A strong electric radiator fan should match your radiator’s available space and airflow needs, with useful controls or mounting hardware for your installation. For a 16-inch setup, the STMGW 16 inch Electric Radiator Fan with Thermostat Wiring Switch Relay Kit stands out for its listed 3000 cfm capacity, 120-watt motor, reversible blades, and included wiring components. This roundup also includes compact 12-inch fans, higher-capacity 16- to 17-inch options, and models with different levels of installation hardware.
Compare the listed dimensions and airflow figures carefully: fan diameter alone does not confirm that a fan will fit your radiator or clear nearby parts. The specifications help narrow the choices, but vehicle fitment and installation details still need checking before you buy.
The STMGW 16 inch Electric Radiator Fan with Thermostat Wiring Switch Relay Kit is the strongest all-around pick in this group. It combines a listed 3000 cfm airflow capacity and 120-watt motor with reversible 10-blade airflow and a thermostat kit set to turn on at 180°F and off at 165°F. The listing also specifies a 40-amp relay and 30-amp circuit breaker.
Check radiator dimensions, airflow direction, and electrical requirements before installation; universal fit claims do not establish fitment for every vehicle.
Our Top Picks
Best OverallLists 3000 cfm and a 120-watt motor, plus reversible blades, thermostat controls, a 40-amp relay, and a 30-amp circuit breaker.
View on Amazon
Best Reversible KitThis 16-inch, 12-volt fan is listed at 3000 rpm and includes a thermostat wiring switch relay kit; its blades are reversible.
View on Amazon
Thermostat IncludedThe 16-inch, 120-watt fan includes a thermostat kit with a 180°F turn-on and 165°F turn-off temperature, plus mounting hardware.
View on Amazon- Highest Capacity ProForm Electric Cooling Fan
- Strongest Motor American Volt 16-17-Inch Fan
Compare the radiator fan options
| # | Product | Air Flow Capacity | Material | Wattage | Voltage | Buy |
|---|---|---|---|---|---|---|
| 1 | 1. STMGW 16-Inch Fan KitBest Overall | 3000 cfm | Brass | 120 W | 12 V | View on Amazon |
| 2 | 2. labwork 16-Inch Fan KitBest Reversible Kit | — | No | 120 W | 12 V | View on Amazon |
| 3 | 3. BLACKHORSE-RACING 16-Inch FanThermostat Included | 3000 cfm | Plastic | 120 W | 12 V | View on Amazon |
| 4 | 4. ProForm Electric Cooling FanHighest Capacity | — | — | — | — | View on Amazon |
| 5 | 5. American Volt 16-17-Inch FanStrongest Motor | 3189 cfm | Plastic | 180 W | 12 V | View on Amazon |
| 6 | 6. Mishimoto MMFAN-12Low-profile 12-inch upgrade | 1150 cfm | Plastic | 98 W | 12.25 V | View on Amazon |
| 7 | 7. Auto Dynasty 16-Inch FanSlim universal 16-inch fan | 1550 cfm | Plastic | 80 W | 12 V | View on Amazon |
| 8 | 8. Thomletha 16-Inch Fan KitDirect-replacement cooling fan | 3000 cfm | Metal, Plastic | 80 W | 602 V | View on Amazon |
| 9 | 9. DNA Motoring 12-Inch FanSlim engine-bay clearance | — | Plastic | 80 W | 12 V | View on Amazon |
| 10 | 10. BLACKHORSE-RACING 12-Inch FanCompact 12-inch puller fan | 800 cfm | Aluminum | 80 W | 12 V | View on Amazon |
Detailed Reviews: Best Electric Radiator Fan

#1 · Best Overall
1. STMGW 16-Inch Fan Kit
- Air Flow Capacity: 3000 cfm
- Material: Brass
- Wattage: 120 W
- Voltage: 12 V
Best for: Thermostat-controlled reversible airflow.
Why it ranks #1: Lists 3000 cfm and a 120-watt motor, plus reversible blades, thermostat controls, a 40-amp relay, and a 30-amp circuit breaker.
