Best Led Truck Tail Lights for Trailers, RVs, and Pickups

Best Led Truck Tail Lights

A strong LED truck tail light should match your truck’s 12-volt system, provide the signals you need, and suit its mounting space; the Partsam 75 LED Truck Tail Light Bar is a versatile choice for trucks, pickups, trailers, and RVs. This roundup compares ten options, including dual-color bar lights, combination stop-and-turn units, oval grommet-mounted lamps, and a flexible tailgate strip. The key differences are signal functions, form factor, stated waterproof protection, and what comes in the package.

Some products are designed for broad towing use, while others suit a particular installation style or add a reverse-light function. Check your existing wiring, mounting opening, and required signals before choosing: a light’s vehicle compatibility list alone does not confirm that it will fit your truck’s specific installation.

The Partsam 75 LED Truck Tail Light Bar leads because its two-light set is specified for 12V DC and lists trucks, pickups, trailers, RVs, and other vehicles among its compatible uses. Each bar combines red, amber, and white LEDs for running, brake, turn, and reverse lighting, and the listing specifies an IP68 waterproof rating. It is a practical starting point for a broad range of truck and towing setups, provided its surface-mount design and wiring suit your vehicle.

Our Top Picks

Partsam 75 LED BarBest Overall

Partsam 75 LED Bar

The two-bar 12V set lists trucks, pickups, trailers, and RVs, with red, amber, and white lighting and an IP68 waterproof rating.

View on Amazon
WUSHIXAN 75 LED BarHigh LED Count

WUSHIXAN 75 LED Bar

Its 75 LEDs split among red, amber, and white provide running, brake, turn, and reverse functions; the listing specifies a 12V waterproof design.

View on Amazon
Nilight TL-44 KitComplete Signal Set

Nilight TL-44 Kit

The two-light kit includes red running and brake, amber turn, and white reverse lighting, plus a wiring manual and a stated two-year warranty.

View on Amazon

Compare the Truck Tail Light Options

#ProductLens MaterialVoltageCompatible with Vehicle TypeBuy
1Polycarbonate12 VBus, Car, Snowmobile, Trailer, Truck, UTV, VanView on Amazon
2Polycarbonate12 VLoader, RV, Truck, engineering vehicles…View on Amazon
3
Nilight TL-44 Kit3. Nilight TL-44 KitComplete Signal Set
Polycarbonate30 VTruckView on Amazon
4
MAXXHAUL Square Lights4. MAXXHAUL Square LightsLicense Plate Light
Acrylic12 VRV, Trailer, Truck, Vans, SUV Boat, FlatbedView on Amazon
5—12 VCar, Golf Cart, TruckView on Amazon
6
Partsam 17-Inch Bar6. Partsam 17-Inch BarLow-profile wide-trailer bar
Plastic12 VTrailer, RV, Truck, Tractor, etcView on Amazon
7
WahMOTOTin Oval Lights7. WahMOTOTin Oval LightsSmoked oval halo lighting
Polycarbonate12 V DCTrucks, trailers, tractors…View on Amazon
8
RUNHWEE Oval Lights8. RUNHWEE Oval LightsCompact red oval trailer lamps
Polycarbonate12 V DCBoat, Car, Trailer, TruckView on Amazon
9
Partswcgg Round Lights9. Partswcgg Round LightsDual-color round trailer lights
Polycarbonate12 VUniversal FitsView on Amazon
10
PerfecTech Smoke Bars10. PerfecTech Smoke BarsSlim smoke-lens light bars
Polycarbonate12 VATVView on Amazon

Detailed Reviews: Best Led Truck Tail Lights

Partsam 75 LED Bar

#1 · Best Overall

1. Partsam 75 LED Bar

  • Lens Material: Polycarbonate
  • Voltage: 12 V
  • Compatible with Vehicle Type: Bus, Car, Snowmobile, Trailer, Truck, UTV, Van

Best for: 12V surface-mount replacement.

Why it ranks #1: The two-bar 12V set lists trucks, pickups, trailers, and RVs, with red, amber, and white lighting and an IP68 waterproof rating.

Two 75-LED bars come in the Partsam package, giving a buyer a matched pair for a 12-volt towing vehicle. Their red, amber, and white LEDs cover running, brake, turn, and reverse functions, while the listed surface-mount format suits owners seeking bar-style rear lighting across trucks, trailers, campers, and boats.

