Best Electric Fuel Pump Low Pressure for Carbureted Engines

#1 · Best Overall

1. ENGINEMAN 28 GPH Pump

• Material: Copper
• Compatible with Vehicle Type: ATV, Car, Motorcycle, RV, Truck
• Operation Mode: Electric

Best for: Hose-included carburetor fuel kit.

Why it ranks #1: Its 2–3.5 PSI and 28 GPH suit low-pressure carbureted delivery, and the listing includes 6.56 feet of 5/16-inch-ID fuel hose.

A 6.56-foot fuel-line hose is included with the ENGINEMAN pump, giving buyers a supplied line for installation planning. The pump’s 2–3.5 PSI output and 28 GPH flow target carbureted engines, with listed vehicle compatibility including cars, trucks, ATVs, motorcycles, and RVs.

The included 6.56-foot hose can reduce the need to source a separate fuel line for a compatible installation, while the listed 5/16-inch line size helps check connection requirements. Its 2–3.5 PSI output and 28 GPH flow are specified for gentle carbureted fuel delivery. The directional inline design is intended to support smooth operation without vapor lock during extended use. Listed applications include cars, trucks, generators, and other vehicle types.

Skip it if you need a 3–6 PSI pump for gasoline or diesel; ENGINEMAN HEP-02A lists that output range.

This ENGINEMAN kit suits carbureted setups needing a 2–3.5 PSI pump and an included fuel line, particularly in listed cars, trucks, or generators. Check hose length and line size against your routing.

Listed on Amazon as: Gasoline Electric Fuel Pump Universal 12V 1-2A 28GPH 2-3.5 PSI Operating Fuel Pressure with 5/16 Inch (8mm) ID Fuel Line Hose 6.56FT

#2 · Lowest Pressure

2. CarBole 28 GPH Pump

• Material: Cast Iron, Rubber
• Compatible with Vehicle Type: Car
• Operation Mode: Electric

Best for: Low-pressure pump with two-bolt mount.

Why it ranks #2: The listed 2–3.5 PSI output and 28 GPH flow fit gentle carburetor delivery, with 5/16-inch inlet and outlet connections.

A two-bolt fitting gives the CarBole pump a specific mounting arrangement for buyers planning an inline replacement. Its 2–3.5 PSI output and 28 GPH flow suit listed low-pressure applications, while the 5/16-inch ports and two-wire design define key connection details.

The 2–3.5 PSI operating range and 28 GPH flow provide a defined match for carbureted fuel delivery, while the stated stronger suction is intended to support stable feeding. The 5/16-inch inlet and outlet make hose planning straightforward, and the two-wire electrical design establishes the connection approach. Its two-bolt fitting informs mounting preparation. The listing identifies gasoline use and does not recommend E85, ethanol, or methanol, an important fuel boundary.

Skip it if you use E85; ENGINEMAN FP106132 is listed for gasoline and diesel rather than alcohol-based fuel.

CarBole suits a buyer fitting a 12-volt, gasoline-only low-pressure pump where 5/16-inch lines and a two-bolt mount match the installation. Its fuel restriction is decisive: the listing does not recommend E85, ethanol, or methanol.

Listed on Amazon as: CarBole Gasoline Electric Fuel Pump Universal 5/16 Inch Inlet and Outlet Inline 12V 1-2A 28GPH 2-3.5P.S.I. Operating Fuel Pressure

#3 · Precise PSI Range

3. DTMAP 28 GPH Pump

• Material: Brass, Iron, Plastic
• Compatible with Vehicle Type: Car
• Operation Mode: Automatic

Best for: Precisely specified low-pressure transfer.

Why it ranks #3: It specifies 2–3.5 PSI, 28 GPH, and 1–2A for 12V carbureted engines, though its listed connection sizes merit careful checking.

A defined 2–3.5 PSI output paired with 28 GPH (106 LPH) flow gives the DTMAP pump clear figures for matching a low-pressure system. Its listing limits use to 12-volt carbureted engines and diesel lift or transfer, making the intended boundary explicit.

