Best 4Runner Leveling Kit: Compare Front and Full-Lift Kits

#1 · Best Overall

1. KSP 2-Inch Strut Spacers

• Material: Aluminum
• Material Type: Aluminum

Best for: Front lift with hardware included.

Why it ranks #1: Lists 2-inch front lift for 4Runner 2WD and 4WD fitment, includes hardware and instructions, and recommends an alignment after installation.

A two-inch front lift for the 4Runner comes in a kit that includes the strut spacers, bolts, nuts, washers, and instructions. That bundled hardware supports a more complete installation workflow, while the listed fitment spans 2003–2024 4Runner 2WD and 4WD models, except XREAS suspension.

KSP states that the kit raises the front two inches, while also noting that suspension geometry makes lift height different from spacer thickness. Its forged aircraft-grade aluminum construction is paired with all listed mounting hardware and instructions, keeping the installation components together. The manufacturer recommends an alignment after installation, which gives owners a clear follow-up step for suspension changes. Fitment also covers 2005–2023 Tacoma models with six-lug wheels and 2007–2015 FJ Cruiser models.

Skip it if you want rear spacers in the kit; this package lists front strut spacers only, while KSP Performance 9K017 includes rear coil spring spacers.

This fits 4Runner owners seeking a front-only lift with the mounting hardware and instructions in one package. Check the XREAS exclusion, and plan for the manufacturer-recommended alignment after installation.

Listed on Amazon as: KSP 2" lift kits for Tacoma 2005-2023, Leveling Kit Lift Strut Spacers

#2 · Two-Year Warranty

2. Dynofit 2-Inch Leveling Kit

• Material: Aluminum
• Material Type: Aluminum

Best for: Front-only lift for multi-model owners.

Why it ranks #2: Offers a stated 2-inch front lift for 4Runner models and forged aluminum spacers, with a listed two-year manufacturer warranty.

A forged T6-treated aluminum front spacer raises the 4Runner’s front suspension by a stated two inches, giving owners a way to address the front stance without adding rear spacers. The kit also covers a broad range of 4Runner model years, alongside Tacoma and FJ Cruiser applications.

The stated two-inch front lift is paired with a listed real spacer thickness of about 1-1/10 inches, so buyers can distinguish suspension lift from spacer size. Dynofit says installation takes one to two hours without special tools, a practical point for a straightforward home project. The forged aluminum has a black anodized surface, while included hardware completes the front-spacer package. Fitment excludes 4Runner models with XREAS suspension, an important boundary before planning installation.

Skip it if you need rear lift spacers or have XREAS suspension; this kit supplies front spacers only and excludes XREAS models.

This suits 4Runner owners seeking a front-only two-inch lift and a listed no-special-tools installation. It is not a full leveling kit with rear spacers, and XREAS-equipped models are outside its stated fitment.

Listed on Amazon as: Dynofit 2 Inch Leveling Lift Kit for Toyota Tacoma (2005-2023), 4Runner (2003-2024) and FJ Curise (2007-2015), Raise Front Suspension 2in, Set of 2Pcs Forged Aluminum Strut Spacers Level Kit

#3 · Front-and-Rear Lift

3. KSP Full Leveling Lift Kit

• Material: Carbon Steel
• Material Type: Carbon Steel

Best for: Full lift for larger-tire plans.

Why it ranks #3: Provides a 3-inch front and 2-inch rear setup for listed 4Runner fitment, though it excludes Limited models with X-REAS and newer TRD PRO models.

A 3-inch front and 2-inch rear lift pairs with stated clearance for tires up to 35 inches, making this KSP kit relevant to 4Runner owners planning a larger-tire setup. The listing also warns that rubbing may occur under extreme articulation, an important qualification for trail use.

The front and rear lift combination provides a complete stance change rather than a front-only adjustment, while the listed tire capacity gives buyers a reference for wheel-and-tire planning. KSP identifies heavy-duty carbon steel for the front lift spacers and SGS-tested lug bolts as construction and security details. Fitment covers 2003–2024 4Runner and 2007–2015 FJ Cruiser models, but excludes 2018-and-newer TRD PRO and Limited models with X-REAS hydraulic struts.

Skip it if you have a 2018-or-newer TRD PRO or a Limited with X-REAS; this kit excludes those models, while maXpeedingrods KJ1146 also excludes them.

This suits eligible 4Runner owners planning a front-and-rear lift and tires up to the listed 35-inch size. Account for the stated rubbing possibility at extreme articulation, and note the TRD PRO and X-REAS exclusions.

Listed on Amazon as: KSP 4Runner Full Leveling Lift Kits 3"F+2"R

#4 · Made in USA

4. MotoFab 3-Inch Lift Kit

• Material: Carbon Steel and Billet Aluminum
• Material Type: Carbon Steel and Billet Aluminum

Best for: USA-made lift for 2010–2024 models.

Why it ranks #4: Lists 2010–2024 4Runner fitment, a 3-inch front and 1.5-inch rear lift, and includes front and rear spacers plus hardware.