The 75-LED layout combines red, amber, and white light for running, braking, turning, and reversing, so one bar handles several rear-signal roles. Partsam specifies a 12V DC supply and surface mounting, giving buyers a defined electrical format and installation style to plan around. The package includes two bars, and the stated vehicle range spans pickups, RVs, utility trailers, flatbeds, boats, and other listed vehicles. The IP68 designation identifies its waterproof rating.

Pros
  • Package includes two 75-LED light bars
  • Red, amber, and white signal colors
  • 12V DC and surface-mount format
  • IP68 waterproof rating
Cons
  • The listing specifies 12V DC, limiting use to installations with that supply.

Skip it if you need a flush-mounted lamp rather than a surface-mounted bar; the Partsam listing specifies surface mounting.

This pair suits owners fitting 12V DC surface-mounted bars to a pickup, trailer, RV, or boat. Its bar format and listed voltage are the key installation boundaries, so plan around both before choosing it.

Full product details
BrandPartsam
ColorBlack
Compatible with Vehicle TypeBus, Car, Snowmobile, Trailer, Truck, UTV, Van
Included Components2pcs 75 LED Truck Tail Light Bars
Lens ColorClear+Red+Amber Lens
Lens MaterialPolycarbonate
ManufacturerPartsam
Part NumberGTCV-0556613801
Manufacturer Warranty Description1 year for quality issue
Special FeatureWaterproof
Voltage12 volts
Wattage15 watts

Listed on Amazon as: Partsam 2Pcs 75 LED Truck Tail Light Bar Waterproof 12V Turn Signal Brake Reverse Running Lights Taillight IP68 for Boat Snowmobile Utility Trailer Flatbed Trucks Bed Pickups RV Camper UTV UTE Vans

View on Amazon
WUSHIXAN 75 LED Bar

#2 · High LED Count

2. WUSHIXAN 75 LED Bar

  • Lens Material: Polycarbonate
  • Voltage: 12 V
  • Compatible with Vehicle Type: Loader, RV, Truck, engineering vehicles…

Best for: Multi-function trailer lighting.

Why it ranks #2: Its 75 LEDs split among red, amber, and white provide running, brake, turn, and reverse functions; the listing specifies a 12V waterproof design.

A 75-LED array split evenly among red, amber, and white gives this WUSHIXAN bar distinct colors for tail, turn, and reverse signaling. Its 12-volt specification and listed compatibility with trucks, trailers, RVs, loaders, and flatbeds make it a broad-use option for vehicle owners seeking several rear-light functions in one bar.

The 25 red, 25 amber, and 25 white LEDs assign separate colors to key rear signals, helping other drivers distinguish braking, turning, and reversing. A clear polycarbonate lens presents those lights, while ABS housing and a sealed lens are specified as waterproof, dustproof, and shock-resistant for exposure to road conditions. The 12-volt connection supports the listed vehicle types, including trucks, trailers, and RVs; the supplied details do not specify a mounting method or wiring procedure.

Pros
  • 75 LEDs divided into 25 red, 25 amber, and 25 white
  • Provides turn, running, brake, and reverse lighting
  • 12-volt specification
  • Waterproof, dustproof, shock-resistant ABS housing and sealed PC lens
Cons
  • The supplied specifications do not state the bar's dimensions or mounting method.

Skip it if you need a stated bar length or mounting method before planning installation; the supplied details do not provide either.

Choose this WUSHIXAN bar if your truck, trailer, or RV needs red, amber, and white rear signals in one 12-volt unit. Check your installation plan against the bar's unstated dimensions and mounting details.

Full product details
BrandWUSHIXAN
Color2Pcs Tail Light – A
Compatible with Vehicle TypeLoader, RV, Truck, engineering vehicles, flatbed, trailers
Included ComponentsRear Lights
Lens ColorClear+Red+Amber Lens
Lens MaterialPolycarbonate
ManufacturerWUSHIXAN
Part NumberDHL-D
Manufacturer Warranty Description1
Model NumberDHL-D
Model Year2025
Special FeatureWaterproof
Voltage12 volts
Wattage15 watts

Listed on Amazon as: 75 LED Truck Tail Light Bar, Turn Signal Running Brake Reverse LED Trailer Lights, Waterproof Taillight for Truck Boat Snowmobile Trailer Pickup RV Camper UTV UTE Vans

View on Amazon
Nilight TL-44 Kit

#3 · Complete Signal Set

3. Nilight TL-44 Kit

  • Lens Material: Polycarbonate
  • Voltage: 30 V
  • Compatible with Vehicle Type: Truck

Best for: Framed multi-signal trailer kit.