A reversible 16-inch fan with a 180°F-on, 165°F-off thermostat gives the STMGW kit both airflow-direction flexibility and automatic temperature switching. Its listed 3,000 CFM capacity and 120-watt motor make it a substantial 12-volt cooling option for automotive installations.
The fan comes configured as an air puller, and its reversible blades and wiring let an installer change the airflow arrangement when the setup calls for it. A brass thermostat probe uses a 3/8-inch NPT thread, with a 1/2-inch NPT adapter included, offering specified connection options. The package facts also identify a wiring harness, 40-amp relay, and 30-amp circuit breaker, which bring key electrical control components together with the fan.
- Listed airflow capacity of 3,000 CFM
- Thermostat switches on at 180°F and off at 165°F
- Reversible fan and wiring
- Includes wiring harness, relay, and circuit breaker
- Configured as a puller out of the box; changing airflow requires reversing the setup.
Skip it if you want a 16-inch fan with a published 3,400 CFM rating; the ProForm PFM67036 lists that airflow capacity.
Choose this STMGW kit for a 12-volt automotive setup needing thermostat control, reversible airflow, and included electrical components. It arrives configured as a puller, so account for the wiring and blade reversal if your installation needs a pusher.
Full product details
| Brand | STMGW |
|---|---|
| Air Flow Capacity | 3000 cfm |
| Compatible Devices | Automotive Vehicles |
| Included Components | fans |
| Manufacturer | JIUAUTOPARTS |
| Material | Brass |
| Voltage | 12 volts |
| Wattage | 120 watts |
Listed on Amazon as: 16 inch Electric Radiator Fan with Thermostat Wiring Switch Relay Kit
View on Amazon
#2 · Best Reversible Kit
2. labwork 16-Inch Fan Kit
- Material: No
- Wattage: 120 W
- Voltage: 12 V
Best for: Reversible fan with thermostat kit.
Why it ranks #2: This 16-inch, 12-volt fan is listed at 3000 rpm and includes a thermostat wiring switch relay kit; its blades are reversible.
A reversible 16-inch fan paired with a thermostat, wiring, switch, and relay kit gives the labwork package flexibility in airflow direction and control. Its listed 3,000 RPM speed and 120-watt, 12-volt electrical specifications make it a substantial option for classic engines and modern vehicles.
The product is described for automobile air-conditioning heat dissipation systems as well as classic engines and modern vehicles, giving it a broad stated application range. Reversible operation lets the installer select the fan direction required for the setup. Its copper-wire motor is described as heat-resistant and corrosion-resistant, while the included thermostat wiring, switch, and relay kit brings control components together with the 16-inch fan. The supplied specifications do not state a fan thickness or airflow capacity.
- Reversible 16-inch fan
- Listed speed of 3,000 RPM
- Thermostat wiring, switch, and relay kit included
- Copper-wire motor described as heat- and corrosion-resistant
- No fan thickness or airflow capacity is specified in the supplied details.
Skip it if you require a published CFM figure to compare airflow; the Auto Dynasty 16-inch fan lists 1,550 CFM.
This labwork kit suits buyers seeking a reversible 16-inch fan with thermostat-related wiring components for a classic engine or modern vehicle. Check the application and installation needs carefully, since supplied details do not give thickness or CFM.
Full product details
| Brand | labwork |
|---|---|
| Coil Voltage | 12 volts |
| Contact Material | No |
| Included Components | 1 x 16" Electric Radiator Fan HIGH 3000+CFM Thermostat Wiring Switch Relay KIT |
| Manufacturer | labwork |
| Maximum Switching Voltage | 12 volts |
| Minimum Switching Voltage | 12 volts_of_direct_current |
| Operation Mode | Electric |
| Wattage | 120 watts |
Listed on Amazon as: labwork 16" Electric Radiator Fan 3000+CFM Thermostat Kit
View on Amazon
#3 · Thermostat Included
3. BLACKHORSE-RACING 16-Inch Fan
- Air Flow Capacity: 3000 cfm
- Material: Plastic
- Wattage: 120 W
- Voltage: 12 V
Best for: Thermostat-controlled 16-inch cooling.
