Best Snow Plow Hydraulic Pump for Plow-Specific and Universal Setups

#1 · Best Overall

1. Bailey Maxim Power Unit

• Weight: 40 lb

Best for: Remote-controlled winter plow unit.

Why it ranks #1: Built specifically for 12V snowplows, it lists 0.8 GPM, 2000 PSI, six SAE ports, a steel tank, and a 20-foot wired remote.

A 20-foot pre-wired remote gives the Bailey Maxim hydraulic unit control reach for winter plowing, with lowering-valve control and a float function. Its 12V motor, 1.6L steel tank, and 0.8 GPM flow make it a specified snowplow power unit for buyers comparing compact, single-acting lift systems.

The pre-wired 20-foot remote lets the operator control the unit without being tied directly to its mounting point, while the lowering valve supports the listed float function. Its 0.8 GPM flow and 2000 PSI maximum pressure offer concrete sizing references, and the 1.6L steel tank keeps the listed reservoir capacity modest. The unit powers lifting in the up direction; gravity returns the lift to ground, so it is not a powered-down lift arrangement.

Skip it if you need powered cylinder retraction; SHORELEV's 8L double-acting unit provides extension and retraction with dual solenoids.

This Bailey unit fits snowplow owners who want remote operation, float control, and stated pressure and flow figures. Its single-acting lift relies on gravity for return, a key boundary for the required plow movement.

Listed on Amazon as: Maxim Hydraulic Snow Plow 12VDC Single Acting Power Unit, .8 GPM

#2 · Best UTV System

2. MotoAlliance DENALI UTV System

• Weight: 20 lb

Best for: On-seat UTV blade angling.

Why it ranks #2: This snow-plow-specific UTV system adds hydraulic blade-angle adjustment, an OEM-style dash switch, and mounting brackets without converting the manual system.

An OEM-slot dash switch lets you change blade angle without leaving your UTV, making this MotoAlliance hydraulic system especially useful when repeated adjustments are part of a plowing run. It is intended as an addition to a MotoAlliance plow system, with brackets and a conversion approach that requires no alterations to the manual system.

The dash switch fits a machine's slot intended for OEM additions, keeping the angle control at the operator's position rather than requiring a dismount. Included mounting brackets attach to the pushtubes, while the system's no-alteration conversion lets owners move from manual to hydraulic operation without modifying that system. Its stated fit is for MotoAlliance plow systems, so the useful hands-on convenience depends on having that compatible plow setup; no pump output figures are provided.

Skip it if you need a standalone power unit for a different plow brand; this system is specified as an addition to MotoAlliance plows.

For a UTV owner with a MotoAlliance plow who wants to adjust blade angle from the seat, this system keeps the control close at hand. Its stated application is MotoAlliance equipment, not a general-purpose power unit.

Listed on Amazon as: DENALI Hydraulic System for UTV Snow Plow with Dash Switch

#3 · Best UniMount Fit

3. Mr. Snow Plow 49211 Kit

• Weight: 2.59 lb
• Dimensions: 12 x 6 x 6 in

Best for: Classic UniMount pump replacement.

Why it ranks #3: The replacement kit lists Western 49211, Fisher 7049, and Buyers 1306478 compatibility, including Western UniMount and Fisher MM1 systems.

Compatibility with Western UniMount systems and Fisher Minute Mount 1 electric-pump setups defines this Mr. Snow Plow hydraulic pump kit. It replaces several named Western, Fisher, and Buyers references, making it a targeted option for owners restoring or servicing classic electric-solenoid plow pumps rather than selecting a universal power unit.

The kit lists replacement references including Western 49211, Fisher 7049, and Buyers 1306478, giving buyers identifiable part cross-references for a service decision. Its stated fit covers classic Western UniMount systems using electric solenoid pumps and Fisher Minute Mount 1, as well as older, classic, and New Style electric-solenoid plow pumps. Because it is a replacement kit rather than a complete power unit, it is suited to existing compatible assemblies, not a fresh standalone installation.

Skip it if you need a new 12V power unit with tank and remote; Bailey's Maxim 253155 is listed as a complete snowplow unit.

This kit fits owners servicing compatible Western UniMount or Fisher Minute Mount 1 electric-solenoid pumps who can match the listed replacement references. It is not a standalone motor, tank, and control assembly.

Listed on Amazon as: MR. Snowplow Replaces Western 49211 Fisher 7049 Buyers 1306478 Hydraulic Pump KIT

#4 · Best Insta-Act Fit

4. Mr. Snow Plow 21501K-1 Kit

• Weight: 2.35 lb
• Dimensions: 12 x 6 x 6 in

Best for: Western Fisher 21501K-1 service kit.

Why it ranks #4: This pump kit replaces Western/Fisher 21501K-1 and includes an inlet filter kit, shaft seal repair kit, and installation tool.

A pump, pickup and inlet filter, shaft-seal repair kit, and installation tool make this Mr. Snow Plow package a service-focused replacement kit for specified Western and Fisher systems. Its compatibility list names Insta-Act full-size straight plows, EZ-V, first-generation MVP Legacy, and HT plows, giving the intended buyer a defined application range.