Why it ranks #3: The two-light kit includes red running and brake, amber turn, and white reverse lighting, plus a wiring manual and a stated two-year warranty.

A sturdy iron outer frame sets Nilight’s two-light kit apart, protecting each clear polycarbonate lens while 40 LEDs supply red, amber, and white signals. The combination covers running, brake, turn, and reverse lighting, giving truck owners a single kit with several distinct rear-light functions.

Each light has 40 LEDs, with white reverse, red running and brake, and amber turn signals, so the colors communicate different actions from the rear of the vehicle. The clear polycarbonate lens is specified to isolate water, dust, and sand, while the iron frame adds a protective structure. The package includes two lights and a wiring manual, giving buyers both the matched lamps and a reference for installation; the listing identifies trucks as compatible vehicles.

Pros
  • Two-light trailer tail light kit
  • 40 LEDs per light
  • White reverse, red running/brake, and amber turn signals
  • Clear PC lens and sturdy iron outer frame
Cons
  • The listed vehicle compatibility specifies trucks, not a broader range of vehicle types.

Skip it if you are fitting a boat or a wide range of vehicle types; Partsam's 75-LED bars list boats, trailers, RVs, and more.

This Nilight kit fits truck owners wanting a paired set with separate white reverse, red brake/running, and amber turn signals. The stated truck compatibility and 30-volt specification warrant attention when planning the electrical installation.

Full product details
BrandNilight
ColorRed/Amber/White
Compatible with Vehicle TypeTruck
Included Components2PCS Trailer Tail Light Kit and one wiring manual
Lens ColorClear
Lens MaterialPolycarbonate
ManufacturerNilight
Part NumberTL-44
Manufacturer Warranty Description2 Years Warranty
Model NumberTL-44
Model Year2010
Special FeatureWaterproof
Voltage30 volts
Wattage19.2 watts

Listed on Amazon as: Nilight Trailer Tail Light Kit Running Brake Turn Signals Reverse lights

View on Amazon
MAXXHAUL Square Lights

#4 · License Plate Light

4. MAXXHAUL Square Lights

  • Lens Material: Acrylic
  • Voltage: 12 V
  • Compatible with Vehicle Type: RV, Trailer, Truck, Vans, SUV Boat, Flatbed

Best for: Square combination signal lamps.

Why it ranks #4: Each combination light includes red stop, turn, and tail LEDs, white reverse LEDs, and separate white license-plate illumination for 12V vehicles.

A combination of red stop, turn, and tail LEDs with white reverse and license-plate illumination gives the MAXXHAUL square lamps several distinct rear-light roles. The two-pack uses a 12V supply and lists trucks, trailers, RVs, vans, SUVs, boats, and flatbeds among compatible vehicle types.

Each square lamp combines red LEDs for stop, turn, and tail functions with white LEDs for reverse and license-plate illumination, reducing the need to assign those functions to separate lamps. The PMMA lens is sonic-welded to an ABS housing, and stainless-steel front screws add corrosion resistance. Those construction details support use in exposed vehicle settings; the 12V specification and two-pack format help buyers plan a paired installation across listed vehicles.

Pros
  • Two-pack of square combination tail lights
  • Red stop, turn, and tail functions
  • White reverse and license-plate illumination
  • Sonic-welded PMMA lens, ABS housing, and stainless-steel screws
Cons
  • The listing does not provide a stated mounting dimension for checking available space.

Skip it if you must verify a precise lamp size before selecting a replacement; the supplied listing does not state dimensions.

These MAXXHAUL lamps suit owners of trucks, trailers, boats, and RVs who want red signaling plus white reverse and plate illumination. Check available mounting space before purchase because the listing provides no lamp dimensions.

Full product details
BrandMAXXHAUL
ColorRed Lens
Compatible with Vehicle TypeRV, Trailer, Truck, Vans, SUV Boat, Flatbed
Included ComponentsOne 2-pack Universal Square 12V Combination 38 LED Signal Tail Light
Item Weight2 pounds
Lens ColorRed
Lens MaterialAcrylic
ManufacturerMaxxhaul Towing Products
Part Number80685
Manufacturer Warranty DescriptionPlease contact seller for manufacturer's warranty
Model Number80685
Model Year80685
Special FeatureDustproof
Voltage12 volts
Wattage3 watts
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including acrylonitrile which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Listed on Amazon as: MAXXHAUL 80685 Universal Square 12V Combination 28 LED Signal Tail Light – For Truck Trailer Boat Jeep SUV RV Vans Flatbed 2 Pack

View on Amazon
Nilight Tailgate Bar

#5 · Tailgate Strip

5. Nilight Tailgate Bar

  • Voltage: 12 V
  • Compatible with Vehicle Type: Car, Golf Cart, Truck

Best for: Full-width tailgate light strip.