The 2–3.5 PSI output is specified to deliver gentle pressure without overwhelming carburetor float needle valves, while the 28 GPH (106 LPH) rating clarifies the stated flow capacity. Its 1–2A current draw gives an electrical planning figure for a 12-volt installation. The listing explicitly limits use to carbureted engines and diesel lift or transfer, and warns it will not fit high-pressure electric fuel systems. Those limits help avoid a mismatched application.

Skip it if you need a high-pressure injection pump; DTMAP explicitly excludes high-pressure electric fuel systems.

DTMAP is for buyers matching a 12-volt carbureted engine or diesel lift-and-transfer setup to a specifically stated 2–3.5 PSI pump. Do not use it for high-pressure electric fuel systems; confirm the ports and pressure suit the installation.

Listed on Amazon as: 12V Universal Electric Fuel Pump 2-3.5 PSI, 28 GPH 106 LPH 1-2A

#4 · Broad Equipment Fit

4. LOCOPOW HEP-02A Pump

• Material: Aluminum, Brass
• Compatible with Vehicle Type: Cars,Lawn Mower,Trucks
• Operation Mode: 12v

Best for: Low-pressure rotary-vane replacement.

Why it ranks #4: Its 2.5–4 PSI range targets low-pressure use, and the listing names cars, trucks, boats, generators, and lawn mowers.

A stated 1.2-amp current draw gives the LOCOPOW pump a clear electrical figure for planning a 12-volt replacement. Its 2.5–4 PSI range is aimed at low-pressure transfer, and listed compatibility covers cars, trucks, boats, generators, and lawn mowers.

The 2.5–4 PSI output places this pump in a low-pressure range suited to compatible carburetor fuel systems, while its 8-millimeter inlet and outlet connections help buyers plan hose routing. The listing identifies a rotary-vane style and describes an upgraded check valve intended to provide suitable flow and reduce pump noise. Brass body material and specified 1.2-amp current add useful installation and electrical details for a replacement across the listed vehicle and equipment types.

Skip it if you need a 5–9 PSI pump; STEINBRÜCKE HEP-02A lists a 4–7 PSI output range.

Consider LOCOPOW for a 12-volt low-pressure replacement in a listed car, truck, boat, generator, or mower. Its 2.5–4 PSI output and 8-millimeter ports are the main fit checks for the intended fuel system.

Listed on Amazon as: 12V General Purpose Electric Fuel Pump, Low Pressure 2.5-4 PSI Inline, Gasoline Diesel Engine Gasoline Transfer Fuel Pump for Carburetor Lawn Mower Boat Carter HEP-02A

#5 · Listed 30 GPH

5. SOLLON HEP-02A Pump

• Material: Brass
• Compatible with Vehicle Type: Lawn Mower
• Operation Mode: Electric

Best for: Check-valve small-engine transfer.

Why it ranks #5: This 12V pump lists 2.5–4 PSI, 30 GPH, and 8 mm hose sizing, serving carburetors, lawn mowers, ATVs, and boats.

A built-in check valve intended to prevent backflow is the key practical feature of SOLLON’s 12-volt inline pump. Its 2.5–4 PSI output and 30 GPH flow target low-pressure transfer, with listed applications spanning lawn mowers, carburetors, ATVs, boats, and other 12-volt vehicles.

The check valve is intended to prevent fuel from flowing backward, a useful feature for maintaining the fuel line’s direction of flow after shutdown. A 30 GPH rating and 2.5–4 PSI output give buyers concrete capacity and pressure figures for matching a carbureted setup. The 8 mm (5/16-inch) hose size helps plan the plumbing, while the compact, lightweight construction can ease placement where installation space is limited.

Skip it if you need 5–9 PSI output; Megaflint E8012S lists that higher pressure range.

SOLLON suits buyers fitting a 12-volt low-pressure pump to a carbureted mower, ATV, boat, or other listed application where backflow prevention matters. Check that 2.5–4 PSI and 8 mm hose connections match your setup.

