Best Tongue Mount Bike Rack for Travel Trailers

#1 · Best Overall

1. Let's Go Aero Jack-It Double

• Load Capacity: 80 lb
• Material: Alloy Steel
• Weight: 36.4 lb
• dimensions: 30 x 20 x 8 in

Best for: Two-bike A-frame travelers.

Why it ranks #1: Mounts over the tongue jack on most A-frame travel and cargo trailers, carries two bikes, and lists an 80-pound capacity with stabilizing components.

Mounting directly over the tongue jack puts two bikes at the front of a travel or cargo trailer, freeing the rear hitch area for other cargo. The Jack-It combines BikeWing arms with curved SwayControl cradles, foam pads, and straps to help steady and protect bikes while towing.

Its tongue-jack mounting and A-frame attachment use space that would otherwise be occupied by the rear bike-carrying area, leaving that space available for cargo. The front-of-trailer position is described as the area with the least bounce, while SwayControl cradles, foam bumpers, and SwayStop straps add bike contact and restraint. The 80-pound capacity accommodates two bikes within the stated limit; its fit is for most A-frame travel and cargo trailers, not a universal fit for every trailer shape.

Skip it if you need a raised receiver for a separate RV-approved rack; the Stromberg Carlson CC-275 provides a 2-inch receiver.

Choose this for carrying two bikes on a compatible A-frame travel or cargo trailer while keeping the rear hitch area clear. Check the trailer’s A-frame arrangement and keep the combined bike load within 80 pounds.

Listed on Amazon as: Let's Go Aero – 429756 Jack-It Double Bike Carrier System

#2 · Best Direct Mount

2. Let's Go Aero Hitch-It

• Load Capacity: 80 lb
• Material: Rubber
• Weight: 23.6 lb
• dimensions: 5 x 33 x 12 in

Best for: Adjustable trailer-tongue carriers.

Why it ranks #2: Clamps to 2- to 4-inch tongue tubing and carries two bikes by their wheels, with adjustable cradles, Sway Stop straps, and an 80-pound capacity.

Adjustable clamping brackets fit trailer tongue tubing from 2 to 4 inches wide, giving the Hitch-It a defined range for mounting on varied trailer setups. Its wheel cradles, SwayStop straps, and NoMotion pins support two-bike transport, with an 80-pound listed capacity.

The adjustable brackets accommodate tongue tubing 2 to 4 inches wide, giving buyers a concrete measurement for checking the trailer before installation. Two bikes are carried by their wheels, while adjustable wheel cradles and SwayStop straps hold the wheels in place; NoMotion pins minimize wobble and can be padlocked. The 80-pound capacity sets the combined load limit. Its powder-coat finish is specified for protection from the elements, and the listing says it fits most adult and child bikes.

Skip it if you need a raised receiver for a separate hitch-mounted rack; the Swagman Straddler 80503 provides a 2-inch receiver.

This fits buyers seeking a two-bike carrier for trailer tongue tubing within the stated 2-to-4-inch width range. The 80-pound limit applies to the combined bike load, and the listed wheel cradles and straps provide the carrying interface.

Listed on Amazon as: Let's Go Aero – 731138 Hitch-It Double Bike Carrier System Black

#3 · Best Per-Bike Capacity

3. Let's Go Aero Jack-IT PRO

• Load Capacity: 40 lb per bike
• Material: Steel
• Weight: 45 lb
• dimensions: 34 x 25 x 6 in

Best for: Two-bike motion-control seekers.

Why it ranks #3: Designed for A-frame trailers, it carries two bikes at 40 pounds per bike and includes a PowerTower platform for additional hauling options.

Four-point Zero-G bicycle mounting is the Jack-IT PRO’s defining feature, intended to provide motion-free travel while carrying two bikes on an A-frame trailer. Its PowerTower platform adds hauling options, and the stated 40-pound-per-bike capacity gives buyers a clear per-bike limit.