Why it ranks #3: The 16-inch, 120-watt fan includes a thermostat kit with a 180°F turn-on and 165°F turn-off temperature, plus mounting hardware.
A 180°F turn-on and 165°F turn-off thermostat gives this 16-inch BLACKHORSE-RACING fan automatic temperature-based switching, reducing the need to manage the fan manually. Its 12-volt, 120-watt motor and listed 3,000 CFM airflow suit buyers seeking a larger radiator fan with a wiring and thermostat kit included.
The included brass probe threads into a 3/8-inch NPT opening, and a 1/2-inch NPT adapter adds another stated thread option for thermostat installation. Its 16.05-inch diameter and 3.27-inch thickness are useful dimensions to consider when planning radiator space, while the listed 12-volt supply and 11-amp maximum draw inform electrical planning. Mounting brackets and tie straps are included, so the package provides mounting hardware alongside the fan and thermostat controls.
- Listed airflow capacity of 3,000 CFM
- Thermostat switches on at 180°F and off at 165°F
- Includes mounting brackets and tie straps
- Sealed ball bearing and balanced blades
- Maximum stated fan speed is 2,000 RPM.
Skip it if you need a 12-inch fan for a tighter opening; the BLACKHORSE-RACING ER9803 is a slimmer, smaller-diameter option.
Choose this for a 16-inch radiator installation where automatic thermostat switching and included mounting hardware matter. Check the 16.05-inch diameter, 3.27-inch thickness, and stated 11-amp maximum draw against your space and electrical setup.
Full product details
| Brand | BLACKHORSE-RACING |
|---|---|
| Air Flow Capacity | 3000 cfm |
| Compatible Devices | Radiator |
| Dimensions | 16.05"L x 3.27"W x 16.05"H |
| Manufacturer | blackhorseracing |
| Material | Plastic |
| Model | B07GCGJBJX_CA NARF |
| Voltage | 12 volts |
| Wattage | 120 watts |
Listed on Amazon as: BLACKHORSE-RACING 16" 16 inch Electric Radiator Fan High 3000 + CFM Thermostat Wiring Switch Relay Kit Black
View on AmazonWhy it ranks #4: Its listed 16-inch fan delivers 3400 cfm, the highest stated airflow figure here, though the supplied details do not list a thermostat kit.
The ProForm fan lists 3,400 CFM, giving buyers a concrete airflow figure to consider for cooling in stop-and-go traffic. Its 16-inch straight-blade design runs on 12 volts and has a stated thickness of three inches, making those dimensions and electrical requirements central to installation planning.
The 16-inch fan measures 16.5 by 15.75 inches and is three inches thick, dimensions that help buyers assess radiator coverage and available clearance. Its 3,400 CFM rating is paired with a 12-volt specification, providing a defined airflow and electrical profile for a cooling setup. ProForm identifies preventing overheating in stop-and-go traffic as its intended use. The listing includes the electric fan, but does not describe a thermostat or mounting kit.
- Listed airflow capacity of 3,400 CFM
- 16-inch straight-blade fan
- 12-volt operation
- Stated dimensions include a three-inch thickness
- The listing includes the fan but does not specify a thermostat or mounting kit.
Skip it if you need thermostat controls and mounting hardware in the listed package; the BLACKHORSE-RACING B07GCGJBJX includes a thermostat kit and mounting pieces.
Consider this ProForm fan for a 12-volt setup where its 3,400 CFM rating and 16-inch size suit the cooling plan. Confirm available space using its stated dimensions; listed package details identify the fan alone.
Full product details
| Brand | ProForm |
|---|---|
| Compatible Devices | Universal |
| Included Components | Electric Cooling Fan |
| Manufacturer | PROFORM |
| Model | PFM67036 |
| Warranty Description | Limited |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: ProForm Electric Cooling Fan
View on Amazon
#5 · Strongest Motor
5. American Volt 16-17-Inch Fan
- Air Flow Capacity: 3189 cfm
- Material: Plastic
- Wattage: 180 W
- Voltage: 12 V
Best for: High-output reversible 17-inch fan.