Listed on Amazon as: Electric Fuel Pump 12V Universal Low Pressure 12 Volt Transfer Inline Fuel Pump for Lawn Mower Carburetor Gas Diesel Engine 2.5-4psi HEP-02A

#6

6. JDMSPEED JDM-E012 Pump

• Material: Metal
• Compatible with Vehicle Type: ['ATV', 'Motorcycle']
• Operation Mode: Electric

Best for: Mixed-fuel small-engine transfer.

Why it ranks #6: Its 3–6 PSI output and flow above 70 L/H suit transfer and carburetor applications; the package includes a socket wire.

A 3–6 PSI output paired with flow above 70 L/H gives this JDMSPEED pump a broad low-pressure range for carbureted fuel transfer. Its stated gasoline-and-diesel compatibility extends its use across listed 12-volt applications, from lawn mowers and generators to boats and other vehicles.

The included socket wire gives the installation a supplied electrical connection, while the 2.638-inch mounting-hole spacing helps plan where the pump can be secured. Its 0.315-inch tubing interface and stated flow above 70 L/H make hose sizing and transfer capacity clear before installation. The metal body and corrosion-focused finish support use where the pump and fuel lines face routine handling. Its 3–6 PSI range suits low-pressure carbureted setups, not high-pressure injection systems.

Skip it if you need a 5–9 PSI range; Megaflint E8012S lists that higher output band.

Choose this JDMSPEED pump for a 12-volt carbureted mower, generator, boat, or other listed gasoline or diesel application needing low-pressure transfer. Check the 0.315-inch tubing interface and 2.638-inch mounting spacing against your installation.

Listed on Amazon as: Universal Electric Fuel Pump Kit 12v 3-6 PSI Low Pressure Replacement For Carburetor Lawn Mower Gas Diesel Fuel Transfer Pump

#7

7. ENGINEMAN HEP-02A Pump

• Material: Cast Iron, Copper
• Compatible with Vehicle Type: ATV, Car, Motorcycle, Truck
• Operation Mode: Electric

Best for: Gasoline-and-diesel transfer applications.

Why it ranks #7: The listed 3–6 PSI output and 12V compatibility cover carbureted vehicles and small equipment, with a one-year manufacturer warranty.

Compatibility with both gasoline and diesel, alongside a stated 3–6 PSI output, makes the ENGINEMAN HEP-02A a flexible low-pressure transfer option. Its listed 12-volt applications include cars, trucks, boats, lawn mowers, small engines, ATVs, UTVs, and generators, but exclude alcohol-based fuels such as E85.

The 3–6 PSI output identifies the pump’s low-pressure range, and the listing describes high-flow performance for fuel-transfer use. Its broad 12-volt application list covers vehicles and small equipment, so buyers can consider it across more than one listed category. The stated gasoline and diesel compatibility is bounded by the explicit exclusion of alcohol-based fuels such as E85. The HEP-02A cross-reference and included housing provide useful identification and installation-planning details.

Skip it if you need a stated 2–3.5 PSI output; DTMAP 2-3.5 PSI 28GPH lists that narrower range.

Choose this ENGINEMAN for listed 12-volt gasoline or diesel transfer in a car, truck, boat, mower, or small engine. Keep its 3–6 PSI range and exclusion of alcohol-based fuels in view when matching the system.

Listed on Amazon as: Electric Fuel Pump 12V Electric Transfer for Universal Low Pressure Gas Diesel Fuel Pump 3-6psi HEP-02A For Lawn Mower Carburetor Cars Trucks Boats

#8

8. STEINBRÜCKE HEP-02A Pump

• Material: Metal
• Compatible with Vehicle Type: Car, Truck
• Operation Mode: Electric

Best for: 12-inch-suction carburetor pump.

Why it ranks #8: Its 4–7 PSI output and 12-inch suction listing suit some transfer needs, but its higher pressure is less targeted to low-PSI carburetors.

A listed suction lift of up to 12 inches gives the STEINBRÜCKE HEP-02A a useful specification for installations drawing fuel from below the pump. Its 4–7 PSI output targets low-pressure transfer, with 12-volt compatibility stated for cars, trucks, boats, and generators.