The four-point Zero-G mounting system secures each bicycle at multiple points, a setup the product describes as supporting motion-free travel. A PowerTower platform adds hauling options beyond the two-bike carrying function, making the unit relevant to buyers who want more than basic bike transport. The rack is specified for towable RVs, trailers, and travel trailers, with a 40-pound capacity per bike. Tires up to 2.75 inches wide are listed; a fat-bike adapter is available separately.

Skip it if you need an integrated carrier with an 80-pound total capacity; the Lippert Components 429756 Jack-It lists that total limit.

This suits A-frame trailer owners seeking two-bike, four-point mounting and extra hauling options from a PowerTower platform. Check the 40-pound-per-bike limit and tire width; fat-bike use beyond 2.75 inches calls for a separate adapter.

Listed on Amazon as: Let’s Go Aero Jack-IT® PRO Two Bike TwinSpin Expandable Carrier (Model B02318)

#4

4. Let's Go Aero Jack-IT Plus

• Load Capacity: 40 lb
• Material: Alloy Steel
• Weight: 37 lb
• dimensions: 20 x 48 x 63 in

Best for: Two-bike RV carrier buyers.

Why it ranks #4: This integrated two-bike carrier is compatible with RVs and travel trailers, but its listed 40-pound load capacity is lower than the 80-pound direct-carrier options.

The Jack-IT Plus is a complete two-bike carrier for RVs, trailers, and travel trailers, giving buyers a named carrier option rather than only a receiver bunk. Its alloy-steel construction and 40-pound load capacity provide the principal specifications to weigh when planning what bikes to transport.

Because the listing identifies the Jack-IT Plus as a two-bike carrier and names RVs, trailers, and travel trailers as compatible vehicle types, it is aimed at buyers seeking a carrier for a towable setup. Alloy steel is the specified material, while the 40-pound capacity sets the load boundary for the bikes being carried. An optional straight stinger is included in the component listing as an optional item; the supplied information does not give mounting dimensions or further operating details.

Skip it if you need a listed 80-pound total capacity; the Let's Go Aero 429756 Jack-It Double Bike Carrier System specifies that load limit.

Choose this for a two-bike carrier when your setup is an RV, trailer, or travel trailer and the combined bike load fits the 40-pound limit. The supplied details do not specify mounting dimensions, so installation fit remains a boundary.

Listed on Amazon as: Let’s Go Aero Jack-IT® Plus Two Bike Carrier (Model B00338), Black

#5 · Most Adaptable Fit

5. Swagman Straddler

• Material: Alloy Steel
• Weight: 26 lb
• dimensions: 30 x 12 x 6 in

Best for: Existing hitch-rack trailer owners.

Why it ranks #5: Its telescoping and rotating legs clamp to varied A-frame designs and create a 2-inch receiver; the stated total capacity is up to 100 pounds.

The Swagman Straddler creates a 2-inch receiver on an A-frame trailer tongue, enabling owners to carry an existing hitch-mounted bike rack while towing. Its steel construction, adjustable telescoping and rotating legs, and 100-pound total capacity address frame fit and carrying needs.

The 2-inch receiver gives an existing hitch-mounted bike rack a connection point at the trailer’s nose, allowing the trailer and rack to be used together. Telescoping and rotating legs clamp onto the triangular A-frame, helping the adapter accommodate different trailer frame designs. The stated total capacity is 100 pounds and the product description says it can transport up to two bikes. Buyers should account for the combined carried load and verify the trailer frame works with the adjustable legs.

Skip it if you need included bike arms and wheel cradles; the Let's Go Aero Jack-It 429756 includes those carrier components.

Choose the Straddler if you already have a hitch-mounted rack and want to carry it on a compatible trailer A-frame while towing. The adapter’s 100-pound total capacity includes the carried setup, not just the bikes.