Why it ranks #5: The 60-inch, 108-LED strip is designed for a truck tailgate and lists 12V compatibility, IP67 sealing, adhesive mounting, and included hardware.

A 60-inch strip with 108 LEDs spans a tailgate-width area and adds rear lighting without drilling, using an adhesive enhancer to strengthen its hold. Nilight lists red, white, and amber lighting and a 12-volt supply, making this a strip-style option for trucks and other listed vehicles.

The 60-inch flexible bar uses 108 LEDs and is intended for tailgates, cargo carriers, trailers, or vehicle tops, extending signal lighting across a broad mounting area. Its no-drill adhesive installation avoids drilling holes, while an adhesive enhancer is specified to improve hold. An IP67 sealed housing protects against rain, snow, dirt, and sand. The included 43-inch wire, including fuse, is a practical reach consideration when routing power to the mounting location.

Pros
  • 60-inch strip with 108 LEDs
  • No-drill adhesive installation with enhancer
  • IP67 sealed against rain, snow, dirt, and sand
  • 43-inch wire length including fuse
Cons
  • The supplied wire is 43 inches long, which can constrain routing to a distant power connection.

Skip it if you need more than 43 inches of included wiring to reach your connection; this bar's listed wire length includes the fuse.

Pick this Nilight strip if you want broad tailgate, cargo-carrier, or trailer lighting with adhesive, no-drill mounting. Measure the mounting span and power-routing path first; the strip is 60 inches long and its wire is 43 inches.

Full product details
BrandNilight
Color60" Tailgate Light Strip Red/White/Amber Single Row
Compatible with Vehicle TypeCar, Golf Cart, Truck
Included ComponentsLED tailgate Lights Bar
Item Dimensions8 x 0.3 x 7 inches
Item Weight3.2 ounces
Dimensions8 x 0.3 x 7 inches
ManufacturerNilight
Part NumberTR-101-A
Manufacturer Warranty Description2 Years Warranty
MaterialPlastic
Model NumberTR-101-A
Recommended UsesVehicle Exterior, Household Decoration
Voltage12 volts

Listed on Amazon as: Nilight 60 Inch Truck Tailgate Light Bar 108 LED Single Row

View on Amazon
Partsam 17-Inch Bar

#6

6. Partsam 17-Inch Bar

  • Lens Material: Plastic
  • Voltage: 12 V
  • Compatible with Vehicle Type: Trailer, RV, Truck, Tractor, etc

Best for: Low-profile wide-trailer bar.

Why it ranks #6: This 17-inch bar provides stop, tail, and turn functions, with 40 LEDs, a slim mounting profile, and a stated waterproof sealed housing.

A slim 17-inch profile lets this Partsam bar fit installations where space is limited, with horizontal, vertical, or angled mounting options. Its 40 LEDs provide stop, tail, and turn functions for trailers over 80 inches wide, and the clear lens, red light, and 12-volt specification make its role straightforward.

The low-profile 17-inch bar can be mounted horizontally, vertically, or at an angle, giving buyers flexibility when working around limited space. Its 40 Nichia Super FLUX LEDs produce a stated 460 lumens and serve as stop, tail, and turn lighting on trailers over 80 inches wide. A sonically sealed housing and lens are described as waterproof and submersible, which supports use in wet conditions; the 12V supply defines the electrical requirement.

Pros
  • 17-inch low-profile bar for space-constrained installations
  • Horizontal, vertical, or angled mounting
  • 40 Nichia LEDs with stated 460-lumen output
  • Stop, tail, and turn functions; sealed waterproof housing
Cons
  • The listed three functions do not include a reverse-light function.

Skip it if you need reverse lighting from the same bar; the Partsam unit lists stop, tail, and turn functions only.

This Partsam bar suits owners of trailers over 80 inches wide who need a slim, adjustable-position stop, tail, and turn lamp. Its 17-inch length and lack of reverse lighting define the main fit and function limits.