Why it ranks #5: The reversible 16- to 17-inch fan has a 180-watt motor and listed airflow of 3189 cfm, with mounting brackets and tie straps included.
The American Volt fan combines a 180-watt motor with a listed 3,189 CFM output, providing a high-airflow option for buyers considering a larger radiator fan. It arrives configured as a puller but can reverse to pusher operation, and its mounting brackets and tie-strap kit are included.
Its 16.75-by-16-inch footprint and center thickness of four inches, tapering to 1.4 inches at the edge, help buyers evaluate radiator coverage and surrounding clearance. The 12-volt motor draws 15 amps, a useful electrical-planning figure alongside its listed 3,189 CFM airflow. Puller operation is the default, but reversibility supports a pusher arrangement when the installation calls for it. Brackets and a tie-strap kit provide mounting options.
- Listed airflow capacity of 3,189 CFM
- Reversible between puller and pusher operation
- Includes mounting brackets and tie-strap kit
- Dimensions specify thinner edges than center
- Its 180-watt motor draws 15 amps.
Skip it if you need a lower-draw 16-inch fan; the BLACKHORSE-RACING B07GCGJBJX lists a maximum draw of 11 amps.
This suits buyers who want a reversible, high-airflow fan and have space for its 16.75-by-16-inch footprint. Plan for the stated 15-amp draw, and account for its four-inch center thickness when checking clearance.
Full product details
| Brand | American Volt |
|---|---|
| Air Flow Capacity | 3189 cfm |
| Compatible Devices | Radiator |
| Included Components | Cord |
| Dimensions | 16"L x 4"W x 16.75"H |
| Manufacturer | American Volt |
| Material | Plastic |
| Model | AV-1117U |
| Voltage | 12 volts |
| Wattage | 180 watts |
Listed on Amazon as: 16-17 Inch Upgraded Big 180w Motor Electric Automotive Radiator Cooling Fan 12 Volt Reversible Air Flow Highest 3189 CFM
View on Amazon
#6
6. Mishimoto MMFAN-12
- Air Flow Capacity: 1150 cfm
- Material: Plastic
- Wattage: 98 W
- Voltage: 12.25 V
Best for: Low-profile 12-inch upgrade.
Why it ranks #6: This 12-inch fan measures 2.5 inches thick and lists 1150 cfm; a universal installation requires a separate Mishimoto mount kit.
Only 2.5 inches thick, the Mishimoto MMFAN-12 offers a compact 12-inch profile that can sit flush against a radiator, according to its product description. Its listed 1,150 CFM airflow and 98-watt rating make it an option for buyers balancing clearance with a defined airflow figure.
The 12-inch diameter and slim thickness can help address clearance constraints, while the product description identifies OEM-fan upgrades and aftermarket fitment issues as possible uses. Its 1,150 CFM capacity and 12.25-volt specification provide reference points for airflow and electrical planning. The fan has ten straight blades and one listed speed. For universal installation, the description says to use a Mishimoto universal fan mount kit, which is not identified among included components.
- Compact 2.5-inch overall thickness
- Listed airflow capacity of 1,150 CFM
- Ten straight blades
- Described for OEM upgrades and aftermarket fitment needs
- Universal installation calls for a separate Mishimoto fan mount kit.
Skip it if you need mounting hardware included with the fan; the American Volt AV-1117U lists brackets and a tie-strap kit.
Choose this for a compact 12-inch upgrade where its slim profile and 1,150 CFM figure fit the plan. Universal installation requires a Mishimoto mount kit, so account for that hardware and check the stated 12.25-volt specification.