Listed on Amazon as: Swagman Straddler RV Hitch Adapter – A-Frame Trailer Tongue Mount for Bike Racks and Cargo Carriers

#6 · Widest Stated Fit

6. Stromberg Carlson CC-275

• Material: Metal
• Weight: 44 lb
• dimensions: 14 x 8 x 41 in

Best for: RV-approved rack owners.

Why it ranks #6: The adjustable bike bunk fits a stated 14- to 55-inch A-frame mounting width and supports up to 100 pounds, but requires a separate receiver rack.

A raised 2-inch receiver turns this trailer tongue bunk into a mounting point for an RV-approved bike rack, rather than a bike carrier with its own arms. Its adjustable 14-to-55-inch A-frame range and 100-pound capacity suit travelers who already have compatible receiver-mounted rack equipment.

The raised receiver lets an owner attach an RV-approved 2-inch receiver bike rack, so the bunk serves as the trailer-side mounting structure rather than replacing the rack itself. Its 14-to-55-inch adjustable A-frame mounting range accommodates a range of tongue widths, while the 100-pound stated capacity sets a clear load ceiling for the carried setup. Confirm that the existing rack is RV-approved and that the trailer’s A-frame falls within the listed width range before planning a trip.

Skip it if you want a complete two-bike carrier in one unit; the Let's Go Aero Jack-It 429756 includes its own BikeWing arms.

This suits RV owners who already own an RV-approved 2-inch receiver rack and want to mount it at the trailer tongue. Its stated width range is 14 to 55 inches, and the complete carried load must stay within 100 pounds.

Listed on Amazon as: Stromberg Carlson CC-275 Trailer Tongue Cargo Bike Bunk – Adjustable Trailer Tongue Rack for RVs, Supports Up to 100 lbs, Fits RV Approved 2" Receiver Bike Racks, 14" -55" A-Frame Mounting Width Range

#7

7. Quick Products QP-BBB

• Material: Alloy Steel
• dimensions: 33.2 x 8.4 x 8 in

Best for: Receiver accessory haulers.

Why it ranks #7: Fits A-frame tongues 14 to 55 inches wide and provides a 2-inch receiver with 100-pound capacity for compatible bike racks or cargo trays.

A raised 2-inch receiver lets the Quick Products QP-BBB accept compatible bike racks and cargo trays, turning unused A-frame space into a flexible carrying point. Its 14-to-55-inch mounting range and 100-pound capacity make it a practical option for owners choosing receiver-mounted accessories.

The receiver accepts 2-inch accessories, including bike racks and cargo trays, so the bunk can serve more than one hauling purpose. Its stated 14-to-55-inch A-frame width range helps buyers check tongue compatibility, and the 100-pound capacity defines the maximum listed load. A durable black powder-coat finish is specified, while the product’s elevated position over the trailer tongue can also accommodate standard LP tank fixtures as described in the product information.

Skip it if you want a self-contained carrier with bike arms and cradles; the Lippert Components 429756 Jack-It includes those components.

Pick this bunk if you want to use a compatible 2-inch bike rack or cargo tray on an A-frame measuring 14 to 55 inches wide. Keep the total carried load within 100 pounds and account for any mounted accessory’s weight.

Listed on Amazon as: Quick Products QP-BBB Trailer Tongue Bike Bunk Black 100 lb. Capacity

#8

8. KUAFU Trailer Tongue Bike Bunk

• Load Capacity: 100 lb
• Material: Steel
• Weight: 20.46 kg

Best for: Propane-area tongue bunk users.

Why it ranks #8: This 100-pound steel bunk fits most A-frames 14 to 55 inches wide, subject to its stated rod-height limit and possible propane or brake-box clearance issues.

A stated fit for most A-frame trailers 14 to 55 inches wide, with rods no higher than 6 inches, makes the KUAFU bunk’s key advantage clear: defined mounting boundaries. Its 100-pound capacity and propane-tank guidance help owners assess both load and access before positioning a tongue-mounted rack.