Made in the USA, this MotoFab kit combines a 3-inch front lift with a 1.5-inch rear lift for 2010–2024 Toyota 4Runner models. The included front and rear spacers and mounting hardware make it a complete listed package for owners seeking clearance and a more level appearance.

The different front and rear lift figures give buyers a clear description of the intended stance change, while the included front coil spacers, rear coil spacers, and hardware cover both ends of the installation. Carbon steel and billet aluminum are the listed materials, and instructions are included with the kit. MotoFab specifies 2010–2024 4Runner fitment but excludes XREAS suspension, so that suspension configuration is a key boundary when checking an application.

Skip it if you have XREAS suspension; this kit excludes it, while Rough Country 764RED lists 2010–2024 4Runner 4WD fitment without an XREAS exclusion in the supplied details.

This is for 2010–2024 4Runner owners seeking a USA-made front-and-rear lift with instructions and hardware included. Its 3-inch front and 1.5-inch rear figures are the key stance consideration, and XREAS is excluded.

Listed on Amazon as: MotoFabLifts 3" Front 1.5" rear Leveling Lift Kit for 2010-2024 fits Toyota 4Runner Made in the USA Lift pucks

#5 · Aluminum Front Spacers

5. maXpeedingrods 3/2 Lift Kit

Best for: Front-and-rear lift for eligible models.

Why it ranks #5: Lists 4Runner 2WD and 4WD fitment with a 3-inch front and 2-inch rear lift; excludes X-REAS and specified TRD PRO models.

A stated 3-inch front and 2-inch rear lift gives this maXpeedingrods kit a full-vehicle approach for 2003–2024 4Runner owners. The front spacers are made from 6061 aluminum, while the listing clearly rules out Limited models with X-REAS and 2018-and-newer TRD PRO models.

The front-and-rear lift figures offer a larger change at the front than at the rear, helping buyers assess the intended stance before choosing a kit. The front strut spacer’s 6061 aluminum construction is the listed material detail, and the stated 4Runner application spans 2003–2024 in both 2WD and 4WD. Fitment exclusions matter: Limited models with X-REAS hydraulic struts and 2018-and-newer TRD PRO models are expressly excluded. FJ Cruiser 2WD and 4WD models from 2007–2015 are also listed.

Skip it if you have a Limited with X-REAS or a 2018-and-newer TRD PRO; those are excluded, while SCITOO 847048 lists 4Runner fitment through 2024.

This suits eligible 4Runner owners looking for a front-and-rear lift with a specified 6061 aluminum front spacer. Check the listed exclusions carefully, especially for Limited models and newer TRD PRO versions.

Listed on Amazon as: maXpeedingrods 3" Front & 2'' Rear Lift Kit for Toyota 4Runner 2003-2024

#6

6. PraOents 3/2 Leveling Kit

• Material: Alloy Steel
• Material Type: Alloy Steel

Best for: Front-and-rear lift for 4WD use.

Why it ranks #6: Offers a 3-inch front and 2-inch rear lift for listed 4Runner and FJ Cruiser 4WD applications, making it a full-lift alternative.

A 3-inch front and 2-inch rear lift gives this kit a matched front-and-rear setup for 4Runner 4WD owners seeking a changed stance at both ends. Its stated application also includes 4WD FJ Cruiser models, while the listing cautions that lift height is not the same as kit thickness.

The 3-inch front and 2-inch rear lift figures describe the intended change at each end, helping buyers compare the kit with front-only alternatives. Alloy steel is the listed material, and the package is identified as a leveling lift kit for 2003–2024 4Runner and FJ Cruiser models. The geometry note matters during planning: lift height does not equal spacer thickness. The supplied fitment description specifies 4WD, so 2WD owners should not treat it as a confirmed application.

Skip it if you drive a 2WD 4Runner; the listing specifies 4WD, while SCITOO 847048 lists 2003–2024 4Runner fitment without that restriction.

This is for 4WD 4Runner owners who want stated lift at both the front and rear, rather than a front-only spacer setup. Its supplied application is 4WD, so it is not the choice for a 2WD vehicle.

Listed on Amazon as: Leveling Lift Kit for 2003-2024 4Runner, 2007-2015 FJ Cruiser, 3 inch Front and 2 inch Rear Strut Spacers Leveling Kit

#7

7. PROEZE 2.5-Inch Spacers

• Material: Aluminum
• Material Type: Aluminum

Best for: Two-and-a-half-inch front lift.

Why it ranks #7: Gives the listed 4Runner 2WD and 4WD applications a 2.5-inch front lift with forged aluminum strut spacers; XREAS is excluded.

A stated 2.5-inch front lift gives the PROEZE kit a clear target for 2003–2023 4Runner owners seeking a front-only stance change. Its forged aluminum strut spacers cover the front suspension, while the listing explains that spacer thickness is less than the resulting lift height.

The 2.5-inch lift figure describes the stated front rise, and the suspension-geometry note helps explain why the spacer itself is thinner than that measurement. Forged aluminum is the listed material, with the kit identified as front strut spacers. Fitment spans 2003–2023 4Runner 2WD and 4WD models, excluding XREAS suspension, along with specified Tacoma and FJ Cruiser applications. The listed 4Runner range ends in 2023, a relevant boundary for newer-model owners.