Full product details
| Brand | Mishimoto |
|---|---|
| Air Flow Capacity | 1150 cfm |
| Blade Material | Plastic |
| Color | Black |
| Included Components | ACC Fans |
| Dimensions | 2.5"D x 2.5"W x 2.5"H |
| Item Weight | 1.03 kg |
| Manufacturer | Mishimoto |
| Material | Plastic |
| Model | JEGS |
| Model Number | MMFAN-12 |
| Number of Speeds | 1 |
| Recommended Uses | Cooling |
| Size | Stock |
| Style | Modern |
| Voltage | 12.25 volts |
| Warranty Description | Lifetime |
| Wattage | 98 watts |
Listed on Amazon as: Mishimoto MMFAN-12 Slim Electric Radiator Fan, 12" Universal Fit, 12.25 Volts, Black
View on Amazon
#7
7. Auto Dynasty 16-Inch Fan
- Air Flow Capacity: 1550 cfm
- Material: Plastic
- Wattage: 80 W
- Voltage: 12 V
Best for: Slim universal 16-inch fan.
Why it ranks #7: The 16-inch, 12-volt fan lists 1550 cfm and a slim design, but the listing says professional installation is recommended and instructions are not included.
A slim 16-inch design gives the Auto Dynasty fan a clearance-focused profile while leaving room for engine-bay modifications. Its listed 1,550 CFM airflow and 80-watt, 12-volt specifications give buyers practical reference points, and the product information describes cooling the radiator and other engine-bay systems.
The fan is specified for radiator use and described as helping cool the radiator, A/C system, intercooler, oil system, and transmission, supporting buyers looking beyond radiator airflow alone. Its slim profile is intended to create engine-bay clearance, while the 80-watt, 12-volt rating and 1,550 CFM figure inform electrical and airflow comparisons. The housing is described as ABS plastic. The listing notes that installation instructions are not included and recommends a professional installer.
- Slim 16-inch design supports engine-bay clearance
- Listed airflow capacity of 1,550 CFM
- 12-volt, 80-watt specifications
- Described for cooling several engine-bay systems
- Installation instructions are not included.
Skip it if you need included installation instructions for a DIY project; the DNA MOTORING RAF-12+FMK specifies an included mounting kit.
Consider this fan if a slim 16-inch profile and listed 1,550 CFM suit your radiator and engine-bay plan. Since instructions are not included and professional installation is recommended, factor that into your installation approach.
Full product details
| Brand | Auto Dynasty |
|---|---|
| Air Flow Capacity | 1550 cfm |
| Compatible Devices | Car Radiator |
| Included Components | As shown in the picture |
| Dimensions | 16"L x 16"W x 16"H |
| Item Weight | 4 pounds |
| Manufacturer | Auto Dynasty |
| Material | Plastic |
| Voltage | 12 volts |
| Wattage | 80 watts |
| Additional Information | Important information |
Listed on Amazon as: Auto Dynasty 16 inch Universal 12V Electric Radiator Cooling Fan Kit, Black
View on Amazon
#8
8. Thomletha 16-Inch Fan Kit
- Air Flow Capacity: 3000 cfm
- Material: Metal, Plastic
- Wattage: 80 W
- Voltage: 602 V
Best for: Direct-replacement cooling fan.
Why it ranks #8: It lists 3000 cfm and is sized at 15 inches by 15 inches, but its stated 602-volt specification makes electrical compatibility especially important to verify.
Thomletha describes this 16-inch fan as a direct replacement requiring no modification, a useful installation claim for buyers seeking a straightforward radiator or transmission-cooler swap. The listing gives a 3,000 CFM airflow capacity and 80-watt motor, alongside metal and plastic construction.
Its stated 15-by-15-by-15-inch dimensions provide a starting point for checking available installation space, and the 3,000 CFM capacity gives buyers an airflow figure for comparison. Thomletha lists radiator and transmission coolers as compatible devices, so the application extends beyond radiator use in the supplied specifications. The description also calls out low-noise operation and easy installation. However, the listed voltage is 602 volts, an unusual specification that buyers should resolve before electrical planning.
- Listed airflow capacity of 3,000 CFM
- Specified for radiator and transmission-cooler use
- Described as a direct replacement requiring no modification
- Metal and plastic construction
- The listed 602-volt specification is unusual and needs clarification before purchase.
