Pressure washing businesses typically charge $50-$150 per hour in gross revenue, but hourly billing alone can underprice fast work and ignore travel, setup, insurance, chemicals, and equipment. A stronger model uses a minimum service charge, a production-based flat price, or $0.15-$0.40 per square foot, then checks whether the result meets the desired hourly revenue.
Key Facts and Quick Answer
- A practical commercial target is $50-$150 per billable hour before business expenses.
- A common area-based range is $0.15-$0.40 per square foot, with difficult surfaces priced higher.
- Many operators set a $150-$300 minimum service charge because small jobs consume travel and setup time.
- Pressure washing commonly uses 1,500-4,000 PSI or more; soft washing generally uses under 500 PSI with cleaning chemicals.
- A 1,000-square-foot driveway at $0.20-$0.35 per square foot produces a $200-$350 quote.
- The profitable number is based on total job time, not only time spent spraying water.
What Does the Hourly Rate Include?
A pressure washing hourly rate is gross customer revenue for productive field time, not the technician’s take-home pay. The rate should recover labor, payroll taxes, fuel, water, detergent, repairs, insurance, marketing, administration, travel, and profit.
A $100 hourly invoice does not equal $100 of wages. If a two-person crew works four on-site hours but spends one hour driving, loading, and unloading, the business has five labor hours before office work and maintenance. A $400 invoice therefore produces $80 per total labor hour, not $100.
Typical commercial rate bands
| Business situation | Gross billing target | Typical use |
|---|---|---|
| Solo operator, low overhead | $50-$85/hour | Small residential work |
| Established solo operator | $85-$125/hour | Driveways, patios, siding |
| Two-person crew | $120-$180/hour | Larger homes and commercial sites |
| High-risk or specialized work | $150-$250/hour | Oil stains, elevated access, restoration |
| Minimum service visit | $150-$300/job | Small or remote jobs |
These figures are typical planning ranges, not universal market prices. Local wages, insurance premiums, water access, licensing, weather, and customer density can move the required rate substantially.
Expert insight: The most common pricing mistake is dividing the desired wage by spray time. A contractor who wants $40 per working hour may need $100 or more in revenue per crew hour after non-billable time and operating costs.
How Much to Charge for Pressure Washing Per Hour
For straightforward residential cleaning, start around $75-$125 per productive hour for a solo operator and $120-$180 per crew hour for a two-person team, then verify the quote against square footage and difficulty. Use a minimum charge of approximately $150-$300 when a small job would otherwise fail to cover travel and setup.
Hourly pricing works best when the scope is uncertain, such as heavily neglected commercial concrete, post-construction cleanup, or stain removal that may require repeated treatments. It works poorly when the contractor becomes faster through better equipment and experience, because the customer may perceive efficiency as a reason to pay less.
A practical calculation is:
Required hourly revenue = total annual operating costs + owner compensation + profit, divided by annual billable hours.
For example, a solo operator targeting $70,000 for compensation and profit, with $35,000 in annual operating costs and 1,000 billable hours, needs:
($70,000 + $35,000) ÷ 1,000 = $105 per billable hour.
The 1,000-hour assumption matters. A 40-hour workweek does not provide 2,080 billable hours because weather, estimates, travel, maintenance, scheduling, and cancellations consume time.
Why Is Hourly Pricing Risky?
Hourly billing is risky because it charges for elapsed time instead of customer value and production output. An experienced operator may clean a surface in half the time of an inexperienced operator while using better equipment and producing a better result.
Hourly pricing also creates four operational problems:
- Customers may worry that the final bill is open-ended.
- Contractors may be tempted to work slowly, damaging trust.
- Travel and setup may be disputed unless the agreement defines billable time.
- Difficult stains can create an argument about whether extra time was necessary.
A flat quote avoids most of these problems. The customer knows the price, while the contractor keeps the benefit of efficient routing, correct nozzle selection, and disciplined surface preparation.
When hourly billing makes sense
Use hourly billing when the scope cannot be measured reliably or when the customer controls the work sequence. Examples include:
- Construction-site cleanup with changing debris conditions.
- Graffiti removal requiring uncertain chemical dwell time.
- Equipment, fleet, or industrial cleaning billed by technician time.
- Emergency cleanup where access and contamination are unknown.
- Additional work discovered after the approved scope.
Put a written cap or approval threshold in the estimate. For example, bill $125 per crew hour after the first four hours, but require customer approval before exceeding six hours.
How Do Pressure Washing and Soft Washing Differ?
