry matches. Alloy steel is the specified material. The supplied information does not state a drive size, so users should consider that limitation when planning tool compatibility.

Skip it if you require a stated drive size for your ratchet; Sunex Tools SUN10603 specifies a 1/2-inch drive for its 2-9/16-inch eight-point socket.

The OEMTOOLS 25473 suits a mechanic handling 2-9/16-inch locknuts or the listed rack-and-pinion inner tie-rod task. Its two stated applications are useful, but the missing drive-size specification limits setup planning.

Listed on Amazon as: OEMTOOLS 25473 2-9/16 Inch Truck Wheel Bearing Locknut Socket, 8-Point | Remove & Replace Large Wheel Bearing Locknuts & Axle Nuts Common on Many Trucks & SUVS | Saves Time & Effort

#8

8. Performance Tool W83245 Socket

• Material: Carbon Steel
• Material Type: Carbon Steel
• Weight: 1.2 lb

Best for: Dodge manual-hub locknut work.

Why it ranks #8: The title gives a 2-9/16-inch size, but its feature text instead says 2-3/8 inches, making the actual fit unclear.

A stated 1/2-inch drive sets the Performance Tool W83245 apart for buyers whose ratchet or breaker bar uses that size. The listing connects it to 1990–1993 Dodge trucks with Dana 60 manual hubs, offering a dedicated locknut tool for that vehicle-specific service rather than broad axle-nut coverage.

The 1/2-inch drive identifies the compatible hand-tool setup, and the listed Dodge Dana 60 manual-hub application gives buyers a defined service target. Its steel construction is presented as durable for rough working conditions, supporting repeat garage use. There is a material specification conflict to account for: the title says 2-9/16 inches, while the key features state a 2-3/8-inch rounded socket. Resolve that discrepancy before selecting it for a locknut.

Skip it if you need an unambiguous 2-9/16-inch size; Powerbuilt 647067 states that size for the same listed Dodge Dana 60 application.

The W83245 may suit a 1/2-inch-drive user working on the listed Dodge manual-hub trucks, but its conflicting size descriptions are a real selection boundary. Resolve the 2-9/16 versus 2-3/8-inch discrepancy first.

Listed on Amazon as: Performance Tool W83245 1/2 in. Drive 2-9/16 in. Lock Nut Socket

#9

9. Yoursme Spindle Socket Set

• Material: Chrome Molybdenum Steel
• Material Type: Chrome Molybdenum Steel

Best for: Multi-size heavy-duty impact work.

Why it ranks #9: This eight-piece impact set covers 2-1/16 to 2-1/2 inches, so its listed range does not include the requested 2-9/16-inch size.

Eight six-point impact sockets spanning 2-1/16 to 2-1/2 inches give the Yoursme set broader size coverage than a single axle-nut socket. Its 3/4-inch drive targets compatible impact wrenches and ratchets, making it relevant to automotive and heavy-duty repair involving large spindle or axle nuts.

The eight-piece SAE range covers common large spindle and axle-nut sizes from 2-1/16 through 2-1/2 inches, helping a shop keep several listed sizes in one set. Chrome-molybdenum steel is specified for the sockets, and the 3/4-inch drive matches compatible impact wrenches and ratchets for high-torque work on stubborn or seized nuts. The range stops at 2-1/2 inches, so it does not include a 2-9/16-inch socket for buyers who need that exact size.

Skip it if you need a 2-9/16-inch socket; Sunex Tools 2847 includes that size in its 1/2-inch-drive set.

The Yoursme set suits automotive or heavy-duty users handling several large spindle and axle-nut sizes with 3/4-inch-drive tools. Its listed range ends at 2-1/2 inches, so it is not the pick for a 2-9/16-inch nut.

Listed on Amazon as: Spindle Axle Nut Impact Socket Set 3/4 Drive, 8-Pc, 6-Point, 2-1/16"–2-1/2"

#10

10. Aiourx Axle Socket Set

• Material: Chrome Molybdenum Steel
• Material Type: Chrome Molybdenum Steel

Best for: Large six-point impact socket set.

Why it ranks #10: Its eight-piece, 3/4-inch-drive impact set covers 2-1/16 to 2-1/2 inches, below the requested 2-9/16-inch size.

Heat-treated forged CR-MO steel and a six-point profile define this Aiourx eight-piece 3/4-inch-drive impact set for large automotive and mechanical nuts. Its listed SAE range runs from 2-1/16 to 2-1/2 inches, with the high-torque flat-side contact aimed at large repair work.

The six-point design contacts the stronger flat sides of a nut or bolt head rather than its corners, supporting the set's stated high-torque use. Forged, heat-treated chrome-molybdenum steel is specified for durability and abrasion resistance, including high-temperature environments. Eight shallow sockets cover 2-1/16 to 2-1/2 inches and use a 3/4-inch drive for large repairs and equipment maintenance. The range does not reach 2-9/16 inches, an important limit for that exact fastener size.

Skip it if you need a 2-9/16-inch socket; Sunex Tools 2847 lists that size in its 1/2-inch-drive set.

The Aiourx set suits mechanics and equipment users needing several large SAE sizes for 3/4-inch-drive impact work. Its shallow six-point sockets stop at 2-1/2 inches, so a 2-9/16-inch nut falls outside its listed range.

Listed on Amazon as: 8 Piece 3/4”Drive Shallow Impact Socket Set, 2-1/16”-2-1/2”Axle Nut Sockets, SAE, CR-MO, 6 Point, Tools for Removing Mechanical Nuts, Large Automotive Repairs, Agricultural implement