Skip it if you need a clearly specified 12-volt setup; the STMGW 16-inch fan explicitly lists 12 volts and 3,000 CFM.
This may suit buyers considering a 16-inch replacement for a radiator or transmission cooler, especially where the direct-replacement claim fits. Resolve the unusual listed voltage and verify dimensions before planning the electrical connection.
Full product details
| Brand | Thomletha |
|---|---|
| Air Flow Capacity | 3000 cfm |
| Compatible Devices | Radiator, Transmission Coolers |
| Dimensions | 15"L x 15"W x 15"H |
| Item Weight | 2500 g |
| Manufacturer | Thomletha |
| Material | Metal, Plastic |
| Model | Does not apply |
| Voltage | 602 volts |
| Wattage | 80 watts |
Listed on Amazon as: 16" Electric Radiator Cooling Fan 3000CFM Kit
View on Amazon
#9
9. DNA Motoring 12-Inch Fan
- Material: Plastic
- Wattage: 80 W
- Voltage: 12 V
Best for: Slim engine-bay clearance.
Why it ranks #9: The slim 12-inch fan uses 80 watts and includes a mounting kit, but the supplied specifications do not give an airflow figure.
A slim 12-inch profile is the key feature of the DNA MOTORING RAF-12+FMK, helping preserve engine-bay clearance where a bulkier fan could constrain nearby components. Its push-or-pull configuration adds installation flexibility, while the included mounting kit supports a radiator-fan replacement or upgrade workflow.
The 12-volt, 80-watt fan is specified for radiator use, and the slim design is intended to provide more room for engine modifications. Push-or-pull operation gives installers a choice of airflow orientation for the application. The product information also describes cooling the radiator, A/C system, intercooler, oil system, and transmission, making it relevant to buyers considering broader engine-bay airflow. A fan and mounting kit are included; the supplied facts do not state an airflow rating.
- Slim design supports engine-bay clearance
- Can operate as a push or pull fan
- 12-volt, 80-watt electrical specifications
- Mounting kit is included
- No airflow capacity is provided in the supplied specifications.
Skip it if you need a stated CFM rating before choosing; the ProForm PFM67036 lists 3,400 CFM and a 16-inch fan.
Consider this 12-inch fan if limited engine-bay space and push-or-pull installation are priorities. Its supplied specifications omit CFM, so buyers selecting by a required airflow figure should compare documented ratings before choosing.
Full product details
| Brand | DNA MOTORING |
|---|---|
| Compatible Devices | Radiator |
| Included Components | 1 x Radiator Fan/Mounting Kit |
| Manufacturer | DNA MOTORING |
| Material | Plastic |
| Model | RAF-12+FMK |
| Voltage | 12 volts |
| Warranty Description | Please contact the seller directly for warranty information for this product |
| Wattage | 80 watts |
Listed on Amazon as: DNA Motoring 12 Inch High Performace Electric Cooling Slim Radiator Fan with Mount Kit, Black, RAF-12+FMK
View on Amazon
#10
10. BLACKHORSE-RACING 12-Inch Fan
- Air Flow Capacity: 800 cfm
- Material: Aluminum
- Wattage: 80 W
- Voltage: 12 V
Best for: Compact 12-inch puller fan.
Why it ranks #10: This pull-style 12-inch fan lists 800 cfm and 80 watts, making it a smaller, lower-airflow option than the listed 16-inch models.
At 2.36 inches thick, the BLACKHORSE-RACING ER9803 offers a particularly slim 12-inch pull-fan format for installations where engine-bay clearance matters. Its listed 800 CFM airflow and 80-watt, 12-volt specification give buyers concrete figures for comparing its compact footprint with their cooling requirements.
The 12.44-inch overall diameter and 2.36-inch thickness help assess whether this fan can fit a tighter radiator area, while its puller configuration identifies its intended airflow arrangement. The listed 800 CFM capacity and maximum 7.5-amp draw help inform electrical and cooling decisions. Mounting brackets and tie straps are included, giving installers hardware for mounting. The product information also describes heat and corrosion resistance, useful qualities for an automotive cooling component.