Full product details
BrandPartsam
ColorRed Led
Compatible with Vehicle TypeTrailer, RV, Truck, Tractor, etc
Item Dimensions17 x 4 x 2 inches
Item Weight16 ounces
Lens ColorClear
Lens MaterialPlastic
ManufacturerPARTSam
Part Number‎GTCV-0744590477
Manufacturer Warranty Description1 year for quality issue
Model Year1997
Special FeatureLow-profile trailer tail light serves 3 functions: Stop light, Tail light, Turn signal light, Sonically sealed, waterproof housing and lens unit is submersible, Thin-design Series has a low profile so that light can fit in tight spaces See more
Voltage12 volts
Wattage40 watts

Listed on Amazon as: Partsam 2Pcs 17" Clear Lens Red LED Tail Light Bar – 40 LED 3rd Brake/Stop/Turn & Tail Light; DOT Approved, Sealed Waterproof Clearance Marker Identification Tail Light Bar for Trucks Trailers

View on Amazon
WahMOTOTin Oval Lights

#7

7. WahMOTOTin Oval Lights

  • Lens Material: Polycarbonate
  • Voltage: 12 V DC
  • Compatible with Vehicle Type: Trucks, trailers, tractors…

Best for: Smoked oval halo lighting.

Why it ranks #7: The two 6-inch, 52-red-LED oval lights are specified for 12V vehicles and include rubber grommets; the listing claims IP67 submersible sealing.

A smoked lens and halo-style running light give WahMOTOTin’s 6-inch oval lamp a distinctive appearance, while 52 red LEDs handle brake, stop, and turn signaling. The two-light set includes rubber grommets and targets 12V vehicles, with compatibility listings that extend from trucks and trailers to boats and UTVs.

Each oval unit uses 52 red LEDs for brake, stop, and turn functions, with the halo style serving as the running light. That all-red configuration suits buyers who want matching rear lamps, but it does not provide a white reverse light. The package includes two lamps and two rubber grommets, supporting a paired installation; its 6-inch size and 12V DC specification give buyers concrete dimensions and electrical requirements to check against their setup.

Pros
  • Pair of 6-inch oval lights
  • 52 red LEDs per lamp
  • Halo-style running light plus brake, stop, and turn functions
  • Includes two rubber grommets; sealed submersible IP67 construction
Cons
  • Red-only lighting does not provide a white reverse-light function.

Skip it if you need a white reverse lamp in the same unit; Partswcgg's 4-inch round dual-color lights provide red and white illumination.

Choose this WahMOTOTin pair for a 12V truck, trailer, or boat installation calling for smoked oval lenses and red halo running lights. The 6-inch size and lack of white reverse lighting are important fit and function boundaries.

Full product details
BrandWahMOTOTin
ColorSmoked Lens Red Light
Compatible with Vehicle TypeTrucks, trailers, tractors, semi-trailers,utility trailers, dump trucks, buses, boats, UTVs, vans, lorries, caravans, snowmobiles, golf carts, and UTEs. Especially compatible with heavy-duty trucks like Kenworth, Peterbilt, Freightliner, utility trucks, parade floats, off-road vehicles, etc.
Included Components2x 6 inch Smoked Lens Oval Red led Trailer Tail Brake Stop Turn Running Halo lights,2x Rubber grommet ; 2x 3-Wires plug connect origin the trailer harness.
Lens ColorSmoked Lens
Lens MaterialPolycarbonate
ManufacturerWahMOTOTin
Part NumberWTLU0023
Manufacturer Warranty Description1 Year
Model NumberWTLU0023
Model Year2023
Special Feature‎Waterproof,Dustproof,High Beam,Shockproof,Submersible, Halo Light Design
Voltage12 volts_of_direct_current

Listed on Amazon as: 2Pcs 6" inch Smoked Lens Oval Red 52 LEDs Trailer Boat Halo Brake Stop Running Turn Signal Tail Lights【Patented】 w/Rubber Grommet, Sealed Submersible IP67 for Truck/RV/Van, DC 12V

View on Amazon
RUNHWEE Oval Lights

#8

8. RUNHWEE Oval Lights

  • Lens Material: Polycarbonate
  • Voltage: 12 V DC
  • Compatible with Vehicle Type: Boat, Car, Trailer, Truck

Best for: Compact red oval trailer lamps.

Why it ranks #8: The two red 6-inch lights combine parking, turn, tail, and brake functions, with IP67 protection and a stated two-year warranty.

