Best Battery Tray Group 24 for Boats, RVs, and Vehicles

#1 · Best Overall

1. NOCO BT24S

• Weight: 8.16 oz

Best for: Certified single-battery marine hold-down.

Why it ranks #1: Its 42-inch military-grade strap secures a single Group 24 battery, and the listing specifies USCG 183.420 and ABYC E-10.7 compliance.

A 42-inch military-grade hold-down strap rated above 120 kilograms force gives the NOCO BT24S a clearly specified retention system for one Group 24 battery. Its stated USCG and ABYC compliance also makes it relevant to marine buyers who prioritize those listed standards.

The water-resistant nylon strap measures 42 inches and uses a heavy-duty buckle, providing a substantial hold-down for the single Group 24 battery this tray is made to accommodate. NOCO states that the product meets U.S. Coast Guard Code of Federal Regulations 183.420 and ABYC E-10.7 specifications. It is also listed for marine, RV, camper, and trailer batteries, so buyers can match its single-battery capacity and stated standards to their installation needs.

Skip it if you need two trays for separate batteries; the GAQUECY Group 24 Marine Boat Battery Tray is listed as a two-pack.

The NOCO BT24S suits a buyer securing one Group 24 battery in a marine, RV, camper, or trailer installation who values its listed compliance. Its single-battery capacity is the important boundary for multi-battery setups.

Listed on Amazon as: NOCO BT24S Group 24 Heavy-Duty Battery Tray for Marine, RV, Camper and Trailer Batteries

#2 · Certified Crossbar

2. Attwood 9096-5

• Weight: 1.4 lb

Best for: Regulation-conscious boat installs.

Why it ranks #2: This 24-series marine tray includes an adjustable-height crossbar and stainless retaining fasteners, and its listing cites ABYC E-10 and USCG requirements.

USCG approval and stated compliance with ABYC Standard E-10 make this Attwood tray a marine-focused choice for Group 24 batteries. Its adjustable-height crossbar and stainless steel retaining fasteners provide a mechanical hold-down approach for boat owners who prefer a clamp over a strap.

The adjustable-height crossbar lets the hold-down accommodate the battery’s height, while stainless steel retaining fasteners secure the assembly. Attwood states that the tray meets ABYC Standard E-10 and U.S. Coast Guard requirements, making those specifications central to its appeal for boat installations. It fits Group 24 batteries and installs with #10 fasteners, which are not included, so buyers need to provide those fasteners as part of their mounting setup.

Skip it if you want an all-plastic hold-down without metal components; the Attwood 9097-5 uses an all-plastic crossbar system.

Choose this for a Group 24 boat battery when the stated marine compliance and adjustable crossbar suit your installation. Factor in the need to supply #10 fasteners, and consider whether the crossbar arrangement fits your mounting space.

Listed on Amazon as: Attwood 9096-5 USCG-Approved 24 Series Heavy Duty Adjustable Hold-Down Marine Boat Battery Tray, Black

#3 · Rust-Free Clamp

3. Attwood 9097-5

• Weight: 10.24 oz

Best for: Rust-free crossbar hold-down.

Why it ranks #3: Its all-plastic construction has no metal parts, while an adjustable-height crossbar and included retaining bolts secure Group 24 batteries.

An all-plastic construction gives the Attwood 9097-5 a specific marine advantage: its tray has no metal parts to rust and no webbing strap to degrade. The adjustable-height crossbar expands from 7 to 9.5 inches, offering a clamp-style hold-down for taller Group 24 batteries.

The non-corrosive plastic body avoids metal components, while the adjustable-height crossbar and two retaining bolts with ergonomic nuts secure the battery. Its 7-to-9.5-inch adjustment range is useful when a taller Group 24 battery needs more vertical clearance than a fixed hold-down allows. Attwood lists boat compatibility and includes the tray, nuts, and bolts, giving marine installers the specified hardware for assembly without relying on a strap-based retention system.

Skip it if you want an included poly strap and a narrow mounting footprint; the T-H Marine Narrow Battery Tray includes both.

This tray suits boat owners seeking an all-plastic Group 24 hold-down with adjustable crossbar height. Its 7-to-9.5-inch range and bolt-based mounting are the relevant fit considerations for a particular battery and compartment.

Listed on Amazon as: Attwood 9097-5 Heavy-Duty Adjustable Battery Tray, Black – All-Plastic, Rust-Proof, Fits Group 24 Batteries

#4 · Space-Saving Design

4. T-H Marine Narrow Tray

• Weight: 8 oz

Best for: Narrow-space marine mounting.

Why it ranks #4: The narrow footprint, recessed mounting wells, and included quick-release poly strap suit tight marine or RV installations; the title identifies it as NMMA certified.