The included inlet filter kit and shaft seal repair kit address multiple components around a pump replacement, while the specialized shaft installation tool supports the seal-installation task. The stated replacement references include Western/Fisher 21501K-1 and 21501, and the compatibility details name several Fisher plow families. This is a parts kit rather than a complete reservoir-and-motor power unit, so it fits maintenance work on the listed equipment instead of a new standalone hydraulic installation.

Skip it if you need a complete power pack with motor and reservoir; Bailey's Maxim 253155 is listed as a 12V snowplow power unit.

Choose this kit for service or pump replacement on a listed Western or Fisher plow family, especially when the filter and seal components are useful. It does not supply a complete motor-and-reservoir unit.

Listed on Amazon as: MR. Snowplow Replaces Western/Fisher Part 21501K-1 Hydraulic Pump KIT

#5

5. Buyers 49211 Pump Kit

• Weight: 6.1 oz
• Dimensions: 9 x 6.88 x 7 in

Best for: Western Fisher 49211 replacement.

Why it ranks #5: A snow-plow replacement kit for Western/Fisher 49211 blade hydro systems; the listing specifically advises confirming compatibility with your unit.

Its stated match to the Western Fisher 49211 Blade Hydro Uni Mount identifies this Buyers Products hydraulic pump kit as a replacement-oriented choice, rather than a universal plow power unit. The compact listed dimensions may help when planning space around an existing assembly, but compatibility with the intended unit is the central buying consideration.

The product is identified as a new snow plow hydraulic pump kit for the Western Fisher 49211 Blade Hydro Uni Mount, giving owners of that named setup a focused replacement option. Its 9-by-6.88-by-7-inch dimensions provide a reference for evaluating the available installation space before work begins. The listing offers no pressure, flow, or included-component detail beyond calling it a kit, so buyers should base the decision on the specific named application rather than assume broader hydraulic compatibility.

Skip it if you need a complete power unit with specified flow and pressure; Bailey's Maxim 253155 lists both figures and a steel tank.

This is best suited to an owner replacing a pump for the named Western Fisher 49211 Blade Hydro Uni Mount application. Its listing lacks performance specifications, so it is not the clearest pick for sizing a new system.

Listed on Amazon as: The ROP Shop New Snow Plow Hydraulic Pump KIT for Western Fisher 49211 Blade Hydro Uni Mount

#6 · Largest Reservoir

6. SHORELEV 15L Power Unit

• Weight: 36.5 lb
• Dimensions: 11 x 11 x 25.52 in

Best for: Large-reservoir single-acting power.

Why it ranks #6: Its 12V single-acting unit has a 15L iron reservoir and a listed 3000 PSI maximum, and is marketed for snow plows as well as other equipment.

A 15-liter iron reservoir gives this SHORELEV power unit a substantial fluid capacity for 12V single-acting work, including snow plows. Its stated 3000 PSI capability also suits lifting and loading applications, making it a candidate for buyers seeking one assembled hydraulic unit for rugged equipment rather than a plow-specific pump kit.

The 15L iron tank is described as corrosion-resistant and leak-resistant, a practical consideration for equipment used in demanding environments. Its 12V single-acting system reaches up to 3000 PSI and is listed for snow plows, dump trailers, tow trucks, and agricultural equipment, giving it broad application beyond plowing. The unit is fully assembled and pre-tested, which supports a simpler installation workflow, but the single-acting configuration is the key constraint when selecting it for a hydraulic circuit.

Skip it if you need powered extension and retraction; SHORELEV's 8L double-acting unit has dual-solenoid bidirectional control.

Choose this SHORELEV unit for a 12V single-acting application where a 15L iron tank and up-to-3000-PSI capability suit the equipment. Check that single-acting operation matches the plow circuit before installation.

Listed on Amazon as: Hydraulic Power Unit 15 Quart with SAE#6 Connector, 12V DC Hydraulic Power Pump, 15L Single Acting Iron Reservoir, 3000 PSI for Dump Trailers, Tow Trucks, Snow Plows, Agricultural Equipment

#7

7. VEVOR Double-Acting Power Unit

• Weight: 34.6 lb
• Dimensions: 6.9 x 6.5 x 15.4 in

Best for: Compact double-acting power pack.

Why it ranks #7: This 12V double-acting unit lists a 3200 PSI relief setting, 2 GPM flow, and a 4.5L reservoir for buyers needing power up and down.

A 4.5-liter reservoir, 12V motor, and double-acting operation put the VEVOR unit in a compact power-pack format for hydraulic systems needing powered movement in both directions. It lists a maximum relief setting of 3200 PSI and 2 GPM flow, useful figures for assessing fit against a plow circuit's requirements.

The 3200 PSI maximum relief setting and 2 GPM flow provide concrete benchmarks when sizing this power unit, while double-acting operation supports both power-up and power-down functions. Its plastic tank is described as sturdy and resistant to cracking, and the assembled pack includes a handheld remote and two replacement SAE#6 connectors. Horizontal mounting is specified, so installation planning needs to allow for that orientation and the unit's 4.5L reservoir.