Pressure washing uses mechanical force from pressurized water, while soft washing uses cleaning solution and low-pressure application to remove organic growth with less risk of surface damage. Pressure washing commonly operates around 1,500-4,000 PSI or higher, while soft washing generally stays below 500 PSI.
| Method | Typical pressure | Primary cleaning action | Common applications |
|---|---|---|---|
| Pressure washing | 1,500-4,000+ PSI | Water impact and shear force | Concrete, brick, pavers |
| Soft washing | Under 500 PSI | Chemical dwell and rinsing | Roofs, stucco, vinyl siding |
| Hot-water washing | 1,500-4,000 PSI | Heat plus water impact | Grease, food residue |
| Steam or low-pressure detail | Under 1,500 PSI | Heat, detergent, controlled rinse | Delicate equipment |
Pressure does not equal cleaning quality. A high-pressure nozzle can etch concrete, strip paint, force water behind siding, damage mortar, or remove roof granules. Sodium hypochlorite solutions can remove algae and mildew effectively, but concentration, runoff control, plant protection, and rinsing must be managed.
What the equipment actually does
A motor drives a pump that moves water through a restricted nozzle. The pump’s gallons-per-minute rating determines water volume, while PSI describes pressure force. Cleaning speed depends on both values, nozzle pattern, operator movement, surface condition, and chemical dwell time.
A useful equipment comparison is cleaning units:
Cleaning units = PSI × GPM.
A 3,000 PSI machine flowing 4 GPM has 12,000 cleaning units. That figure does not predict every result, but it helps explain why a higher-flow machine can outperform a smaller machine at the same pressure.
Expert insight: Many beginners chase PSI and overlook GPM. For large concrete areas, water volume and the correct surface cleaner often improve production more than a modest pressure increase.
Should You Charge by the Square Foot or by the Job?
Square-foot pricing is usually the clearest starting point for measurable surfaces, while flat-rate pricing is often better for complete homes and bundled services. Hourly pricing remains useful for uncertain work, but every method should be checked against expected total labor time.
| Surface or service | Typical rate | Example area | Example subtotal |
|---|---|---|---|
| Driveway concrete | $0.15-$0.35/sq. ft. | 1,000 sq. ft. | $150-$350 |
| Patio or walkway | $0.20-$0.40/sq. ft. | 500 sq. ft. | $100-$200 |
| House siding wash | $0.20-$0.50/sq. ft. | 2,000 sq. ft. | $400-$1,000 |
| Deck cleaning | $0.30-$0.75/sq. ft. | 400 sq. ft. | $120-$300 |
| Roof soft wash | $0.25-$0.75/sq. ft. | 1,500 sq. ft. | $375-$1,125 |
The table uses typical planning ranges. A contractor should raise the price for steep access, heavy growth, oil contamination, delicate materials, extensive masking, or poor water access.
A square-foot quote should still have a minimum. A 200-square-foot walkway at $0.20 produces only $40, which will not cover a 45-minute drive, loading, chemical preparation, and payment processing. A $175 minimum converts that small job into a viable service call.
How Long Do Common Pressure Washing Jobs Take?
Job duration depends on surface condition, water supply, equipment flow, access, and whether the estimate includes setup and cleanup. The following production windows are typical for an experienced operator using suitable equipment.
| Job type | Typical field time | Typical customer price | Main time variable |
|---|---|---|---|
| Small walkway | 45-90 minutes | $150-$250 | Travel and setup |
| Single-car driveway | 1-2 hours | $175-$350 | Oil and embedded dirt |
| Two-car driveway | 1.5-3 hours | $250-$500 | Surface area and edging |
| House siding wash | 2-5 hours | $400-$1,000 | Stories and plant protection |
| Medium deck | 2-4 hours | $250-$700 | Wood condition and rinsing |
The price should reflect the full appointment, not only active washing. Include inspection, moving furniture, protecting outlets, mixing solution, pre-treatment, surface cleaning, post-rinsing, photographs, and customer walkthrough.
A practical quote process
- Measure the surface. Use property plans, satellite tools, a measuring wheel, or a consistent visual estimate.
- Identify the material. Concrete, pavers, wood, vinyl, stucco, brick, and roofing require different methods.
- Grade the condition. Record algae, rust, oil, oxidation, paint failure, efflorescence, and previous damage.
- Estimate production time. Add setup, protection, treatment, rinsing, loading, and disposal.
- Apply the unit price. Use square feet, linear feet, fixtures, or a flat service package.
- Check the hourly floor. Divide the proposed price by total expected labor and travel hours.
- State exclusions. Identify repairs, permanent stains, ladder work, water supply, and inaccessible areas.
- Obtain written approval. Confirm scope, price, payment terms, weather policy, and additional-work authorization.
This process prevents a low surface rate from hiding a high-risk job.
What Costs Must Your Rate Recover?
A sustainable rate recovers direct job costs and the overhead that remains when no job is scheduled. Ignoring either category produces revenue without dependable profit.
| Cost category | Typical planning basis | Example consequence |
|---|---|---|
| Fuel and transport | $10-$40/job | Longer routes reduce margin |
| Chemicals and detergents | $5-$50/job | Roof and stain work costs more |
| Equipment maintenance | 5%-10% of equipment value/year | Pumps and hoses eventually fail |
| General liability insurance | $1,000-$4,000+/year | Higher-risk work raises premiums |
| Payment processing | About 2%-4% of revenue | Card payments reduce collected revenue |
| Labor burden | 10%-30% above wage | Payroll taxes and coverage add cost |
Actual figures vary by region, policy, fleet, and legal structure. Keep a job-costing record with quoted price, labor hours, driving time, chemical use, fuel, refunds, and callbacks.