A narrow footprint is the defining benefit of this T-H Marine tray, helping it fit tight boat bilges, transoms, and RV compartments where installation space is constrained. Recessed mounting wells keep fasteners below the surface, while the integrated poly strap and quick-release buckle hold the battery.

The tray’s narrow Group 24 format targets confined locations, and its recessed mounting wells hide fasteners and eliminate external tabs. That low-profile arrangement can help the tray sit flat and reduce snag points during installation. An integrated poly strap with a quick-release buckle secures the battery without a separate hold-down purchase. The product is listed for marine and RV use, with 10-5/8-by-7-inch dimensions; hand washing is the stated care method.

Skip it if you need an adjustable-height crossbar rather than a strap; the Attwood 9097-5 includes a crossbar and retaining bolts.

Select this tray for a Group 24 marine, RV, or trolling-motor installation where narrow dimensions and recessed mounting wells address space or snag concerns. Its listed 10-5/8-by-7-inch footprint is the key fit consideration.

Listed on Amazon as: T-H Marine Narrow Battery Tray Holder with Poly Strap – Space Saving NMMA Certified Battery Tray with Recessed Mounting Wells for Marine, RV, and Trolling Motor Installations – Group 24, 10-5/8" x 7"

#5 · Frame-Top Hold-Down

5. T-H Marine Frame Top

• Weight: 12 oz

Best for: Quick-adjust marine frame clamp.

Why it ranks #5: Its frame-top design uses stainless-steel rods and easy-adjust knobs to clamp a 24-series battery, with recessed fasteners for installation.

Easy-adjust knobs make the T-H Marine frame-top tray a useful choice when battery height needs quick adjustment during setup. Its clamp-style frame secures a Group 24 battery, while stainless steel rods and recessed fasteners address corrosion resistance and snag-conscious marine installation.

The frame-top design clamps the battery to help limit movement in rough water and during trailering, addressing two common marine handling conditions named in the product description. Easy-adjust knobs simplify setting the battery height, while stainless steel rods resist corrosion and recessed fasteners provide a cleaner, less snag-prone installation. It fits a 24 Series battery and measures 14.05 by 8.2 by 2.15 inches, so confirm the compartment can accommodate that footprint.

Skip it if you prefer an all-plastic crossbar with no metal parts; the Attwood 9097-5 uses an all-plastic construction.

This tray suits boat owners who want a quickly adjustable frame-top clamp for a 24 Series battery, especially for rough-water use or trailering. Its 14.05-by-8.2-inch footprint is an important compartment-fit consideration.

Listed on Amazon as: TH Marine BHF-24S-DP Frame Top Battery Tray fits 24 Series Battery

#6

6. A.A Group 24 Tray

• Weight: 10.2 oz

Best for: Strap-secured Group 24 installs.

Why it ranks #6: This heavy polypropylene tray fits 24-series batteries up to 7 by 11 inches and includes a safety strap, buckle, and eight mounting points.

Eight mounting points give this A.A. tray several places to secure its base, while the included strap and buckle restrain the battery. That combination suits automotive, marine, and RV installations where limiting battery movement matters and a Group 24 battery measures up to 7 by 11 inches.

The high-impact polypropylene construction provides a tough plastic base for automotive, marine, boat, or RV use. Four mounting points run along each long side, giving installers multiple positions for fastening the tray. Its included safety strap and buckle then hold the battery in place, helping limit movement after installation. The stated fit accommodates Group 24 batteries up to 7 by 11 inches, so buyers can compare those dimensions with their battery before setting up the tray.

Skip it if you need a crossbar hold-down; the Attwood 9096-5 uses an adjustable-height crossbar and stainless steel retaining fasteners.

Choose this tray for a Group 24 automotive, marine, boat, or RV battery when a strap-based hold-down and multiple mounting points suit the installation. Check the battery’s dimensions against the stated 7-by-11-inch limit.

Listed on Amazon as: Automotive, Marine, Boat, RV Battery Tray – Group 24 Series With Strap, Battery Holder (24 Series)

#7

7. LRWZOV Group 24 Tray

• Weight: 8.4 oz

Best for: Impact-resistant strap retention.

Why it ranks #7: Its 11-by-7-by-1-inch dimensions and integrated heavy-duty poly strap provide a clearly specified, compact base for Group 24 batteries.

High-impact polypropylene is the central feature of this LRWZOV tray, providing a tough plastic base for Group 24 battery installations in automotive, marine, and RV settings. Its integrated heavy-duty poly strap is intended to hold the battery against movement and accidental dislodgement during travel.