Two compact 6-inch oval lights combine parking, turn, tail, and brake functions in red, giving RUNHWEE’s kit a multi-signal role in a small format. The pair is specified for 12V DC and includes surface-mount grommets, with compatibility spanning trucks, trailers, boats, and cars.

Each lamp uses 10 high-brightness red LEDs for parking, turn, tail, and brake functions, combining common rear signals in one unit. The 6-inch circular form and included black rubber grommets support surface mounting, while the standard 3-prong plug gives buyers a defined connection style to plan around. IP67 sealing protects against dust, sand, rain, and snow. The 12V DC specification and listed vehicle types provide further installation checks.

Pros
  • Pair of 6-inch circular red lights
  • Parking, turn, tail, and brake functions
  • Includes black rubber surface-mount grommets
  • IP67 weather sealing and standard 3-prong plug
Cons
  • Red lighting does not provide a white reverse-light function.

Skip it if you need white backup lighting in the same lamp; Partswcgg's 4-inch round dual-color lights emit red and white.

RUNHWEE’s pair suits a 12V truck, trailer, boat, or car needing compact red rear signals and surface-mount grommets. Its red-only output and 6-inch circular format are the main function and fit considerations.

Full product details
BrandRUNHWEE
ColorRED
Compatible with Vehicle TypeBoat, Car, Trailer, Truck
Included ComponentsTail Lights
Lens ColorRed
Lens MaterialPolycarbonate
ManufacturerRUNHWEE
Part NumberWD010
Manufacturer Warranty Description2 Years Warranty
Model NumberWD010
Model Year1990
Special FeatureWaterproof
Voltage12 volts_of_direct_current

Listed on Amazon as: 6" Oval LED Trailer Lights Kit, 2PCS Waterproof Stop/Turn/Brake Tail Lights with 10 LED Markers for Truck, RV, Boat, Trailer (Red) DOT Compliant

View on Amazon
Partswcgg Round Lights

#9

9. Partswcgg Round Lights

  • Lens Material: Polycarbonate
  • Voltage: 12 V
  • Compatible with Vehicle Type: Universal Fits

Best for: Dual-color round trailer lights.

Why it ranks #9: Four 4-inch lights provide red stop, turn, and tail plus white backup lighting; the package includes rubber grommets and three-prong pigtails.

Red stop, turn, and tail lighting can switch to white backup illumination in Partswcgg’s 4-inch round lamps, giving the four-piece set two light colors in one unit. Rubber grommets and three-prong wire pigtails are included for a flush-mount installation on listed 12V vehicle setups.

The same LEDs produce red for stop, turn, and tail functions and white for backup lighting, letting each 4-inch round lamp cover both signaling and reversing roles. Four lights, rubber grommets, three-prong pigtails, and an auxiliary blue wire are included, so the package supplies several installation components together. The 12V specification and IP67 waterproof rating establish electrical and environmental requirements to consider when planning a flush-mounted setup.

Pros
  • Four 4-inch round lights
  • Red stop, turn, and tail plus white backup lighting
  • Rubber grommets and three-prong wire pigtails included
  • IP67 waterproof rating; 12V specification
Cons
  • The 4-inch round format requires an appropriately sized flush-mount opening.

Skip it if you cannot accommodate a 4-inch round flush-mount opening; the included grommets support that mounting format.

Choose this Partswcgg set when a truck or trailer needs several 4-inch lamps with red signaling and white backup lighting. Its flush-mount grommets and supplied pigtails suit planned installations, not a different lamp format.

Full product details
BrandPartswcgg
ColorBlack
Compatible with Vehicle TypeUniversal Fits
Included Components4 inch round led lights, round rubber grommets, 3 prong trailer wire pigtails, auxliary blue wire
Lens ColorClear
Lens MaterialPolycarbonate
Manufacturer‎‎WCXT-US
Part NumberWCXT-042
Model Number4" round stop/turn/tail and backup light
Model Year2023
Special FeatureSubmersible, Waterproof
Voltage12 volts

Listed on Amazon as: Partswcgg 4Pcs 4" Round Red Stop Turn Tail Lights to White Back-up Lights 19 LED, 4 Inch Round Red/White Dual Trailer Truck Tail Lights with Rubber Grommet and 3 Prong Wire Pigtails IP67 Waterproof

View on Amazon
PerfecTech Smoke Bars

#10

10. PerfecTech Smoke Bars

  • Lens Material: Polycarbonate
  • Voltage: 12 V
  • Compatible with Vehicle Type: ATV

Best for: Slim smoke-lens light bars.