The specified width and rod-height limits give buyers concrete measurements to compare with their trailer before installation. The product listing also addresses propane access: a soft vinyl cover can preserve valve access without detaching the crossbar, while a flip-top hard cover requires crossbar removal for refills. If an emergency brake box obstructs installation, the supplied guidance says to relocate it forward or atop the A-frame. The 100-pound capacity applies to the carried load.

Skip it if you need a wider stated adjustment span beginning at 12 inches; the Neorexon Upgrade Trailer Tongue Cargo Bike Bunk starts there.

This bunk fits buyers whose A-frame falls within the stated 14-to-55-inch width and 6-inch rod-height limits. Review propane and emergency-brake-box clearance, since those surrounding components can affect installation and tank access.

Listed on Amazon as: KUAFU Trailer Tongue Bike Bunk Compatible with Most A Frame Trailers

#9

9. Neorexon Trailer Bike Bunk

• Load Capacity: 100 lb
• Material: Carbon Steel

Best for: Wide-range A-frame bunk shoppers.

Why it ranks #9: The adjustable A-frame bunk spans a stated 12- to 45-inch width and provides a 2-inch receiver with 100-pound capacity for a compatible separate rack.

Its adjustable 12-to-45-inch A-frame width gives this Neorexon bunk a broader stated lower-end range than many tongue bunks, helping owners fit narrower trailer frames. The raised 2-inch receiver provides a place to attach compatible bike-carrying equipment, with a listed capacity of 100 pounds.

The 12-to-45-inch adjustment range helps accommodate different A-frame widths, so buyers can compare their trailer measurements against the bunk’s stated span before installation. A raised 2-inch receiver provides the connection point for bike-carrying equipment, rather than specifying an integrated set of bike arms. Its 100-pound capacity establishes the listed load limit, and the carbon-steel construction identifies the material; the product is specified for trailer use and includes assembly instructions.

Skip it if you need a bunk listed for A-frames up to 55 inches wide; the KUAFU BL2008 covers a 14-to-55-inch range.

Consider this raised-receiver bunk if your trailer A-frame measures within 12 to 45 inches and you have compatible carrying equipment. The receiver is the attachment point, so this listing does not specify an included bike carrier.

Listed on Amazon as: Upgrade Trailer Tongue Cargo Bike Bunk

#10

10. ALMULOO Trailer Bike Bunk

• Load Capacity: 3E+1 lb
• Material: Alloy Steel
• Weight: 37.5 lb
• dimensions: 38.98 x 10.24 x 9.06 in

Best for: Narrow-load A-frame bunk users.

Why it ranks #10: This A-frame bunk provides a square receiver for a separate rack, but its listed load capacity is 30 pounds, substantially below the other stated bunk capacities.

Its stated fit for 14-to-55-inch A-frame widths and rods up to 6 inches tall gives the ALMULOO bunk measurable installation boundaries. The alloy-steel bunk positions a square receiver above trailer water tanks to preserve interior space, while its listed 30-pound capacity is a key load constraint.

The width and height limits help owners compare the bunk with the trailer tongue before installation, and the listing provides options for handling propane access and an obstructing emergency brake box. A square receiver positioned above water tanks can keep bikes out of the trailer interior, according to the supplied product facts. The stated capacity is 30 pounds, so the intended setup must remain within that load limit. Hardware and installation instructions are included.

Skip it if you need a 100-pound-capacity bunk; the Quick Products QP-BBB lists that limit and a 14-to-55-inch mounting range.

This is for trailer owners who value a square receiver positioned above water tanks and whose carried setup weighs no more than 30 pounds. Measure the A-frame against its 14-to-55-inch width and 6-inch height limits.

Listed on Amazon as: ALMULOO Trailer Tongue Bike Bunk for A-Frame Trailers 14"-55" Width, Steel