The polypropylene construction is specified to resist impacts and harsh conditions, supporting use across automotive, marine, and RV applications. An integrated heavy-duty poly strap locks the Group 24 battery in place, with the product description highlighting vibration, travel, and accidental dislodgement as concerns it addresses. The listed tray measures 11 by 7 by 1 inches and weighs 8.4 ounces, dimensions buyers can use when assessing an available mounting area.

Skip it if you need a stainless steel frame-top clamp; the T-H Marine BHF-24S-DP uses stainless steel rods and easy-adjust knobs.

Choose this for a Group 24 battery when a polypropylene base and integrated strap suit a vehicle, boat, or RV installation. Check the listed 11-by-7-by-1-inch tray dimensions against the available mounting area.

Listed on Amazon as: Group 24 Battery Tray for Boat, Marine, RV, Automotive

#8

8. GGTE Group 24 Tray

• Weight: 8.1 oz

Best for: Adjustable-buckle road and water use.

Why it ranks #8: The listing specifies fit for batteries up to 7 by 11 inches and a quick-release buckle, with high-strength plastic for marine, RV, and automotive use.

Adjustable buckles let this GGTE Group 24 tray secure a battery for bumpy roads or rough seas, the use case emphasized in its features. Its high-strength plastic construction supports automotive, marine, boat, and RV applications, with a stated battery fit up to 7 by 11 inches.

The adjustable buckle provides a way to position the hold-down around the battery, helping keep it secure during travel on roads or water. High-strength plastic is specified for durability, and the tray is listed for automotive, marine, boat, and RV use. Its fit covers Group 24 batteries up to 7 by 11 inches. Checking the battery dimensions against that limit helps establish compatibility before choosing a location for the tray.

Skip it if you want a two-tray purchase; the NSBGPSD Group 24 tray is listed as a two-pack.

This GGTE tray fits buyers securing one Group 24 battery in an automotive, marine, boat, or RV setting. Its adjustable buckle suits travel-related movement concerns, while the stated 7-by-11-inch battery limit remains the key fit boundary.

Listed on Amazon as: Group 24 Battery Tray for Automotive, Marine, Boat, Rv Battery Tray

#9

9. NSBGPSD Group 24 Tray

• Weight: 1.01 lb

Best for: Two-tray multi-install setup.

Why it ranks #9: This two-pack supplies two high-strength plastic trays with quick-release buckles for batteries up to 7 by 11 inches.

A two-pack gives this NSBGPSD Group 24 tray a practical advantage when an installation calls for two battery positions or a spare tray. Each plastic tray has a quick-release buckle to hold its battery, and the listed fit accommodates Group 24 batteries up to 7 by 11 inches.

The two-tray quantity can serve a pair of Group 24 installation points without buying trays individually. High-strength plastic is specified for impact resistance, while each tray’s adjustable buckle provides a way to secure the battery in automotive, marine, boat, or RV settings. The stated battery limit is 7 by 11 inches. Buyers should match their battery dimensions to that limit and plan mounting around the product’s listed 11.5-by-7.3-inch tray dimensions.

Skip it if you need a single tray with eight mounting points; the A.A. Group 24 tray includes four along each long side.

This two-pack suits boat, RV, marine, or automotive owners preparing two Group 24 battery positions. It is most relevant when both batteries fit the stated dimensions; check the 11.5-by-7.3-inch tray footprint against each mounting location.

Listed on Amazon as: Group 24 Battery Tray for Automotive, Marine, Rv, Boat Battery Tray, Series With Strap Battery Tray for Boat, (24 Series)(2 Pack)

#10

10. GAQUECY Group 24 Tray

• Weight: 15.5 oz

Best for: Two-tray marine battery setup.

Why it ranks #10: The two-pack includes safety straps, buckles, and screws, while its listing describes high-impact polypropylene resistant to gas, oil, acid, UV rays, and moisture.

This GAQUECY package supplies two Group 24 trays, making it a practical match for installations with two battery positions. Each tray includes a safety strap, buckle, and screws, while high-impact polypropylene is specified to resist gas, oil, acid, UV rays, and moisture.

The two-pack can equip a pair of Group 24 battery locations, with the included straps and buckles providing a hold-down for each tray. Screws are also listed as included, supporting the mounting workflow. The high-impact polypropylene is described as resistant to gas, oil, acid, UV rays, and moisture; the product also states that it helps contain leaks and promote airflow. Its listed package dimensions are 14.13 by 10.31 by 3.31 inches.

Skip it if you need a single tray with an adjustable-height crossbar; the Attwood 9096-5 provides that hold-down style.

Choose this two-pack for marine or boat installations with two Group 24 battery positions and a preference for included straps, buckles, and screws. Its stated group fit is the main compatibility boundary to check.

Listed on Amazon as: Group 24 Battery Tray for Marine Boat, 2 Pack