- Slim 2.36-inch thickness
- Configured for puller use
- Includes mounting brackets and tie straps
- Listed airflow capacity of 800 CFM
- Its listed 800 CFM airflow is modest for buyers seeking higher capacity.
Skip it if you need more listed airflow from a 12-inch fan; the Mishimoto MMFAN-12 specifies 1,150 CFM.
Pick this for a space-conscious radiator installation needing a 12-inch puller and included mounting hardware. Its 800 CFM rating is the key boundary: buyers prioritizing higher listed airflow should consider that figure against their cooling needs.
Full product details
| Brand | BLACKHORSE-RACING |
|---|---|
| Air Flow Capacity | 800 cfm |
| Compatible Devices | Radiator |
| Dimensions | 12.44"L x 12.44"W x 2.36"H |
| Item Weight | 1.18 kg |
| Manufacturer | blackhorseracing |
| Material | Aluminum |
| Model | ER9803 |
| Voltage | 12 volts |
| Wattage | 80 watts |
Listed on Amazon as: 12" inch Slim Fan Pull Electric Radiator Cooling Fans 12V Mount Kit Unversal Black
View on AmazonAvoiding airflow-direction and fitment mismatches
A fan that physically fits can still be unsuitable if its airflow direction or mounting arrangement does not match the radiator setup. The STMGW fan is configured as an air puller out of the box, with reversible blades; American Volt likewise comes set up as a puller and can be reversed to push. DNA Motoring describes its fan as usable in push or pull configurations, while the BLACKHORSE-RACING 12-inch model is described specifically as a pull fan.
These descriptions are not interchangeable: confirm the intended direction for your installation and follow the product’s wiring and blade instructions. Also compare actual dimensions, not just nominal fan size.
The Mishimoto fan is 12 inches in diameter and 2.5 inches thick, while the BLACKHORSE-RACING 16-inch listing gives a 16.05-inch diameter and 3.27-inch thickness. Check space around the radiator, nearby components, and mounting points before selecting a model.
Treat unusual electrical details as a compatibility warning
An inconsistent or unusual electrical specification is a reason to pause and verify compatibility before connecting a fan. Most listings here identify 12 volts, including the STMGW, labwork, and American Volt models, while the Thomletha listing states 602 volts. That figure differs sharply from the other listed fans and should not be treated as a confirmed vehicle-ready electrical match without checking the product documentation or seller.
Amperage also matters when planning a circuit: the BLACKHORSE-RACING 16-inch model lists a maximum draw of 11 amps, while American Volt says its 180-watt motor draws 15 amps. The STMGW kit lists a 40-amp relay and 30-amp circuit breaker, but that does not establish that every vehicle’s wiring or installation is suitable.
Confirm the fan’s verified voltage, current draw, fuse or breaker requirements, and wiring instructions against the vehicle and the kit before installation.
How to Choose an Electric Radiator Fan
Fan diameter and available clearance
Choose a fan diameter that fits the radiator area and leaves room for surrounding components. This set ranges from 12-inch models, including Mishimoto and DNA Motoring, to 16-inch options and American Volt’s 16- to 17-inch fan. Listed thickness varies too: Mishimoto measures 2.5 inches, BLACKHORSE-RACING’s 12-inch fan is 2.36 inches, and its 16-inch fan is 3.27 inches thick.
A smaller fan may suit a tight engine bay, while a larger model may better match a larger radiator if the mounting area allows. Measure the available space and compare it with the product’s stated dimensions; a nominal diameter is not a guarantee of vehicle fit.
Listed airflow capacity
Compare listed airflow figures, but use them alongside fan size and fitment rather than as a standalone guarantee of cooling performance. Among models with explicit capacity figures, the range runs from 800 cfm for the BLACKHORSE-RACING 12-inch fan to 3400 cfm for the ProForm 16-inch fan. Other 16-inch choices include 3000 cfm for STMGW and Thomletha and 1550 cfm for Auto Dynasty.