Skip it if you own a 2024 4Runner; this listing ends at 2023, while Dynofit FF-L015-2 lists 4Runner fitment through 2024.

This is for 2003–2023 4Runner owners looking for a stated 2.5-inch front lift from forged aluminum spacers. It is a front-only kit, and the supplied fitment does not extend to 2024 models.

Listed on Amazon as: PROEZE 2.5" Leveling Lift Kits for 2005-2023 Tacoma 2WD 4WD, 2003-2023 4Runner 2WD 4WD and 07-15 FJ Cruiser 2WD 4WD, 2.5 inch Forged Front Strut Spacers Leveling Kits

#8

8. Rough Country 2-Inch Lift Kit

• Material: Aluminum, Metal, Nylon
• Material Type: Aluminum, Metal, Nylon

Best for: At-home installation with support.

Why it ranks #8: Lists a 2-inch lift for 4WD models and includes coil spring spacers, strut spacers, and hardware; its stated fitment is narrower than several alternatives.

Rough Country pairs a two-inch lift with an at-home bolt-on installation approach and company support, making this kit relevant to 2010–2024 4Runner 4WD owners considering a home project. Anodized red aluminum front spacers add a specific material and finish detail to the package.

The kit includes front strut spacers, rear coil spring spacers, and hardware, so it addresses both ends of the suspension rather than only the front. Rough Country says the lift increases ground clearance, levels the factory nose-down rake, and maintains factory ride quality. The at-home bolt-on description is paired with a recommendation that a certified technician install lift systems, with suspension knowledge and post-install checks required. That guidance is important when deciding whether to DIY.

Skip it if you plan to install without suspension knowledge; Rough Country calls for certified-technician installation, while Dynofit FF-L015-2 says no special tools are needed.

This fits 2010–2024 4Runner 4WD owners seeking a two-inch lift, rear spacers, and the stated ground-clearance benefit. Consider Rough Country’s technician recommendation before treating the bolt-on installation as a solo project.

Listed on Amazon as: Rough Country 2" Lift Kit for 2010-2024 Toyota 4-Runner 4WD – 764RED

#9

9. SCITOO 4Runner Leveling Kit

Best for: Rake reduction with tire clearance.

Why it ranks #9: Lists broad 4Runner model fitment and says it reduces factory rake, but the supplied product details do not specify a lift height.

SCITOO says its leveling kit reduces factory rake and adds fender distance for larger tires and wheels, giving 4Runner owners two practical reasons to consider the setup. Its fitment lists 2003–2024 4Runner models and 2007–2014 FJ Cruiser models, with original OEM ride quality retained.

Reducing factory rake addresses the vehicle’s front-to-rear stance, while added fender distance speaks to planning for larger tires and wheels. SCITOO also states that the kit maintains original OEM ride quality, a relevant consideration for owners balancing appearance changes with everyday driving. The listing covers 2003–2024 Toyota 4Runner and 2007–2014 FJ Cruiser models. It does not provide a lift-height figure in the supplied details, so buyers cannot compare its stated height with kits listing specific measurements.

Skip it if you need a specified lift height before choosing; SCITOO provides no figure here, while KSP Performance 9K017 lists 3-inch front and 2-inch rear lift.

This suits 4Runner owners focused on reducing factory rake, adding tire clearance, and retaining the stated OEM ride quality. If a specific lift measurement is essential to your setup, the supplied listing does not provide one.

Listed on Amazon as: SCITOO Leveling lift kit Compatible with Toyota For 4Runner 2003-2024

#10

10. Rough Country 2025 Leveling Kit

• Material: Composite, Metal
• Material Type: Composite, Metal

Best for: Sixth-generation 4Runner stance correction.

Why it ranks #10: Is specifically described for the 2025 4Runner and includes strut shims, strut spacers, and hardware, so its stated fitment is comparatively narrow.

Rough Country lists this bolt-on leveling kit specifically for the 2025 4Runner, with 1.5–2 inches of increased ground clearance. That model-year focus makes it a targeted option for sixth-generation owners seeking a changed stance, rather than a broad fitment choice for earlier 4Runners.

The included strut shims, strut spacers, and hardware form the listed installation package, while the bolt-on description identifies the installation style. Rough Country says the kit maintains factory ride quality and alignment specs, which connects the lift to day-to-day handling expectations without requiring buyers to infer a change. The advertised clearance increase and approach-angle benefit speak to trail planning. The stated application is the 2025 4Runner, so earlier model years are not listed as compatible.

Skip it if you own a 2003–2024 4Runner; this listing is for 2025, while MotoFabLifts 4R-3F-1.5R lists 2010–2024 fitment.

This is for 2025 4Runner owners who want a bolt-on stance adjustment with stated ground-clearance gains and retained factory alignment specs. Its listed fitment is limited to the 2025 model year.

Listed on Amazon as: Rough Country 1.5" Bolt-on Leveling Kit for Toyota 4Runner (2025) – Increases Ground Clearance, Levels Stance, Easy Upgrade