Expert insight: A callback is more expensive than the return visit. It also consumes scheduling capacity, fuel, chemicals, and reputation while producing no new sale. A quote that prevents one avoidable surface-damage claim can outperform a slightly higher close rate.
How Should Location and Job Risk Change the Price?
Local pricing changes because operating costs and customer density differ, not because one national hourly number applies everywhere. Dense service areas can reduce drive time, while rural routes may require a travel charge or higher minimum.
Increase the price when a job includes:
- More than 30 minutes of one-way travel.
- Two-story access, steep slopes, or difficult hose routing.
- Fragile surfaces or uncertain paint and oxidation.
- Heavy oil, rust, chewing gum, or efflorescence.
- Extensive masking around doors, plants, outlets, or HVAC equipment.
- Limited water supply or a requirement to bring a tank.
- Commercial insurance, certificates, after-hours access, or traffic control.
Do not promise complete removal of permanent stains. Pressure washing can remove surface soil while leaving rust, oil penetration, oxidation, old paint failure, or etching visible. State the likely outcome before accepting payment.
What Should a Written Estimate Include?
A professional estimate should identify the surfaces, method, price, assumptions, and limits. A short description such as “wash house” leaves too much room for disputes.
Include:
- Property address and customer contact details.
- Exact surfaces and approximate measurements.
- Cleaning method, such as surface cleaning or low-pressure soft washing.
- Total price and any minimum service charge.
- What the customer must move or provide.
- Protection steps for plants, outlets, doors, and delicate items.
- Exclusions, including repairs and permanent stains.
- Weather cancellation and rescheduling terms.
- Payment timing, deposits, taxes, and accepted methods.
- Approval rules for extra work.
The estimate should also state whether water and electricity are supplied by the customer. A missing water source can turn a profitable route into a delayed appointment.
Common Pricing Mistakes and Limitations
Pressure washing is not suitable for every surface or contaminant. Excessive force can damage mortar, wood fibers, roof coverings, paint, window seals, and siding joints, while chemicals can harm plants, fish, metals, and unprotected finishes.
Avoid these mistakes:
- Pricing a roof by pressure instead of using a suitable soft-wash process.
- Treating PSI as the only measure of machine performance.
- Quoting without counting setup and travel.
- Using one rate for concrete, wood, roofing, and siding.
- Guaranteeing removal of stains that have penetrated the material.
- Allowing runoff to enter storm drains or neighboring property.
- Starting work without documenting existing damage.
- Charging a low introductory price that cannot support repeat service.
Local environmental rules may restrict chemical discharge, stormwater runoff, and wastewater handling. Contractors should check municipal requirements and follow product labels, manufacturer instructions, and applicable occupational safety rules.
Frequently Asked Questions About how much to charge for pressure washing per hour
Is $50 an hour enough for a pressure washing business?
$50 per hour may be adequate as gross revenue for a low-overhead solo operator in a dense service area, but it is often too low after travel, insurance, chemicals, maintenance, taxes, and unpaid estimating time. Calculate the rate using total appointment hours and annual billable capacity rather than spray time alone.
Should I charge extra for travel?
Charge a travel fee, a higher minimum, or a zone-based price when driving materially reduces productive capacity. A common planning rule is to review any trip exceeding 30 minutes each way. Route density matters more than mileage because several nearby jobs can absorb travel without requiring separate charges.
Do customers prefer hourly or flat-rate quotes?
Most residential customers prefer a flat quote because the final cost is known before work begins. Contractors often prefer flat pricing when the scope is measurable because efficient work improves margin. Hourly billing is more defensible for uncertain commercial cleaning, emergency work, and customer-requested additions.
How much should I charge for a small driveway?
A small driveway commonly requires a $150-$300 minimum, even when a square-foot calculation produces a lower number. A single-car driveway may total $175-$350, depending on oil, access, water supply, edging, and local operating costs.
Should I offer discounts for recurring cleaning?
Recurring service can justify a modest discount when it reduces setup time and heavy buildup, but the discount should not reduce the required crew-hour revenue. A 10%-15% reduction may work when the customer commits to a documented schedule and predictable access.
Do I need to charge sales tax?
Sales-tax obligations depend on the location, business structure, and classification of cleaning services. Register and collect tax when required by the applicable state or local authority, then show tax separately from the service price so the quoted revenue is not overstated.
Conclusion
The best answer to how much to charge for pressure washing per hour is usually $50-$150 in gross hourly revenue, with many established operators targeting the upper half after accounting for labor, travel, equipment, chemicals, insurance, and profit. Use hourly billing for uncertain work, but price measurable surfaces by the job or at roughly $0.15-$0.40 per square foot, enforce a minimum charge, and verify every quote against total appointment time.