Mishimoto lists 1150 cfm for its 12-inch model. A buyer seeking a higher stated capacity can consider the ProForm or American Volt, which lists 3189 cfm.
For a compact installation, a 12-inch model may be more practical, but verify that its listed airflow and dimensions suit the application.
Power, controls, and kit contents
Check voltage, wattage, current draw, and included controls before choosing a fan, because the products differ in both power and installation components. Listed wattage ranges from 80 watts for the DNA Motoring, BLACKHORSE-RACING 12-inch, and Auto Dynasty fans to 180 watts for American Volt; several 16-inch kits list 120 watts. STMGW and BLACKHORSE-RACING include thermostat details of 180°F on and 165°F off, while American Volt includes mounting brackets and a tie strap kit.
Mishimoto lists 98 watts and says its universal mount kit is separate. These kits can suit buyers who want specified controls or hardware in the package; a simpler fan may suit an installation where the necessary mounting and control components are already available.
Verify unusual electrical figures before purchase.
Which Electric Radiator Fan Should You Choose?
For a 16-inch setup where you want listed airflow, thermostat control, and electrical kit components together, choose the STMGW 16-Inch Fan Kit. If reversible airflow and a thermostat wiring kit are priorities, the labwork 16-Inch Fan Kit is another suitable option. Choose the ProForm Electric Cooling Fan if the highest stated airflow figure matters most: it lists 3400 cfm, but the supplied details do not specify a thermostat kit.
For a compact 12-inch installation, the Mishimoto MMFAN-12 lists 1150 cfm and is 2.5 inches thick, though its universal mount kit is separate. Consider the American Volt 16-17-Inch Fan for its 3189 cfm listing and 180-watt motor.
Before deciding, match dimensions, airflow direction, voltage, and mounting needs to your vehicle.
Frequently Asked Questions
How do I determine the right fan diameter and clearance for my radiator?
Measure the radiator’s usable core area and the space available around it, including nearby hoses, pulleys, and other components. Compare those measurements with the fan’s dimensions and mounting method; a nominal diameter alone does not confirm fit. Also check fan depth and allow clearance for movement, wiring, and any shroud or mounting hardware.
Should an electric radiator fan push air or pull it through the radiator?
Use the direction that suits the fan’s position and the vehicle’s airflow layout. A puller sits behind the radiator and draws air through it; a pusher sits in front and pushes air through. Confirm the fan’s specified or reversible direction before installation, and make sure it does not work against the airflow from vehicle motion.
What electrical checks should I make before installing a radiator fan kit?
Check that the fan’s voltage and current requirements are compatible with the vehicle’s electrical system, then verify the wiring, relay, fuse or breaker, and grounding requirements. Follow the kit instructions and use appropriately rated connections and protection. Do not assume a universal-fit claim confirms electrical compatibility; consult a qualified installer if requirements are unclear.
What should I check about mounting hardware before choosing a fan?
Confirm whether the fan includes a mount kit, and check that its mounting approach suits your radiator and available space. Some listings specify a separate mount kit, so verify what is included rather than assuming. Avoid mounting methods that could damage the radiator core, and follow the fan and vehicle instructions for secure installation.
How should I compare airflow figures between fan listings?
Treat listed airflow as one comparison point, not a guarantee of cooling performance in your vehicle. Check that the figure is stated in the same units, and consider fan diameter, airflow direction, mounting, radiator fit, and electrical requirements together. The supplied product details do not establish that figures were measured under identical conditions.
Final Words
For a 16-inch setup seeking listed airflow, thermostat control, and electrical kit components together, the STMGW 16-Inch Fan Kit is the strongest all-around choice in this group. Consider labwork if reversible airflow is a priority, ProForm if its listed 3400 cfm figure is your main criterion, or Mishimoto for a compact 12-inch option. Before ordering, verify dimensions, direction, voltage, and mounting needs for your vehicle.