Why it ranks #10: The pair of 16-inch smoke-lens bars offers marker, parking, stop, turn, tail, and brake functions, but the listing’s vehicle fit is less truck-specific.

A slim 16-inch format pairs a smoke lens with 11 red LEDs per light, giving PerfecTech’s two-pack a narrow profile for trailer, boat, or off-road rear lighting. Each bar handles marker, parking, stop, turn, tail, and brake functions, with 12V power and IP67 waterproofing specified.

Each bar has 11 LEDs and covers marker, side-marker, parking, stop, turn, tail, and brake functions, giving buyers several red-light roles in one narrow unit. The 16-inch light uses a polycarbonate lens sonically welded to the housing, while glue seals the wire lead; IP67 waterproofing is specified for wet settings. Its 12V rating and slim dimensions help buyers assess electrical and space requirements before choosing a mounting location.

Pros
  • Two-pack of 16-inch light bars
  • 11 LEDs per light
  • Marker, parking, stop, turn, tail, and brake functions
  • IP67 waterproofing with sonically welded lens and sealed wire lead
Cons
  • The listed functions do not include a reverse-light function.

Skip it if you need a white reverse light integrated into the bar; Partswcgg's 4-inch round lights include white backup illumination.

These PerfecTech bars suit buyers seeking narrow smoke-lens lighting for a 12V trailer, boat, truck, or off-road vehicle. Their red functions cover several signaling roles, but reverse illumination requires a separate solution.

Full product details
BrandPerfecTech
ColorSmoke Lens
Compatible with Vehicle TypeATV
Included ComponentsTrailer Brake Tail Light
Item Dimensions15.5 x 1.3 x 0.5 inches
Lens ColorSmoke
Lens MaterialPolycarbonate
ManufacturerPerfecTech
Part Number11LED-smoke lens
Manufacturer Warranty Description1 year
Model Number11LED-Smkoe Lens
Model Year1997
Special FeatureWaterproof
Voltage12 volts

Listed on Amazon as: Smoke Lens Red 11 LED Trailer Brake Tail Light, 2 Pack 16” LED Stop Turn Signal Tail Lights Waterproof Brake Strip Red Light for Marine Boats Golf Cart Offroad Truck RV UTV ATV

View on Amazon

Avoiding wiring and signal-function mismatches

A tail light can physically fit and still fail to provide the signal functions your truck needs. The listed products vary: the Partsam 75 LED Bar combines running, brake, turn, and reverse lighting, while the Partsam 17-Inch Bar is described for stop, tail, and turn functions. The Partswcgg Round Lights explicitly add white backup lighting to red stop, turn, and tail functions.

Before ordering, compare the functions at your truck’s existing connector with the product’s wiring diagram and included leads; the product data here does not establish connector pinouts or vehicle-specific wiring compatibility. Take particular care with voltage: most listings specify 12 volts, but the Nilight TL-44 Kit’s specification lists 30 volts.

Do not assume that kit matches a 12V system solely because it is sold as a truck tail-light kit. Confirm the electrical requirements and wiring arrangement before installation.

Mounting style can determine whether a light fits

Check the opening and mounting surface before choosing a replacement, because these products use different installation styles. The Partsam 75 LED Bar and WUSHIXAN 75 LED Bar are surface-mounted bars, while the Nilight Tailgate Bar is a flexible 60-inch strip intended for tailgate or other listed applications. The WahMOTOTin Oval Lights include rubber grommets, and the Partswcgg Round Lights also include grommets and pigtails for a flush-style installation.

A product’s stated diameter or length is not enough to confirm fit: verify the actual cutout, available depth, mounting orientation, wire exit, and connector clearance against your vehicle. The supplied data does not give complete cutout dimensions for every light.

For trucks with an existing dedicated opening, a grommet-mounted shape may be a closer match; for a clear flat mounting area, a bar may be more suitable, subject to wiring and space checks.

How to Choose LED Truck Tail Lights

Signal functions

Choose a light that provides every signal your truck’s current setup requires. The Partsam 75 LED Bar lists running, brake, turn, and reverse functions, while the Partsam 17-Inch Bar covers stop, tail, and turn. The Partswcgg Round Lights specify red stop/turn/tail and white backup lighting, and the Nilight TL-44 Kit also lists reverse lighting.