The 4–7 PSI output defines the pump’s low-pressure operating range, while the 12-inch maximum suction figure helps assess placement relative to the fuel source. Its 8-millimeter inlet and outlet connections provide a concrete hose-sizing reference for installation. The metal body and 12-amp fuse specification are also useful planning details when routing and protecting the electrical connection. Listed cross-references include E8012S, FD0002, P60430, EP12S, and 6414671.

Skip it if you need a 2–3.5 PSI output; CarBole 10103007 lists that lower pressure range.

This STEINBRÜCKE pump fits buyers seeking a 12-volt low-pressure transfer unit for a listed car, truck, boat, or generator. Account for its 4–7 PSI range, 8-millimeter connections, and specified fuse in the installation.

Listed on Amazon as: Electric Fuel Pump – Inline fuel pump Low Pressure HEP-02A (4-7 PSI), 12V Fuel pump Electric Fuel Pump 12v for Carburetor Lawn Mower Transfer Pump

#9

9. Megaflint E8012S Pump

• Material: Zinc
• Compatible with Vehicle Type: Car, Truck
• Operation Mode: Electric

Best for: Higher-pressure carburetor replacement.

Why it ranks #9: It offers 5–9 PSI, 30 GPH, and up to 12-inch suction lift, but that pressure range is higher than many carburetor setups need.

A stated 12-inch suction lift gives the Megaflint E8012S a practical advantage when the fuel source sits below the pump. Its 5–9 PSI output and 30 GPH flow suit listed cars, boats, trucks, and generators, while the inline format supports a range of replacement or supplemental-pump arrangements.

The 5–9 PSI output and 30 GPH flow provide a defined operating range for compatible low-pressure systems; the listed consistent output is intended to reduce carburetor flooding or fuel starvation. Up to 12 inches of suction capability can help draw fuel from a lower source and ease priming. Its 5/16-inch inlet and outlet sizes help determine hose fit before installation. The listing also identifies booster, standby, and independent-installation use cases.

Skip it if you need a 2.5–4 PSI pump; SOLLON 06SL01HEP lists that lower pressure range.

The Megaflint suits buyers replacing or adding an inline pump in a listed car, boat, truck, or generator, especially where suction lift matters. Its 5–9 PSI output and 5/16-inch ports are key compatibility boundaries.

Listed on Amazon as: Inline Fuel Pump 12V Universal Electric Fuel Pump Low Pressure 5-9 PSI For Gas Diesel E8012S 1-2A | 30GPH | 5/16Inch

#10

10. OXCANO E8090 Pump

• Material: Plastic
• Compatible with Vehicle Type: Car
• Operation Mode: Automatic

Best for: 12V carbureted inline replacement.

Why it ranks #10: It is listed for 12V carbureted engines and supplies 5–9 PSI, but that higher range is less suitable for many low-pressure applications.

A supplied installation kit and inline format make the OXCANO E8090 a replacement option for 12-volt carbureted vehicles. Its stated plunger fuel delivery and stronger suction are intended to stabilize feeding, while the E8090 and SP1141 references help buyers compare the pump with an existing part number.

This pump is explicitly limited to 12-volt carbureted engine vehicles, giving buyers a clear application boundary before they plan a replacement. The inline design and included installation kit support integrating it into a compatible fuel line, while plunger delivery and stronger suction are intended to keep fuel feeding more stable. Its plastic body is a relevant material consideration for installation planning. The listing advises checking the original equipment part number against E8090 or SP1141.

Skip it if you need a listed diesel-compatible pump; JDMSPEED JDM-E012 supports gasoline or diesel applications.

Choose the OXCANO when replacing an E8090 or SP1141-style pump in a 12-volt carbureted vehicle and an installation kit is useful. Its stated fit is narrow, so it is not the choice for other engine systems.

Listed on Amazon as: E8090 Electric Fuel Pump Universal 12 Volt Inline 5-9 PSI 3/8 Inlet & Outlet Low Pressure Fuel Pump Compatible with Carbureted Models E8090 SP1141