Skip it if you need blade-angle changes from an OEM-slot dash switch; MotoAlliance DENALI HYPro-MA11208_H offers that control for its plow system.

For buyers matching a 12V double-acting power pack to a circuit, VEVOR provides stated pressure and flow figures plus a remote. Its horizontal-mount requirement and 4.5L reservoir should suit the available installation space.

Listed on Amazon as: VEVOR Hydraulic Pump Double Acting 4 Way Hydraulic Power Unit Double Solenoid Hydraulic Power Pack 12V DC Hydraulic Power Pump with 4.5Liter Reservoir for Dump Trailer Car Lifting

#8

8. SHORELEV Double-Acting Unit

• Weight: 37.9 lb
• Dimensions: 11.02 x 11.02 x 27.9 in

Best for: Mobile double-acting control.

Why it ranks #8: The 12V power unit is marketed for snow plows and uses dual solenoids for bidirectional cylinder control, with an 8L plastic reservoir.

Dual solenoids provide bidirectional cylinder control, so this 12V SHORELEV unit can power both extension and retraction rather than relying on a one-way cycle. Its 8L plastic reservoir is described as lightweight and corrosion-resistant, a practical combination for mobile or outdoor equipment where carrying and exposure are considerations.

The double-acting arrangement and two solenoids support electrically controlled movement in both directions, which can reduce manual effort when operating a compatible cylinder. The 8L plastic tank resists corrosion and is positioned for portable, outdoor applications, while the pre-assembled unit can simplify setup compared with assembling components separately. It is listed for snow plows alongside dump and tow trucks, but the provided details do not give a pressure or flow figure for matching hydraulic performance.

Skip it if you need a listed pressure and flow rating to size a plow circuit; VEVOR's 4.5L double-acting unit states both.

This SHORELEV unit fits buyers needing 12V double-acting control and a corrosion-resistant plastic reservoir for mobile equipment. Confirm the circuit's performance requirements, since the supplied details do not include pressure or flow ratings.

Listed on Amazon as: Hydraulic Motor Dump Trailer Pump, 12V DC Double Solenoid Double Acting Hydraulic Power Unit, 8L Plastic Reservoir, for Dump Trucks, Snow Plows, Tow Trucks, and Industrial Machinery

#9

9. Nakkaa 4-Way Power Unit

• Weight: 37 lb

Best for: Safety-valve double-acting unit.

Why it ranks #9: This 12V four-way double-acting unit has a 4.5L reservoir and safety valve, but its listed use is less specifically tied to snowplow systems.

A safety valve intended to avoid overpressure is a key practical feature of Nakkaa's 12V, four-way double-acting power unit. Its 4.5L reservoir and stated quiet-running operation position it for owners seeking a compact hydraulic pack for lifting tasks, though the available listing does not supply pressure or flow figures for circuit sizing.

The four-way double-acting setup is described as delivering strong hydraulic power for lifting, while the safety valve addresses overpressure protection during operation. Nakkaa also cites fast startup and low noise, which can make operation less disruptive around a job site or backyard. With a 4.5L reservoir, it occupies a smaller stated tank capacity than larger power units, but buyers must evaluate whether its unspecified flow and pressure meet their plow's demands.

Skip it if you need stated pressure and flow for matching a plow circuit; VEVOR's 4.5L double-acting unit lists both.

Nakkaa suits buyers seeking a 12V double-acting pack with a safety valve for lifting work and a stated 4.5L tank. For snow plow use, the missing pressure and flow figures leave circuit matching unresolved.

Listed on Amazon as: Nakkaa 12V DC 4 Way Double Acting Hydraulic Power Unit 4.5L Reservoir

#10

10. ATRACYPART H2136201 Pump

Best for: High-flow gear-pump replacement.

Why it ranks #10: The cast-iron gear pump lists 15.3 GPM at 1000 RPM and plow controls as a possible use, but provides less snowplow-specific system information.

A stated flow of 15.3 gallons per minute at 1000 RPM makes the ATRACYPART H2136201 a high-flow gear-pump option for hydraulic systems that include plow controls or lift mechanisms. Its cast-iron housing and Teflon-coated bronze thrust plates speak to durability and wear resistance, while the specified spline shaft is a critical installation detail.

The listed 15.3 GPM flow at 1000 RPM supports buyers matching a pump to medium- or heavy-duty hydraulic demand, including plow controls and lift mechanisms. A cast-iron housing paired with Teflon-coated bronze thrust plates is described as offering thermal stability and abrasion resistance, relevant to sustained mechanical use. The 7/8-inch, 13-spline shaft specification helps identify the required drive connection, so installation planning should start with shaft compatibility rather than assuming it is a complete power unit.

Skip it if you need a self-contained 12V plow power unit; Bailey's Maxim 253155 includes a tank, motor, and remote.

Consider the H2136201 when replacing or specifying a gear pump for a system needing its stated flow and spline connection. It is not presented as a complete plow power pack, so the surrounding hydraulic components matter.

Listed on Amazon as: H2136201 Hydraulic Pump with 7/8"-13 Spline Shaft, 15.3 GPM at 100 RPM