Listings that combine more functions may simplify a replacement, but verify the wiring and connector before assuming each function will work with your vehicle. Buyers replacing a complete towing-light assembly may favour a multi-function unit; someone replacing only a tailgate strip or a three-function bar should match the existing circuit requirements instead.

Form factor and mounting

Match the light’s shape and mounting method to the space already available on your truck. The options range from the Nilight Tailgate Bar at 60 inches to the Partsam 17-Inch Bar and 6-inch oval lights from WahMOTOTin and RUNHWEE. The Partswcgg lights are 4-inch round units supplied with rubber grommets, while several bars are surface-mounted.

A strip suits buyers seeking a long tailgate installation; a compact oval or round unit may suit an existing lamp opening, if its cutout dimensions match. Measure the opening, depth, mounting surface, and wire route before ordering.

The product data does not supply every cutout measurement, so confirm fit against the manufacturer’s installation details.

Voltage and weather protection

Check the listed voltage and protection details against your vehicle and expected conditions. Several products specify 12 volts, including the Partsam 75 LED Bar, WUSHIXAN 75 LED Bar, and Nilight Tailgate Bar. The Nilight TL-44 Kit lists 30 volts, so verify its electrical suitability rather than treating it as interchangeable with a 12V option.

Waterproof descriptions also vary: the Partsam 75 LED Bar lists IP68, while the Nilight Tailgate Bar and several oval or round lights list IP67. Those labels are product claims, not a guarantee of compatibility or installation quality.

Buyers whose lights face frequent spray may prioritize a stated sealed or waterproof design; anyone wiring a replacement should still seal connections appropriately and follow the installation instructions.

Which LED Truck Tail Lights Should I Choose?

For a general truck, pickup, trailer, or RV replacement, choose the Partsam 75 LED Bar: its 12V specification, four listed functions, broad vehicle compatibility, and IP68 rating make it the strongest all-round fit in this set. Choose the WUSHIXAN 75 LED Bar if you want the same broad three-color, multi-function bar format with 75 LEDs. For a truck needing a long tailgate strip, the Nilight Tailgate Bar is the purpose-shaped 60-inch option.

If you need white reverse and license-plate illumination in a square assembly, consider the MAXXHAUL Square Lights. For existing round or oval openings, compare the WahMOTOTin Oval Lights, RUNHWEE Oval Lights, and Partswcgg Round Lights against the measured cutout.

Confirm voltage, wiring, and mounting before buying.

Frequently Asked Questions

How do I match a replacement LED tail light to my truck’s existing wiring?

Match the light’s listed functions and voltage to your vehicle, then compare its wires or connector with the existing wiring before purchase. Confirm which connections operate running, brake, turn, and reverse functions where applicable. If the product listing does not clarify the wiring, consult its instructions or a qualified installer rather than guessing.

Should I choose a surface-mount bar or a grommet-mounted oval light?

Choose a surface-mount bar when its location and mounting method suit the vehicle, or when you want a bar-shaped light. Choose a grommet-mounted oval light if your truck already has a compatible round or oval opening. Measure the cutout and check available mounting space before selecting either style.

What should I check before relying on a tail light’s waterproof rating?

Check the exact rating stated for the specific light, along with how it is sealed and mounted. A rating alone does not confirm that the wiring connections or installation are protected in your setup. Follow the product instructions, seal connections as directed, and make sure the light is installed securely.

How can I tell whether an oval or round light will fit an existing opening?

Measure the opening’s shape and dimensions, then compare them with the light and its grommet requirements. Check that there is enough room behind the panel for the assembly and wiring. Product titles may identify a light as oval or round, but those descriptions alone do not establish that it fits your cutout.

Which light functions should I confirm before replacing a tail light?

List the functions your vehicle needs, such as running, brake, turn, or reverse lighting, and verify that the chosen product supports them. Product titles vary in the functions they name, so do not assume that every light covers every role. Also confirm voltage and wiring compatibility before installation.

Final Words

For a broad truck, pickup, trailer, or RV replacement, start with the Partsam 75 LED Bar if its surface-mount design and wiring fit your vehicle. Choose the WUSHIXAN bar for a similar three-color format, or the Nilight 60-inch bar for a tailgate-length option. For existing openings, compare oval or round lights with measured cutouts; check voltage, wiring, functions, and mounting before deciding.

Leave a Reply

Your email address will not be published. Required fields are marked *